Efficient Removal of Pb(Ii) from Water Using Magnetic Fe3s4/Reduced Graphene Oxide Composites

Long Kong,Zhichun Li,Xueqiong Huang,Shouqiang Huang,Hua Sun,Min Liu,Liang Li

DOI: https://doi.org/10.1039/c7ta05389d

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Magnetic Fe3S4/rGO was prepared by the in situ sulfuration of Fe3O4/rGO, which showed much greater Pb(ii) removal performance than pristine Fe3O4/rGO.

What problem does this paper attempt to address?

Facile self-assembly synthesis of titanate/Fe3O4 nanocomposites for the efficient removal of Pb2+ from aqueous systems

Yanglong Hou,Meiping Tong,Fei Liu,Hanbin Liao,Li Cai,Yin-jia Jin

DOI: https://doi.org/10.1039/C2TA00099G

Abstract:We report a novel process for the self-assembly of Fe3O4 nanoparticles (NPs) onto titanate nanotubes (TNTs), nanofibers (TNFs) and nanosheets (TNSs) to synthesize magnetic titanate nanocomposites. Both coulombic and van der Waals forces made important contributions to control the assembly process, in which the Fe3O4 NPs were uniformly dispersed onto the surfaces of the titanate nanostructures by a facile acid-induced method. The Fe3O4 NPs possessed unique magnetic properties for adsorbent separation, while the structures of the titanates determined the efficiency of Pb2+ removal. Interestingly, it was found that Pb2+ can be completely and quickly removed by the TNTs/Fe3O4 and TNSs/Fe3O4 nanocomposites. It is worth noting that the TNTs/Fe3O4 nanocomposite possessed the maximum adsorption capacity of 382.3 mg g−1, displaying a high efficiency for Pb2+ removal. The effects of pH value and contact time at different initial Pb2+ concentrations have been investigated. Based on the characterization results of X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy, a possible removal mechanism was proposed. This work provides a facile and general approach to synthesize magnetic functional nanocomposites for water treatment.

Materials Science,Chemistry,Environmental Science
Judicious fabrication of bifunctionalized graphene oxide/MnFe2O4 magnetic nanohybrids for enhanced removal of Pb(II) from water

Kang Dai,Guyue Liu,Wenbin Xu,Zhenzhen Deng,Yutong Wu,Chuwen Zhao,Zijian Zhang

DOI: https://doi.org/10.1016/j.jcis.2020.06.085

IF: 9.9

2020-11-01

Journal of Colloid and Interface Science

Abstract:Novel ternary nanohybrids, bifunctionalized graphene oxide/MnFe2O4 magnetic nanoparticles (PEHA-Phos-GO/MnFe2O4), were prepared by a facile method and applied for the removal of Pb(II) from aqueous solution. Attributing to the numerous amino and phosphate groups on the bifunctionalized GO nanosheets as well as the magnetic nanoparticles of MnFe2O4, PEHA-Phos-GO/MnFe2O4 demonstrated high removal efficiency of Pb(II) and rapid magnetic separation. The 366.4 mg/g maximum adsorption capacity of Pb(II) on PEHA-Phos-GO/MnFe2O4 was obtained at the optimal adsorption pH of 5.5, much higher than that on GO (212.1 mg/g). The kinetics and isotherm data indicated that the adsorption processes can be well described by the pseudo-second-order kinetics and the Langmuir model. For the adsorption of Pb(II) on PEHA-Phos-GO/MnFe2O4, thermodynamic studies revealed the endothermic nature of the spontaneous adsorption process. The exhibited adsorption capacity, easy magnetic separation and reusability make the PEHA-Phos-GO/MnFe2O4 nanohybrids very promising adsorbents for efficacious removal of heavy metals from aqueous solutions in environmental pollution cleanup.

chemistry, physical
Synthesis and Characterization of Reduced Graphene Oxide-Supported Nanoscale Zero-Valent Iron (nzvi/rgo) Composites Used for Pb(II) Removal

Mingyi Fan,Tongjun Li,Jiwei Hu,Rensheng Cao,Qing Wu,Xionghui Wei,Lingyun Li,Xuedan Shi,Wenqian Ruan

