Abstract:The acid remaining in the nitrocellulose (NC) during the production process have some influence on its structure and stability. Herein, physicochemical properties, thermal behavior, and decomposition kinetics of NC before and after sulfuric acid treatment were thoroughly investigated using a series of analytical instruments in this paper. It is found that the nitrogen content and relative molecular weight of NC-0.968% that undergoing impregnation with sulfuric acid and drying is decreased by 0.58% and 16% (decreasing rate), respectively, suggesting that the presence of excess sulfuric acid leads to denitrification of NC at room temperature as well as breakage of the glucoside bond, with a greater effect on the latter. Moreover, the results of X-ray diffraction (XRD), scanning electron microscopy (SEM), and dynamic vapor sorption (DVS) indicate that the presence of sulfuric acid did not cause significant changes in the crystalline structure of NC, but severely damage the microscopic morphology, resulting in a large number of micropores appearing on its fiber surface, which enhances the hygroscopicity of NC. In addition, the combined Model-based kinetic results indicate that the decomposition reaction process of NC- 0.968% has a step one more than that of pure NC, which is attributed to the acid-catalyzed denitrification of NC and the breaking of glucoside bonds. Combined with the experimental results of TG-DSC-FITR, it shows that the presence of acid mainly affects the initial decomposition process of NC, while the fracture of the glucose ring frame and oxygen bridge in the NC molecular structure is more dependent on the action of NO 2 and the decomposition temperature.

Reaction Yield Model of Nitrocellulose Alkaline Hydrolysis

Effect of inorganic salt on the thermal degradation of nitrocellulose and reaction mechanism of its mixture

Heuristic-Based Alkaline Hydrolysis Mechanism of Nitrate Ester (nitrocellulose Monomer) and Nitroamine (hexogen) Compounds: Electrostatic Attraction Effect of the Nitro Group.

Development of thermal explosion model on industrial-scale nitrocellulose under adiabatic and non-adiabatic condition

Effect of sulfuric residual acid on the physicochemical properties, thermal behavior, and decomposition kinetics of nitrocellulose

Thermal stability assessment of nitrocellulose by using multiple calorimetric techniques and advanced thermokinetics

Theoretical and experimental study on the effect of nitrogen content on the thermal characteristics of nitrocellulose under low heating rates

A strategic approach to thermal stability enhancement of nitrocellulose

Thermal hazard evaluation on spontaneous combustion characteristics of nitrocellulose solution under different atmospheric conditions

Degradation of nitrocellulose film under aerobic conditions by a newly isolated Rhodococcus pyridinivorans strain

Chaetomium elatum treatment of nitrocellulose: investigation on structural and thermal properties

Study on Kinetics of Isocyanate Reaction for Waterbased Nitrocellulose

Response surface methodology for optimization of nitrocellulose preparation from nata de coco bacterial cellulose for propellant formulation

Experimental Study on the Effect of Storage Conditions on Thermal Stability of Nitrocellulose

Experimental insight into interaction mechanism of 1H-Tetrazloe and nitrocellulose by kinetics methods and TG-DSC-FTIR analysis

Thermokinetic model-based experimental and numerical investigation of the thermal hazards of nitrification waste

Comparative Analysis of Stable Decomposition and Combustion Kinetics of Nitrated Cellulose

Improvement of lactic acid production from cellulose with the addition of Zn/Ni/C under alkaline hydrothermal conditions

A kinetic model for cathodic degradation of explosives in a flow-through electrochemical reactor

Fabrication of Nitrocellulose‐based Nanoenergetic Composites, Study on Its Structure, Thermal Decomposition Kinetics, Mechanism, and Sensitivity

Mechanism of AZDEGDN accelerating the decomposition of nitrocellulose: insights from reactive molecular simulations