Abstract:Additive manufacturing, with its fast development and application of polymeric materials, led to the wide utilization of polylactic acid (PLA) materials. As a biodegradable and biocompatible aliphatic polyester, produced from renewable sources, PLA is widely used in different sectors, from industry to medicine and science. The aim of this research is to determine the differences between two forms of the PLA material, i.e., fused deposition modeling (FDM) printed filament and digital light processing (DLP) printed resin, followed by aging due to environmental and hygiene maintenance conditions for a period of two months. Specimens underwent 3D scanning, tensile testing, and Fourier transform infrared (FTIR) spectrometry to obtain insights into the material changes that occurred. Two-way Analysis of Variance (ANOVA) statistical analysis was subsequently carried out to determine the statistical significance of the determined changes. Significant impairment can be observed in the dimensional accuracies between both materials, whether they are non-aged or aged. The mechanical properties fluctuated for aged FDM specimens: 15% for ultimate tensile stress, 15% for elongation at yield, and 12% for elastic modulus. Regarding the DLP aged specimens, the UTS decreased by 61%, elongation at yield by around 61%, and elastic modulus by 62%. According to the FTIR spectral analysis, the PLA materials degraded, especially in the case of resin specimens. Aging also showed a significant influence on the elastic modulus, ultimate tensile stress, elongation at yield, elongation at break, and toughness of both materials, which was statistically shown by means of a two-way ANOVA test. The data collected in this research give a better understanding of the underlying aging mechanism of PLA materials.

Evaluation of the Activation Energy for Pyrolytic Degradation of Poly‐L‐Lactide (PLA) During Artificially Accelerated Aging

Enthalpy Relaxation And Embrittlement Of Poly(L-Lactide) During Physical Aging

Roles Of Physical Aging On Crystallization Kinetics And Induction Period Of Poly(L-Lactide)

Influence of ethylene oxide and gamma irradiation sterilization processes on the degradation behaviour of poly(lactic acid) (PLA) in the course of artificially accelerated aging

In‐situ experimental study on the hydrolysis and pyrolysis processes of polylactic acid

Pyrolysis, kinetics and thermodynamic analyses of rice husks/clay fiber-reinforced polylactic acid composites using thermogravimetric analysis

Thermal Degradation Kinetics of G-Ha/pla Composite

Correlation between the activation energy of PLA respectively PLA/starch composites and mechanical properties with regard to differ accelerated aging conditions

Long-Term Thermal Stabilization of Poly(Lactic Acid)

Pyrolysis Kinetic Analysis of Molten Bioplastics Based on the Combination of Real-Time Characterization and Guassian Deconvolution: Case Study of Poly(lactic Acid) Materials

Kinetics of catalyzed thermal degradation of polylactide and its application as sacrificial templates

Hydro-Thermal Degradation: A New and Rapid Method for Evaluating the Bio-degradation Performance of Poly(lactic acid)

Physical Aging and Glass Transition Dynamics of Semicrystalline Poly(lactic acid) for 3D-Printing Applications Investigated by Fast Scanning Calorimetry

Study on the atomic scale of thermal and thermo-oxidative degradation of polylactic acid via reactive molecular dynamics simulation

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Isothermal crystallization process and thermal analysis of polylactic acid/cotton fiber composites during thermal degradation

Correlation between Processing Parameters and Degradation of Different Polylactide Grades during Twin-Screw Extrusion

Effect of Aging on Tensile and Chemical Properties of Polylactic Acid and Polylactic Acid-Like Polymer Materials for Additive Manufacturing

Degradation kinetics and volatile identification in poly(lactic acid), aloe vera, and polyester polyol biocomposites

The aging behavior of degradable plastic polylactic acid under the interaction of environmental factors

Co-pyrolysis of poly (lactic acid) and sugar cane bagasse: Kinetic and thermodynamic studies