DOI: https://doi.org/10.3390/ma9080687

IF: 3.4

2016-01-01

Materials

Abstract:Reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO) composites were prepared by chemical deposition method and were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, N2-sorption and X-ray photoelectron spectroscopy (XPS). Operating parameters for the removal process of Pb(II) ions, such as temperature (20–40 °C), pH (3–5), initial concentration (400–600 mg/L) and contact time (20–60 min), were optimized using a quadratic model. The coefficient of determination (R2 > 0.99) obtained for the mathematical model indicates a high correlation between the experimental and predicted values. The optimal temperature, pH, initial concentration and contact time for Pb(II) ions removal in the present experiment were 21.30 °C, 5.00, 400.00 mg/L and 60.00 min, respectively. In addition, the Pb(II) removal by nZVI/rGO composites was quantitatively evaluated by using adsorption isotherms, such as Langmuir and Freundlich isotherm models, of which Langmuir isotherm gave a better correlation, and the calculated maximum adsorption capacity was 910 mg/g. The removal process of Pb(II) ions could be completed within 50 min, which was well described by the pseudo-second order kinetic model. Therefore, the nZVI/rGO composites are suitable as efficient materials for the advanced treatment of Pb(II)-containing wastewater.
Simultaneous removal of Sb(III) and Sb(V) from mining wastewater by reduced graphene oxide/bimetallic nanoparticles

Wei Chen,Ze Lin,Zhenxian Chen,Xiulan Weng,Gary Owens,Zuliang Chen

DOI: https://doi.org/10.1016/j.scitotenv.2022.155704

2022-08-25

Abstract:Antimony (Sb) contamination is a significant environmental issue in mining impacted areas, where the use of nanomaterials to remove such metalloid species has attracted much research attention. In this study, the simultaneous removal of Sb(III) and Sb(V) was investigated using a reduced graphene oxide/Fe/Ni (rGO-Fe/Ni NPs) composite. Compared to rGO alone the composite exhibited enhanced removal efficiency. For rGO-Fe/Ni NPs the maximum Sb(III) and Sb(V) adsorption capacities were 2.00 and 1.41 mg·g−1, respectively, compared to 1.70 and 1.02 mg·g−1 for Sb(III) and Sb(V), respectively, when using rGO only. This indicated that Fe/Ni enhanced the simultaneous removal of Sb(III) and Sb(V). Advanced characterization via SEM and XPS before and after exposure to Sb indicated that both Sb(III) and Sb(V) were adsorbed on to the surface of rGO-Fe/Ni NPs, followed by oxidation of Sb(III) to Sb(V). Adsorption and oxidation kinetics both conformed to pseudo-second order models, where the mechanism for the simultaneous removal of Sb(III) and Sb(V) by rGO-Fe/Ni NPs involved a combination of both adsorption and oxidation. Moreover, the practical adsorption capacity of rGO-Fe/Ni was not limited to Sb, since in a real mining wastewater; containing a mixture of metal(loid)s, while rGO-Fe/Ni exhibited a Sb adsorption capacity of 1.59 mg·g−1, it also exhibited similar adsorption capacities for As (2.61 mg·g−1), Pb (2.41 mg·g−1), and Cd (1.25 mg·g−1). The composite was also highly reusable with a removal efficiency for Sb(III) as high as 72.7% after 4 cycles of use. Thus, rGO-Fe/Ni NPs has significant potential for the practical removal of Sb species and other heavy metal(loid)s in mining impacted wastewaters.

environmental sciences
Removal performance and mechanism of Fe3O4/graphene oxide as an efficient and recyclable adsorbent toward aqueous Hg(II)

Chaoke Bulin,Bo Li,Yanghuan Zhang,Bangwen Zhang

DOI: https://doi.org/10.1007/s11164-020-04217-5

IF: 3.134

2020-07-28

Research on Chemical Intermediates

Abstract:Decontamination of aqueous heavy metal is a challenging task of environmental remediation. Herein, we demonstrated an adsorptive method for efficient removal of aqueous Hg(II) using a magnetic nanocomposite Fe3O4/graphene oxide (Fe3O4/GO). Adsorption of Hg(II) onto Fe3O4/GO equilibrated in 4 min, with the adsorption percent and quantity of 91.17% and 547.01 mg g−1, respectively. Fe3O4/GO can be easily recovered from solution via magnetic separation for reuse, and retaining 73.5% of its original capacity after five consecutive cycles. The Temkin model and PSO model were most suitable for describing adsorption in equilibrium and non-equilibrium state, respectively. Both GO and Fe3O4 adsorbed Hg(II) via donating electrons in oxygen atoms toward Hg(II). Moreover, GO made a major contribution, while Fe3O4 made a minor one to adsorption. The facile preparation, high adsorption efficiency, easy recovery, and reusability may enable Fe3O4/GO to be a promising adsorbent for aqueous Hg(II).

