Abstract:This article characterized the mechanical performance and failure mode of single‐lap joints of carbon fiber reinforced boron‐modified phenolic resin plastic (CF/BPR) and TC4 titanium alloy by quasi‐static tensile tests at four temperatures (25, 100, 175, and 250°C). And the validated finite element model was used to analyze the damage propagation of SLJs. This article characterized the mechanical performance and failure mode of single‐lap joints (SLJs) of carbon fiber reinforced boron‐modified phenolic resin plastic (CF/BPR) and TC4 titanium alloy by quasi‐static tensile tests at four temperatures (25, 100, 175, and 250°C). The experimental results indicated that the shear strength of SLJs is 10.8 MPa at 25°C, which experiences monotonic drop to 80%, 42.6%, and 18.5% with temperature increase from 100 to 175°C, and to 250°C, respectively. Additionally, there was a transformation in the failure mode from composite material failure to cohesive failure in the adhesive along with the temperature increase. The intralaminar elasticities of CF/BPR were predicted using representative volume element (RVE), and the mechanical properties of three types of bondlines (i.e., the interlamination, interface of CF/BPR and the epoxy adhesive layer) were determined by both experiment and predictive methods. A finite element model taking into account the intralaminar damage of CF/BPR and the cohesive behavior of three bondlines was established. The simulated results showed good consistency with the experimental data for failure prediction, and the mechanical performance and damage propagation of SLJs at different temperatures were discussed. This research provides reference for the design and manufacture of high‐temperature bonded structures. Highlights RVE and degradation factor methods evaluate the elasticity of composite material. Four types of damage behaviors are considered in the established FE model. The SLJs exhibit single or multiple failure modes at different temperatures. The mechanical properties of SLJs severely degraded with increasing temperature.

Bearing Failure Analysis of Carbon Fiber Reinforced Composite to Metal Bolted Joint at Elevated Temperature

Experimental investigation of temperature effects on the tensile behavior of composite‐aluminum four‐nail bolted joints

Experimental and Finite Element Research on the Failure Mechanism of C/C Composite Joint Structures under Out-of-Plane Loading

A Systematic Study on the Failure Behaviors of Aluminum Alloy/composite Bonded Joints Exposed to Various Typical Aging Environments for Automobiles

Test and simulation of high temperature resistant polyamide composite with single lap single bolt connection

Comparison on failure behavior of three-dimensional woven carbon/carbon composites joints subjected to out-of-plane loading at room and high temperature

Experimental and numerical analysis of the mechanical behavior of composite-to-titanium bolted joints with liquid shim

Analysis of Tensile Failure Behavior of Metal Fiber Laminates Under Different Temperature Environments

Thermal Mismatch Effect and High-Temperature Tensile Performance Simulation of Hybrid CMC and Superalloy Bolted Joint by Progressive Damage Analysis

Study on Bearing Strength and Failure Modes of Single Bolted Joint Carbon/Epoxy Composite Materials

Compression Shear Properties of Adhesively Bonded Single-Lap Joints of C/C Composite Materials at High Temperatures

Dynamic properties of single and multi-bolted composite joints at different bolt-loads and elevated temperature

Parametric Influences of Geometric Dimensions on High Temperature Mechanical Behaviors and Damage Mechanisms of Ceramic Matrix Composite and Superalloy Double Bolted Joints

Tensile Failure Analysis of Carbon Fiber Composite Material L-shaped Joint

Study on mechanical properties of bolted connection structure of carbon fiber resin matrix composites at low temperature

Mechanical performance of adhesively bonded carbon fiber reinforced boron‐modified phenolic resin plastic‐titanium single‐lap joints at high temperature

Defect-based fatigue crack nucleation and strength evaluation of additively manufactured TiC/Ti6Al4V titanium matrix composite at different temperatures

Compressive experimental method and properties of C/C composites under ultra-high temperature environment

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

Finite Element Analysis of Bearing Performance of Concrete-filled Steel Tube Composite Frame under Thermal and Mechanical Coupling

Tensile tests and strength estimation for double-lap single-bolt j oints in T800 carbon fiber reinforced composites