Abstract:This paper has explored an ultra-low-power design of two 60-GHz direct-conversion receivers in a 65-nm CMOS process for single-channel and multi-channel applications under the IEEE 802.15.3c standard, respectively. One subthreshold biasing 0.4-V transconductance mixer is designed with a compact quadrature hybrid coupler (160 μm × 210 μm with measured 3-dB intrinsic loss) in receivers to achieve low power (8 mW for single channel and 12.4 mW for multi-channel) and high gain (55 dB for single channel and 62-dB for multi-channel). One three-stage low-noise amplifier employs high- Q passive matchings. A double-layer-stacked inductor is utilized for matching in the single-channel receiver and a high-impedance transmission line is utilized for matching in the multi-channel receiver, respectively. In addition, one new modified Cherry-Hooper amplifier is applied for the variable-gain amplifier design to achieve high gain-bandwidth product and high power efficiency. The single-channel receiver is implemented with 0.34- mm2 chip area. It is measured with a power consumption of 8 mW, a minimum single-sideband noise figure (NF) of 4.9 dB, a 3-dB bandwidth of 3.5 GHz, and a maximum conversion gain of 55 dB. The multi-channel receiver is implemented with 0.56- mm2 chip area. It is measured with a power consumption of 12.4 mW, a 3-dB bandwidth of 8 GHz (59.5 ~ 67.5 GHz), and a maximum conversion gain of 62 dB. The measurement results show that the two demonstrated 60-GHz direct-conversion receivers can achieve high gain and low NF with ultra-low power in 65-nm CMOS.

Stacked Multi-Channel Receiver Architecture for Power-Efficient High-Speed Optical Links

A Stacked 4×25 Gb/s Optical Receiver in 28 Nm CMOS with 0.154 Mw/gb/s Power Efficiency

A Low-Noise Stacked Differential Optical Receiver in 0.18-μm CMOS

A Low-Noise Stacked Differential Optical Receiver in 0.18-m CMOS

A Robust Differential 4x28gb/s Stacked Optical Receiver in 28nm CMOS Realizing Crosstalk Suppression and Power Supply Rejection

Multi-Stacked High-Speed PIN-PD for Compact Mobile Optical-Wireless Transceiver

An Area-Efficient and Programmable 4 x 25-to-28.9 Gb/s Optical Receiver with DCOC in 0.13 m SiGe BiCMOS

A Power Efficient 1.0625-3.125 Gb/s Serial Transceiver in 130 Nm Digital CMOS for Multi-Standard Applications.

Low-Power Inductor-Less Optical Receiver for 50G PON in 28nm CMOS.

An Area-Efficient and Programmable 4 × 25-to-28.9 Gb/s Optical Receiver with DCOC in 0.13 µm SiGe BiCMOS

A 200Gb/s Low Power DSP-Based Optical Receiver and Transmitter with Integrated TIA and Laser Drivers.

Advanced Optical Receiver Architectures for Ultra-High Capacity but Low-Cost Short-Reach Optical Interconnects

Binarized Coherent Optical Receiver Based on Opto-Electronic Neural Network

A Fully-Integrated 25gb/s Low-Noise TIA+CDR Optical Receiver Designed in 40Nm-Cmos.

A Scalable Adaptive ADC/DSP-Based 1.25-to-56Gbps/112Gbps High-Speed Transceiver Architecture Using Decision-Directed MMSE CDR in 16nm and 7nm

Highly Reliable Transmission System for Next-Generation Optical Access Network Based on Silicon Modulator with Maximum-Ratio Combined Receiver

Design of Ultra-Low-Power 60-Ghz Direct-Conversion Receivers in 65-Nm CMOS

An 11.05 Mw/Gbps Quad-Channel 1.25-10.3125 Gbps Serial Transceiver With A 2-Tap Adaptive Dfe And A 3-Tap Transmit Ffe In 40 Nm Cmos

Power Budget of 25-Gb/s Digital Orthogonal Filter Multiple Access PONs with 10G-Class Optics

An Energy-Efficient Stacked Wdm-Ofdm-Pon System with Adaptive Rate Modulation

A 12.5 Gb/s 1.38 mW all-inverter-based optical receiver with multi-stage feedback TIA and continuous-time linear equalizer