chemistry, multidisciplinary
Multifunctional Nanocomposite Fe3O4@SiO2–mPD/SP for Selective Removal of Pb(ii) and Cr(vi) from Aqueous Solutions

Lisha Tan,Jiang Xu,Xiaoqin Xue,Zimo Lou,Jin Zhu,Shams Ali Baig,Xinhua Xu

DOI: https://doi.org/10.1039/c4ra08040h

IF: 4.036

2014-01-01

RSC Advances

Abstract:Silica-coated magnetite (Fe3O4@SiO2) nanoparticles functionalized with amino, imino and sulfonic groups (Fe3O4@SiO2–mPD/SP) were successfully synthesized via a facile chemical oxidative polymerization of m-phenylenediamine (mPD) and m-sulfophenylenediamine-4-sulfonic acid (SP) monomers, and utilized for selective removal of Pb(ii) and Cr(vi) from aqueous solutions.
Intensified Electrosorption of Pb2+ by 2, 6-diaminoanthraquinone/Graphene Composite Electrode

Sheng-yao JIN,Yang XIANG,Jun-yu ZHANG,Kai ZHANG,Qing-hua JI

DOI: https://doi.org/10.13227/j.hjkx.201902102

2019-01-01

Abstract:The key to efficient removal of heavy metal ions from water by electrosorption is to develop electrode materials with excellent performance. In this study, 2,6-diaminoanthraquinone (DA)-modified reduced graphene oxide (rGO) was used to prepare a DA@rGO composite electrode using the solvothermal method. The electrochemical properties, electrosorption of Pb, adsorption kinetics, and cycle regeneration performance of the composite electrode were investigated. Cyclic voltammetry showed that the composite electrode had excellent electrochemical properties, and the specific capacitance reached 304.4 F·g at a current density of 1 A·g. The DA modification significantly increased the pseudocapacitance of the composite electrode. The electrosorption Pb test showed that optimal electrosorption was achieved with -1.2 V of the applied voltage, and the removal rate of the Pb reached 94.8% after 60 min. The electrosorption process is in accord with the first-order kinetic equation. The saturated adsorption capacity of Pb obtained by the Langmuir model was 356.66 mg·g, which is significantly higher than that of rGO electrode, at 319.40 mg·g. The increase in Pb adsorption amount of the composite electrode can be attributed to the increase in capacitance caused by DA modification. Treatment with 0.5 mol·L nitric acid can desorb the Pb within 5 min to achieve regeneration of the composite electrode. After 10 adsorption-desorption cycles, the adsorption removal rate of Pb by the composite electrode was kept at 88%, indicating robust stability.
Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: Adsorption behavior and process study

Jianhui Zhao,Jie Liu,Ning Li,Wei Wang,Jun Nan,Zhiwei Zhao,Fuyi Cui

DOI: https://doi.org/10.1016/j.cej.2016.07.003

IF: 15.1

2016-11-01

Chemical Engineering Journal

Abstract:In this study, magnetic Fe3O4-MnO2 nanoplates were successfully synthesized by a facile hydrothermal process in order to remove bivalent heavy metals from water. The Fe3O4 part facilitated the reclamation of the adsorbent. Meanwhile, the modification by amorphous MnO2 could significantly enhance the specific surface area of Fe3O4-MnO2 and decrease the point of zero charge, thus ensured the good adsorption capacity for metal cations. The adsorption isotherms and kinetics of the five metal ions on Fe3O4-MnO2 and the pH effect on removal efficiency were detailedly investigated. Sips isotherm was the most suitable model to describe Pb2+, Cu2+, Cd2+ and Zn2+ adsorption on Fe3O4-MnO2, while Temkin, Redlich-Peterson and Langmuir models showed a higher fitting degree for Ni2+. The adsorption capacities of Pb2+, Cu2+, Cd2+, Zn2+ and Ni2+ on Fe3O4-MnO2 were 208.17, 111.90, 169.90 100.24 and 55.63mg/g, respectively. Kinetic data were better fitted to pseudo-second-order model (R 2 >0.99), indicating a dominant role of chemisorption. Further analysis of infrared spectra demonstrated that the adsorption process was achieved mainly by ion exchange and complexation. The adsorption rates and preference ranking of metal ions on Fe3O4-MnO2 were in the same order: Pb2+ >Cu2+ >Cd2+ >Zn2+ >Ni2+. Moreover, the adsorbent showed good recyclability and excellent ability of neutralizing the solutions by surface protonation and deprotonation. Overall, the reported results here have significant implications for removing metal cations from water in practice.

