Abstract:A series of mesoporous molecular sieve samples have been synthesized hydrothermally by using cetyltrimethylammonium bromide (CTAB) as a template, tetraethyl orthosilicate (TEOS) as a silica source, tetramethyl ammonium hydroxide as a base source and water as a solvent. The samples were prepared by adding required amount of surfactant, TEOS, water and TMAOH to maintain pH, then the obtained mixture was stirred for 10 min. and then transferred into autoclave. pH of the gel was adjusted to 10. The molar ratio of surfactant (CTAB) and TEOS was kept at 0.11:0.48, 0.165:0.48, 0.22:0.48 and 0.274:0.48 for samples A-I, A-II, A-III and A-IV respectively, while the aging time was kept 4 days and temperature remained constant at 393 K. The as-synthesized samples were thoroughly washed with distilled water and then dried at 373 K for 24 h. The as-synthesized samples were calcined at 723 K for 6 h in air. The as synthesized samples were characterized for its morphology using Field Emission Scanning Electron Microscopy (FESEM), elemental analysis by using Energy Dispersive X-Ray (EDX), thermal stability by using Thermogravimetric Analysis (TGA), the functional groups within the samples before and after calcination was analyzed using Fourier Transform Infrared Spectroscopy (FTIR). Formation of the mesoporous material depends on the surfactant, which act as a structure directing agent. Micelles of the surfactant arrange themselves and interact with the silicate ions to form the mesoporous material. In this study, the effect of concentration was studied on the synthesis and found that due to increase in concentration of surfactant, more silica polymerized and formation of material increases.

Non-Hydrothermal Synthesis of Cylindrical Mesoporous Materials: Influence of the Surfactant/Silica Molar Ratio

The Synthesis Of Mesoporous Molecular Sieves

Effect of Surfactant Concentration on the Morphology and Texture of MCM-41 Materials

Synthesis of Si-based mesoporous materials with different structural regularity

Highly efficient synthesis of ordered mesoporous silica materials with controllable microporosity using surfactant mixtures as templates

Electron Microscopy and Nitrogen Adsorption Studies of Film-Type Carbon Replicas with Large Pore Volume Synthesized by Using Colloidal Silica and Sba-15 As Templates

Effects of Ammonia/silica Molar Ratio on the Synthesis and Structure of Bimodal Mesopore Silica Xerogel

Synthesis of Mesoporous MCM-48 Molecular Sieves with Cationic and Anionic Mixed Surfactant System as Template

Tailoring pore structures and morphologies of highly ordered cubic mesoporous silica prepared in mild conditions: the effects of reaction parameters

Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials

Synthesis of Bimodal Nanostructured Silicas with Independently Controlled Small and Large Mesopore Sizes

Mixed Surfactant Templating Route for Mesoporous Silica

Toward a facile synthesis of spherical sub-micron mesoporous silica: Effect of surfactant concentration

Synthesis of Ordered Mesoporous Aluminosilicate under a Low Surfactant/Silica Molar Ratio Condition

Nonionic Block Copolymer and Anionic Mixed Surfactants Directed Synthesis of Highly Ordered Mesoporous Silica with Bicontinuous Cubic Structure

Controlled Synthesis of Mesoporous Silicas Mcm-48 and Mcm-41 by Using Mixed Templates

Synthesis of ordered small pore mesoporous silicates with tailorable pore structures and sizes by polyoxyethylene alkyl amine surfactant

Hydrothermal synthesis and pore characterization of AlMCM-41

The Synthesis of Porous Materials with Macroscopically Oriented Mesopores Interconnected by Branched Mesopores

Study on synthesis factors of silica-based mesoporous molecular sieve MCM-41: II. Influences of surfactants

Effect of Surfactant Concentration on the Physico-chemical Characteristics of Mesoporous Molecular Sieve