Abstract:We designed and manufactured an optical bistability waveguide device based on nonlinear one-dimensional photonic crystal used CdS_xSe_(1-x) doped glass. This kind of semiconductor doped glass has large nonlinear refractive index and nonlinear fast response time. The distribution of refractive index of the nonlinear one-dimensional photonic crystal waveguide satisfies sine function. We obtained the nonlinear photonic crystal waveguide by exposure holography and etching techniques. Length of the photonic crystal waveguide is about 3 mm. The height of the peak-groove of the waveguide is 0.1 μm. According to our design, the center of bandgap of the one-dimensional photonic crystal lies at 514.5 nm while the power density of the incident light, the incident light was reflected by the photonic crystal. When the power density of the incident light increasing, the bandgap is shifting to the direc-tion of short wavelength due to the decreasing of the refractive index with the increasing of the incident power density, so more incident light is transmitted. In experiment, we used an active mode-locking pulse of Ar ion laser as the light source which wavelength is 514.5 nm, repeating frequency is 82 MHz and pulse width is 200 ps. The light beam was coupled into the device by prism with a laser average power of 1.28 W (in the case of nonlinear saturation operation, optimum coupling efficiency is about 6%). Pulse wave forms of incident light and transmitted from sample were recorded in turn by 7 904 oscilloscope. The optical bistability curve of input power density and output one is fitted by computer. We obtained the threshold power density of bistable switch to be 1.60×10~5 W/cm~2 (it is equivalent to average power of 77 mW) and both the rise and fall time are 63 ps. We used the Finite Difference Time Domain Method to obtain the characteristics of the bandgap shift with the incident power density increasing of the nonlinear photonic crystal and calculate the optical bistability curve of this device. In theory, the threshold power density of bistable switch is about 1.40×10~5 W/cm~2 and the switch time is about 50 ps. The theoretical results agree well with the experimental ones. This device is a new and feasible one for optical information process and optical computing in the future.

Study of optical bistability and multistability with optical waveguide modulator

Picosecond optical bistability in metallophthalocyanine-doped polymer film waveguides.

Optical Bistability in Semiconductor Periodic Structures

Observation of Optical Bistabilities in A Doped Polymer Thin-Film Quasi-Wave-Guide

Optical Bistable Device Based on One-Dimensional Photonic Crystal Waveguide

Theory of Optical Bistability in A Non-Linear Quasi-Waveguide

Optical bistability in periodically poled LiNbO3 induced by cascaded second-order non-linearity and the electro-optic effect

Polymer-based Waveguide Electro-optical Modulator

Low Power and Large Modulation Depth Optical Bistability in an Si Photonic Crystal L3 Cavity

Characteristics of Optical Bistability of Nonlinear One-dimensional Photonic Crystal Waveguide

Optical Bistability in a Silicon Nitride Microring Integrated with 2D PtSe2 [Invited]

Ultrafast optical bistable behaviors of vanadyl phthalocyanine-doped polymer film quasi-waveguide and waveguide

Sideband control of optical bistability and multistability

Optical Bistability in Subwavelength Metallic Grating Coated by Nonlinear Material.

Optical Intensity Modulation in an LiNbO3 Slab-Coupled Waveguide

High-contrast Optical Bistability Using a Subwavelength Epsilon-Near-zero Material.

Bistability by Slow Light Photonic Crystal Waveguide

Optical Instability in Optoelectronic Bistable Circuits

Analysis of the effect of nonlinearity on MgO:LiNbO3 high power waveguide modulator

Transfer-Matrix Analysis Of Wave-Guide Phase Modulator Using The Linear Electrooptic Effect Of Asymmetric Quantum-Wells

Engineering Optical and Mirror Bi-stability Mechanically