engineering, chemical, environmental
Facile Self-Assembly Synthesis of Titanate/fe3o4nanocomposites for the Efficient Removal of Pb2+from Aqueous Systems

Fei Liu,Yinjia Jin,Hanbin Liao,Li Cai,Meiping Tong,Yanglong Hou

DOI: https://doi.org/10.1039/c2ta00099g

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:We report a novel process for the self-assembly of Fe3O4 nanoparticles (NPs) onto titanate nanotubes (TNTs), nanofibers (TNFs) and nanosheets (TNSs) to synthesize magnetic titanate nanocomposites. Both coulombic and van der Waals forces made important contributions to control the assembly process, in which the Fe3O4 NPs were uniformly dispersed onto the surfaces of the titanate nanostructures by a facile acid-induced method. The Fe3O4 NPs possessed unique magnetic properties for adsorbent separation, while the structures of the titanates determined the efficiency of Pb2+ removal. Interestingly, it was found that Pb2+ can be completely and quickly removed by the TNTs/Fe3O4 and TNSs/Fe3O4 nanocomposites. It is worth noting that the TNTs/Fe3O4 nanocomposite possessed the maximum adsorption capacity of 382.3 mg g(-1), displaying a high efficiency for Pb2+ removal. The effects of pH value and contact time at different initial Pb2+ concentrations have been investigated. Based on the characterization results of X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy, a possible removal mechanism was proposed. This work provides a facile and general approach to synthesize magnetic functional nanocomposites for water treatment.
Facile fabrication of sodium carboxymethyl cellulose/reduced graphene oxide composite hydrogel and its application for Pb(II) removal

Yakun Zhang,Runmin Huang,Jingang Yu,Xinyu Jiang

DOI: https://doi.org/10.1049/mna2.12004

2020-12-29

Abstract:The sodium carboxymethyl cellulose/reduced graphene oxide (rGO‐CMC) composite hydrogel was fabricated via environmental friendly one‐step hydrothermal reduction method. The morphology, pore structure and surface properties of the as‐prepared sample were characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area measurement and zeta potential analyser, respectively. To investigate the adsorption behaviour of rGO‐CMC for Pb(II), effects of contact time, temperature, initial concentration and pH were studied in detail. The rGO‐CMC composite before and after adsorption of Pb(II) was analysed by Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy to further explore adsorption mechanism. Compared with rGO, the adsorption capacities of rGO‐CMC‐3 composite for heavy metals including Pb(II), Cu(II), Ni(II), Mn(II), Co(II) were increased to 156.85, 35.70, 21.40, 20.85 and 15.80 mg g−1, respectively. In addition, the rGO‐CMC composite formed a complete aerogel after freeze‐drying, which confirms its great potential as an easily separable adsorbent to remove heavy metals in aqueous solutions.

materials science, multidisciplinary,nanoscience & nanotechnology
A Facile Synthesis of RGO-Ag2MoO4 Nanocomposites for Efficient Lead Removal from Aqueous Solution

Mohd Shoeb,Fouzia Mashkoor,Mohmmad Naved Khan,Changyoon Jeong

DOI: https://doi.org/10.3390/molecules29215152

IF: 4.6

2024-10-31

Molecules

Abstract:Efficiently treating wastewater, particularly the elimination of heavy metal ions from water systems, continues to be one of the most pressing and complex challenges in modern environmental management. In this work, reduced graphene oxide coupled silver molybdate binary nanocomposites (RGO-Ag2MoO4 NCs) have been prepared via hydrothermal method. The crystalline nature and surface properties of the developed RGO-Ag2MoO4 NCs were proved by XRD, FTIR, SEM, and EDS techniques. Adsorption experiments demonstrated that the nanocomposites (NCs) effectively removed Pb(II) ions within 120 min, achieving a maximum removal efficiency ranging from 94.96% to 86.37% for Pb(II) concentrations between 20 and 100 mg/L at pH 6. Kinetic studies showed that the adsorption process followed a pseudo-second order model. Isotherm analysis presented that the Langmuir model provided the greatest fit for the equilibrium data, with a monolayer adsorption capacity of 128.94 mg/g. Thermodynamic analysis revealed that the adsorption process was spontaneous and endothermic. The results of this study highlight RGO-Ag2MoO4 NCs as a highly promising and eco-friendly material for the effective elimination of Pb(II) ions from wastewater. Their strong adsorption capacity, coupled with sustainable properties, makes them an efficient solution for addressing lead contamination, offering significant potential for practical applications in water treatment systems.

