Abstract:The acid remaining in the nitrocellulose (NC) during the production process have some influence on its structure and stability. Herein, physicochemical properties, thermal behavior, and decomposition kinetics of NC before and after sulfuric acid treatment were thoroughly investigated using a series of analytical instruments in this paper. It is found that the nitrogen content and relative molecular weight of NC-0.968% that undergoing impregnation with sulfuric acid and drying is decreased by 0.58% and 16% (decreasing rate), respectively, suggesting that the presence of excess sulfuric acid leads to denitrification of NC at room temperature as well as breakage of the glucoside bond, with a greater effect on the latter. Moreover, the results of X-ray diffraction (XRD), scanning electron microscopy (SEM), and dynamic vapor sorption (DVS) indicate that the presence of sulfuric acid did not cause significant changes in the crystalline structure of NC, but severely damage the microscopic morphology, resulting in a large number of micropores appearing on its fiber surface, which enhances the hygroscopicity of NC. In addition, the combined Model-based kinetic results indicate that the decomposition reaction process of NC- 0.968% has a step one more than that of pure NC, which is attributed to the acid-catalyzed denitrification of NC and the breaking of glucoside bonds. Combined with the experimental results of TG-DSC-FITR, it shows that the presence of acid mainly affects the initial decomposition process of NC, while the fracture of the glucose ring frame and oxygen bridge in the NC molecular structure is more dependent on the action of NO 2 and the decomposition temperature.

Response surface methodology for optimization of nitrocellulose preparation from nata de coco bacterial cellulose for propellant formulation

A novel method for the preparation of spherical cellulose-tungsten carbide composite matrix with NMMO as nonderivatizing solvent

Selecting appropriate cellulose morphology to enhance the nitrogen content of nitrocellulose

Analysis and Characterization of Nitrocellulose As Binder Optimized by 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide

Chemical modification of nitrocellulose by grafting sodium carboxymethyl

Development and characterization of innovative energetic composites based on nitrotriazolone and nanostructured cellulose nitrates

Unveiling the impact of nitrocellulose-enveloped nCuO on the thermal characteristics of ammonium nitrate-based solid composite propellants utilizing polyurethane/nitrocellulose blend binders

Acid hydrolysis roles in transformation of cellulose-I into cellulose-II for enhancing nitrocellulose performance as an energetic polymer

Preparation of nitrocellulose/nitrochitosan composite aerogel with mesoporous and significant thermal behavior on the basis of precursors synthesized by homogeneous reaction

Regulating the Thermal Behavior of Nitrocellulose by Stable Incorporation of a Green Supramolecular Salt

Study on the Preparation and Properties of Self-Emulsified Nitrocellulose Emulsion for Coatings

Effect of sulfuric residual acid on the physicochemical properties, thermal behavior, and decomposition kinetics of nitrocellulose

Study on Kinetics of Isocyanate Reaction for Waterbased Nitrocellulose

Preparation and thermal performance of nitrocellulose coated by polydopamine

A strategic approach to thermal stability enhancement of nitrocellulose

Taguchi-assisted multi-response improved simultaneous nanocellulose and sugar production from microcrystalline cellulose derived from raw oil palm leaves

Degradation of nitrocellulose film under aerobic conditions by a newly isolated Rhodococcus pyridinivorans strain

Preparation and Characterization of Self-Emulsified Waterborne Nitrocellulose

Theoretical and experimental study on the effect of nitrogen content on the thermal characteristics of nitrocellulose under low heating rates

Preparation and Characterisation of the NBC/CL-20/AP Nanoenergetic Composite Materials

One-step, safe and efficient preparation strategy of nitrate glycerol ether cellulose-based energetic composites with application potential in propellants