Abstract:The separation of CO2 from N2 remains a highly challenging task in postcombustion CO2 capture processes, primarily due to the relatively low CO2 content (3-15%) compared to that of N2 (70%). This challenge is particularly prominent for carbon-based adsorbents that exhibit relatively low selectivity. In this study, we present a successfully implemented strategy to enhance the selectivity of composite aerogels made of reduced graphene oxide (rGO) and functionalized polymer particles. Considering that the CO2/N2 selectivity of the aerogels is affected on the one hand by the surface chemistry (offering more sites for CO2 capture) and fine-tuned microporosity (offering molecular sieve effect), both of these parameters were affected in situ during the synthesis process. The resulting aerogels exhibit improved CO2 adsorption capacity and a significant reduction in N2 adsorption at a temperature of 25 °C and 1 atm, leading to a more than 10-fold increase in selectivity compared to the reference material. This achievement represents the highest selectivity reported thus far for carbon-based adsorbents. Detailed characterization of the aerogel surfaces has revealed an increase in the quantity of surface oxygen functional groups, as well as an augmentation in the fractions of micropores (<2 nm) and small mesopores (<5 nm) as a result of the modified synthesis methodology. Additionally, it was found that the surface morphology of the aerogels has undergone important changes. The reference materials feature a surface rich in curved wrinkles with an approximate diameter of 100 nm, resulting in a selectivity range of 50-100. In contrast, the novel aerogels exhibit a higher degree of oxidation, rendering them stiffer and less elastic, resembling crumpled paper morphology. This transformation, along with the improved functionalization and augmented microporosity in the altered aerogels, has rendered the aerogels almost completely N2-phobic, with selectivity values ranging from 470 to 621. This finding provides experimental evidence for the theoretically predicted relationship between the elasticity of graphene-based adsorbents and their CO2/N2 selectivity performance. It introduces a new perspective on the issue of N2-phobicity. The outstanding performance achieved, including a CO2 adsorption capacity of nearly 2 mmol/g and the highest selectivity of 620, positions these composites as highly promising materials in the field of carbon capture and sequestration (CCS) postcombustion technology.

Preparation of nitrocellulose/nitrochitosan composite aerogel with mesoporous and significant thermal behavior on the basis of precursors synthesized by homogeneous reaction

Preparation and Characterization of Nanocellulose/Chitosan Aerogel Scaffolds Using Chemical-Free Approach

Multiscale Nanocelluloses Hybrid Aerogels for Thermal Insulation: the Study on Mechanical and Thermal Properties.

Anisotropic cellulose nanofiber/chitosan aerogel with thermal management and oil absorption properties

Thermal safety characteristics of nanoscale nitrocellulose/stabilizer composite materials

Facile Fabrication of a Highly Porous N-Doped Nanotubular Carbon Aerogel by an In Situ Template-Growth Method for High-Performance Supercapacitors

Superior Stable, Hydrophobic and Multifunctional Nanocellulose Hybrid Aerogel Via Rapid UV Induced In-Situ Polymerization

Nanocellulose nanocomposite aerogel towards efficient oil and organic solvent adsorption

Preparation and characterization of cellulose nanofiber/melamine–urea–formaldehyde composite aerogels for thermal insulation applications

Anisotropic composite aerogel with thermal insulation and flame retardancy from cellulose nanofibers, calcium alginate and boric acid

Synthesis of Nanostructured Boron Nitride Aerogels by Rapid Pyrolysis of Melamine Diborate Aerogels via Induction Heating: From Composition Adjustment to Property Studies

Comparative Study of Aerogels Obtained from Differently Prepared Nanocellulose Fibers.

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Density Modifications Toward High Mechanical Performance Nanocellulose Aerogels

One-step, safe and efficient preparation strategy of nitrate glycerol ether cellulose-based energetic composites with application potential in propellants

Carbon Dioxide and Nitrogen-Modulated Shape Transformation of Chitosan-Based Composite Nanogels

Preparation of CS@BAC composite aerogel with excellent flame-retardant performance, good filtration for PM2.5 and strong adsorption for formaldehyde

Ultra-light-weight, anti-flammable and water-proof cellulosic aerogels for thermal insulation applications

Nanocellulose-based composite aerogels toward the environmental protection: Preparation, modification and applications

Research in porous structure of cellulose aerogel made from cellulose nanofibrils

Resembling Graphene/Polymer Aerogel Morphology for Advancing the CO2/N2 Selectivity of the Postcombustion CO2 Capture Process