chemistry, multidisciplinary,biochemistry & molecular biology
Achieving High-Efficiency and Ultrafast Removal of Pb(ii) by One-Pot Incorporation of a N-doped Carbon Hydrogel into FeMg Layered Double Hydroxides

Lili Ling,Wu-Jun Liu,Shun Zhang,Hong Jiang

DOI: https://doi.org/10.1039/c6ta02737g

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Lead (Pb) is one of the most widespread toxic heavy metals in water distribution systems and surface water, and how to quickly and completely remove Pb from the water has received global concern. Here we designed and synthesized a 3D nitrogen doped carbon hydrogel/FeMg layered double hydroxide (NC–FeMg LDH) nanocomposite through a one-pot solvothermal process and investigated the Pb removal efficiency and underlying mechanism. Multiple characterization methods including XRD, FTIR, and TEM confirmed that the 3D NC–FeMg LDH is formed by incorporating 2D FeMg-LDH nanosheets with the nitrogen doped carbon hydrogel which is in situ formed in the solvothermal carbonization of glucosamine. The as-synthesized 3D NC–FeMg LDH shows favorable performance in the removal of Pb from aqueous solution with very short equilibrium time (2 min) and large adsorption capacity (344.8 mg g−1). The excellent removal performance toward Pb is demonstrated to be a structure-dependent multiplex surface chemical process between Pb and LDH involving Mg2+/Pb2+ ion exchange, Pb/CO or OC–O, and Pb/pyrrolic N surface complexation. This work may provide an idea for designing hybrid functional materials for selective and high-efficiency removal of other heavy metals from polluted water.
In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

Zongwu Wang,Qing Wu,Jing Zhang,Huan Zhang,Jinglan Feng,Shuying Dong,Jianhui Sun

DOI: https://doi.org/10.1007/s11356-019-06511-1

IF: 5.8

2019-09-14

Environmental Science and Pollution Research

Abstract:The efficient removal of heavy metals from aqueous environment is imperative and challenging. A novel ternary composite constructed of diaminopyridine polymers, graphene oxide, and ferrite magnetic nanoparticles was designed by a facile in situ polymerization strategy for the removal of Pb(II) from aqueous solution. Detailed characterization of morphological, chemical, and magnetic properties was employed systematically to confirm the formation of the composite material. Batch adsorption experiment studies suggested that the composite was an excellent adsorbent for Pb(II) which was easily collected after use via exposure to an external magnetic field for 30 s. The effects of different parameters such as solution pH, adsorbent dosage, contact time, initial Pb(II) concentration, temperature, and co-existing ions were examined. The maximum adsorption capacity at pH = 5 was estimated to be 387.2 mg g−1 at 298 K by the Langmuir isotherm model, accompanied by favorable adsorption recyclability according to the investigation of regeneration experiments. Thermodynamic studies revealed that the Pb(II) adsorption via our ternary composite was endothermic and spontaneous. The corresponding removal performance for effluent containing Pb(II) from the battery industry was successfully examined. The present results indicated that our designed adsorbent is beneficial to the practical Pb(II) removal in wastewater purification.

environmental sciences
Hierarchical 13X zeolite/reduced graphene oxide porous material for trace Pb (II) capturing from drinking water

Yanzhao Shi,Xueying Ren,Hong Zheng,Yu Zhang,Qi Zuo

DOI: https://doi.org/10.1016/j.micromeso.2021.111540

IF: 5.876

2022-01-01

Microporous and Mesoporous Materials

Abstract:The removal of lead in drinking water has attracted considerable attention of researchers in recent years, especially, the trace characteristic of lead is a challenge to water treatment. Herein, 13X zeolite/reduced graphene oxide composite material (13X-rGO) with hierarchically porous structure was successfully prepared using graphene oxide (GO) and 13X zeolite via a chemical reduction method and presented great performance for removing trace Pb(II) from drinking water. The influence of some important parameters including adsorbent dosage, contact time, initial lead concentration, coexisting competing ions, solution pH value, etc. on the removal of Pb(II) was systematically investigated. The composite material showed better adsorption properties compared with a single component and their physical mixture, confirming the synergistic effect of rGO and 13X zeolite on Pb(II) adsorption. The effluent lead concentration could be decreased to the level permitted by World Health Organization (WHO) (<10 ppb) within 30 s under calcium content of 20 ppm and initial lead concentration of 150 ppb. Simultaneously, the as-prepared 13X-rGO performed excellent adsorption capacity meeting WHO standard (6.07 mg/g), which was about 2.23 times that of single 13X zeolite (2.72 mg/g). In the presence of interfering ions, the lead concentration could still be reduced to safe drinking water standard. Moreover, the adsorbent could be effectively regenerated by saturated sodium chloride solution. Therefore, 13X-rGO can be introduced as a promising adsorption material for the purification of drinking water contaminated with trace lead owing to rapid adsorption, low cost and recycling potential.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
Rapid Removal and Separation of Iron(ii) and Manganese(ii) from Micropolluted Water Using Magnetic Graphene Oxide.

Han Yan,Haijiang Li,Xue Tao,Kun Li,Hu Yang,Aimin Li,Shoujun Xiao,Rongshi Cheng

DOI: https://doi.org/10.1021/am502377n

IF: 9.5

2014-01-01

ACS Applied Materials & Interfaces

Abstract:A novel two-dimensional carbon-based magnetic nanomaterial, magnetic graphene oxide (MGO), was prepared and then used as an efficient adsorbent. MGO showed rapid and complete removal of iron(II) (Fe) and manganese(II) (Mn) from micropolluted water bodies over a wide pH range. After saturated adsorption, MGO could be rapidly separated from water under an external magnetic field. Results of the adsorption equilibrium study indicated that the adsorption of Fe and Mn by MGO took place via monolayer heterogeneous and spontaneous processes resulting from the heterogeneity of the MGO surface as well as from the electrostatic interactions between surface acidic groups of MGO and metal ions. In addition, both the Fe and Mn uptake of MGO was very slightly affected by NaCl, although it decreased with increased humic acid in solutions. In an Fe/Mn binary aqueous system, both metal ions can be efficiently removed at low concentrations, but MGO showed preferential adsorption of Fe in a concentrated aqueous mixture. The adsorption behavior in the binary system was due to different affinities of surface oxygen-containing functional groups on MGO to Fe and Mn. Finally, unlike traditional approaches in recycling and reusing an adsorbent, the Fe- and Mn-loaded MGO can be directly applied as a new adsorbent to achieve the efficient removal of fluoride from aqueous solutions.
Poly(vinyl) Alcohol-Assisted Fabrication of Magnetic Reduced Graphene Oxide Aerogels and Their Adsorption Performance for Cd(II) and Pb(II)

Jiang-Bo Huo,Guoce Yu

DOI: https://doi.org/10.1007/s11270-023-06247-2

2023-01-01

Water Air & Soil Pollution

Abstract:Magnetic graphene-based aerogels have attracted intensive interest due to their unique properties. In this study, a two-step strategy was proposed to fabricate a family of magnetic reduced graphene oxide aerogels (abbreviated as rGO/Fx, x = 1, 2 and 3) as adsorbents for removing heavy metals from water. The hydrogen bonds between poly(vinyl) alcohol (PVA) and rGO maintained the integrity of the rGO/Fx structures evidenced by FT-IR and Raman spectra. The rGO/Fx showed a unique structure with nanoparticles/nanoplates embedded on rGO sheets by SEM observation. The rGO/Fx consisted of PVA, rGO and Fe-based species (Fe 3 O 4 , Fe 0 and FeOOH) identified by PXRD, TGA and XPS analysis. The impressive magnetic property of rGO/Fx can be easily tuned by the mass ratio of Fe/GO. The saturation magnetizations were 0.50, 0.72, and 9.59 emu/g for rGO/F1, rGO/F2 and rGO/F3, respectively. The capacity of rGO/F1 was calculated to be 21.84 and 16.10 mg/g for Cd 2+ and Pb 2+ , respectively. This study may contribute a novel synthesis method of magnetic graphene aerogels by using polymers and metals, and offer an alternative adsorbent for removing heavy metals.
[Intensified Electrosorption of Pb2+ by 2,6-diaminoanthraquinone/Graphene Composite Electrode]

Sheng-Yao Jin,Yang Xiang,Jun-Yu Zhang,Kai Zhang,Qing-Hua Ji

DOI: https://doi.org/10.13227/j.hjkx.201902102

2019-09-08

Abstract:The key to efficient removal of heavy metal ions from water by electrosorption is to develop electrode materials with excellent performance. In this study, 2,6-diaminoanthraquinone (DA)-modified reduced graphene oxide (rGO) was used to prepare a DA@rGO composite electrode using the solvothermal method. The electrochemical properties, electrosorption of Pb2+, adsorption kinetics, and cycle regeneration performance of the composite electrode were investigated. Cyclic voltammetry showed that the composite electrode had excellent electrochemical properties, and the specific capacitance reached 304.4 F·g-1 at a current density of 1 A·g-1. The DA modification significantly increased the pseudocapacitance of the composite electrode. The electrosorption Pb2+ test showed that optimal electrosorption was achieved with -1.2 V of the applied voltage, and the removal rate of the Pb2+ reached 94.8% after 60 min. The electrosorption process is in accord with the first-order kinetic equation. The saturated adsorption capacity of Pb2+ obtained by the Langmuir model was 356.66 mg·g-1, which is significantly higher than that of rGO electrode, at 319.40 mg·g-1. The increase in Pb2+ adsorption amount of the composite electrode can be attributed to the increase in capacitance caused by DA modification. Treatment with 0.5 mol·L-1 nitric acid can desorb the Pb2+ within 5 min to achieve regeneration of the composite electrode. After 10 adsorption-desorption cycles, the adsorption removal rate of Pb2+ by the composite electrode was kept at 88%, indicating robust stability.
Synthesis, Characterization, and Adsorptive Properties of Fe3O4/GO Nanocomposites for Antimony Removal

Xiuzhen Yang,Tengzhi Zhou,Bozhi Ren,Zhou Shi,Andrew Hursthouse

DOI: https://doi.org/10.1155/2017/3012364

2017-01-01

Journal of Analytical Methods in Chemistry

Abstract:A magnetic Fe3O4/GO composite with potential for rapid solid-liquid separation through a magnetic field was synthesized using GO (graphene oxide) and Fe3O4 (ferriferous oxide). Characterization of Fe3O4/GO used scanning electron microscope (SEM), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR), and Vibrating Sample Magnetometer (VSM). A number of factors such as pH and coexisting ions on adsorbent dose were tested in a series of batch experiments. The results showed that GO and Fe3O4 are strongly integrated. For pH values in the range of 3.0~9.0, the removal efficiency of Sb(III) using the synthesized Fe3O4/GO remained high (95%). The adsorption showed good fit to a pseudo-second-order and Langmiur model, with the maximum adsorption capacity of 9.59 mg/g maintained across pH 3.0–9.0. Thermodynamic parameters revealed that the adsorption process was spontaneous and endothermic. Analysis by X-ray photoelectron spectroscopy (XPS) showed that the adsorption process is accompanied by a redox reaction.
Utilization of peanut hull hydrochar /beta cyclodextrin/Fe3O4 magnetic composite for lead ion removal from water solution

Junren Zhu

DOI: https://doi.org/10.1016/j.envres.2024.119525

2024-10-15

Abstract:This study involves synthesizing peanut hull hydrochar (PHH) and a PHH/β-CD/Fe3O4 magnetic composite through hydrothermal and chemical precipitation methods, respectively, to use as effective adsorbents for Pb2+ removal. Vibrating-sample magnetometry (VSM) and Brunauer-Emmett-Teller (BET) analyses revealed that the magnetic saturation value and specific active surface area of PHH/β-CD/Fe3O4 are 31.543 emu/g and 32.123 m2/g, respectively. The impact of key variables on adsorption efficiency was evaluated using the response surface method - central composite design. ANOVA results (F-value: 166.22 and p-value: <0.05) demonstrated that the model effectively assesses the interaction of variables in the adsorption process. Additionally, R2, Adjusted R2, and Predicted R2 values were 0.999, 0.986, and 0.975, respectively, indicating the model's high adequacy in describing response changes. The maximum efficiency for Pb2+ adsorption was found to be 95.35% using PHH and 99.73% with the PHH/β-CD/Fe3O4 magnetic composite. These measurements were taken at a temperature of 25 °C, an adsorbent dose of 1 g/L, a pH of 6, and a Pb2+ concentration of 5 mg/L, with respective contact times of 130 min and 50 min. Thermodynamic analysis revealed negative enthalpy and Gibbs free energy values, indicating that the adsorption process is exothermic and spontaneous. The negative entropy parameter suggests a reduction in random interactions during the process. The Pb2+ adsorption data for both PHH (R2: 0.982) and PHH/β-CD/Fe3O4 (R2: 0.985) were best described by the Pseudo 2nd order kinetic model. Equilibrium data followed the Freundlich model, with R2 values of 0.981 for PHH and 0.990 for PHH/β-CD/Fe3O4, highlighting the importance of heterogeneous surfaces in the removal process. The maximum adsorption capacities for Pb2+ were 26.72 mg/g for PHH and 33.88 mg/g for PHH/β-CD/Fe3O4. Reuse and stability tests confirmed the structural stability and reusability of the adsorbents. Therefore, the PHH/β-CD/Fe3O4 magnetic composite is a promising option for removing Pb2+ from aqueous solutions.
Superior Heavy Metal Ion Adsorption Capacity in Aqueous Solution by High-Density Thiol-Functionalized Reduced Graphene Oxides

Ho-Geun Kim,Jong-Seong Bae,Injoo Hwang,Sung-Hoon Kim,Ki-Wan Jeon

DOI: https://doi.org/10.3390/molecules28103998

IF: 4.6

2023-05-11

Molecules

Abstract:The preparation of mercapto-reduced graphene oxides (m-RGOs) via a solvothermal reaction using P4S10 as a thionating agent has demonstrated their potential as an absorbent for scavenging heavy metal ions, particularly Pb2+, from aqueous solutions due to the presence of thiol (–SH) functional groups on their surface. The structural and elemental analysis of m-RGOs was conducted using a range of techniques, including X-ray diffraction (XRD), Raman spectroscopy, optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy equipped with energy-dispersive spectroscopy (STEM-EDS), and X-ray photoelectron spectroscopy (XPS). At pH 7 and 25 °C, the maximum adsorption capacity of Pb2+ ions on the surface of m-RGOs was determined to be approximately 858 mg/g. The heavy metal–S binding energies were used to determine the percent removal of the tested heavy metal ions, with Pb2+ exhibiting the highest percentage removal, followed by Hg2+ and Cd2+ ions having the lowest percent removal, and the binding energies observed were Pb–S at 346 kJ/mol, Hg–S at 217 kJ/mol, and Cd–S at 208 kJ/mol. The time-dependent removal study of Pb2+ ions also yielded promising results, with almost 98% of Pb2+ ions being removed within 30 min at pH 7 and 25 °C using a 1 ppm Pb2+ solution as the test solution. The findings of this study clearly demonstrate the potential and efficiency of thiol-functionalized carbonaceous material for the removal of environmentally harmful Pb2+ from groundwater.

chemistry, multidisciplinary,biochemistry & molecular biology

Efficient Removal of Pb(Ii) from Water Using Magnetic Fe3s4/Reduced Graphene Oxide Composites

Facile self-assembly synthesis of titanate/Fe3O4 nanocomposites for the efficient removal of Pb2+ from aqueous systems

Judicious fabrication of bifunctionalized graphene oxide/MnFe2O4 magnetic nanohybrids for enhanced removal of Pb(II) from water

Synthesis and Characterization of Reduced Graphene Oxide-Supported Nanoscale Zero-Valent Iron (nzvi/rgo) Composites Used for Pb(II) Removal

Simultaneous removal of Sb(III) and Sb(V) from mining wastewater by reduced graphene oxide/bimetallic nanoparticles

Removal performance and mechanism of Fe3O4/graphene oxide as an efficient and recyclable adsorbent toward aqueous Hg(II)

Multifunctional Nanocomposite Fe3O4@SiO2–mPD/SP for Selective Removal of Pb(ii) and Cr(vi) from Aqueous Solutions

Intensified Electrosorption of Pb2+ by 2, 6-diaminoanthraquinone/Graphene Composite Electrode

Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: Adsorption behavior and process study

Facile Self-Assembly Synthesis of Titanate/fe3o4nanocomposites for the Efficient Removal of Pb2+from Aqueous Systems

Facile fabrication of sodium carboxymethyl cellulose/reduced graphene oxide composite hydrogel and its application for Pb(II) removal

A Facile Synthesis of RGO-Ag2MoO4 Nanocomposites for Efficient Lead Removal from Aqueous Solution

Achieving High-Efficiency and Ultrafast Removal of Pb(ii) by One-Pot Incorporation of a N-doped Carbon Hydrogel into FeMg Layered Double Hydroxides

In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

Hierarchical 13X zeolite/reduced graphene oxide porous material for trace Pb (II) capturing from drinking water

Rapid Removal and Separation of Iron(ii) and Manganese(ii) from Micropolluted Water Using Magnetic Graphene Oxide.

Poly(vinyl) Alcohol-Assisted Fabrication of Magnetic Reduced Graphene Oxide Aerogels and Their Adsorption Performance for Cd(II) and Pb(II)

[Intensified Electrosorption of Pb2+ by 2,6-diaminoanthraquinone/Graphene Composite Electrode]

Synthesis, Characterization, and Adsorptive Properties of Fe3O4/GO Nanocomposites for Antimony Removal

Utilization of peanut hull hydrochar /beta cyclodextrin/Fe3O4 magnetic composite for lead ion removal from water solution

Superior Heavy Metal Ion Adsorption Capacity in Aqueous Solution by High-Density Thiol-Functionalized Reduced Graphene Oxides