Abstract:Two-dimensional materials are extremely beneficial for supercapacitors due to their unique morphological richness, larger area, and better conductivity. In addition, layered materials have more space between them, which allows for greater charge storage as well as ion transport and storage. In the present work, a facile approach is used to fabricate bare MoS 2 and MoS 2 -g-C 3 N 4 nanocomposites as an electrode material for high-performance supercapacitor electrodes. The synthesized samples were examined by XRD, HRTEM, FESEM, FTIR, and RAMAN Spectroscopy. From structural investigations, the sample was found to present both g-C 3 N 4 and MoS 2 in the same hexagonal phase. The typical porous morphology consisting of small nanorods and irregular shapes can be observed. The small peak appears at 467 cm −1 which confirms the presence of a Mo–S bond. After the sample characterization of the nanocomposites, the electrochemical performance of the as-prepared MoS 2 -g-C 3 N 4 hybrid was evaluated by cyclic voltammetric study, Galvanostatic charge/ discharge, and electrochemical impedance techniques. During the optimized study in the three-electrode system, this attractive and MoS 2 -g-C 3 N 4 nanocomposite electrode exhibits the highest specific capacitance of 836 F g −1 at a current density of 1 Ag −1 and excellent cyclic stability with 94% of capacitance retention after 5000 repeated charge–discharge cycles. Further, this composite material sample has a very lesser value of R ct compared to other samples. We have assembled a two-electrode device using MoS 2 -g-C 3 N 4 which exhibits a specific capacitance of 198 F g −1 with an energy density of 39.6 Wh kg −1 .

Preparation of a MoS2/carbon Nanotube Composite As an Electrode Material for High-Performance Supercapacitors.

Preparation of a MoS2/carbon nanotube nanocomposite by hydrothermal method for supercapacitor

Use of a diatomite template to prepare a MoS2/amorphous carbon composite and exploration of its electrochemical properties as a supercapacitor

One-Step Hydrothermal Synthesis of MoO2/MoS2 Nanocomposites as High-Performance Electrode Material for Supercapacitors.

Synthesis, formation mechanism and supercapacitor performance of MoS2/Mo2C/C nanofibers

Construction and electrochemical properties of carbon nanotube composite Mn-MOFs materials electrode for high-performance flexible supercapacitors

Porous Hybrid Composites of Few-Layer MoS2 Nanosheets Embedded in a Carbon Matrix with an Excellent Supercapacitor Electrode Performance.

Electrochemical Properties of Mo0.7Co0.3S2/g-C3N4 Nanocomposites Prepared by Solvothermal Method

Dopamine Adsorption Precursor Enables N-doped Carbon Sheathing of MoS2 Nanoflowers for All-around Enhancement of Supercapacitor Performance

Enhancement of energy storage performance of supercapacitors based on MoS2-g-C3N4 Nanocomposite electrodes

Coni2s4-Graphene-2d-Mose2 As an Advanced Electrode Material for Supercapacitors

Design of MoS2/NC/MnO2 hollow microsphere electrode for high performance supercapacitors

Synthesis and Electrochemical Performance of MnO2/CNTs–embedded Carbon Nanofibers Nanocomposites for Supercapacitors

Preparation of MoFs-Derived Cobalt Oxide/Carbon Nanotubes Composites for High-Performance Asymmetric Supercapacitor

Enhanced pseudocapacitive performance of MoS2 by introduction of both N-GQDs and HCNT for flexible supercapacitors

Facile Synthesis of NiCo2S4/CNTs Nanocomposites for High-Performance Supercapacitors.

Hydrothermal synthesis of MWCNT/Ni-Mn-S composite derived from bimetallic MOF for high-performance electrochemical energy storage

Synthesis of MoS 2 /CoS composite electrode and its application for supercapacitors

MOF-Derived Nickel–Cobalt Sulfide Nanoflakes Wrapped Carbon Nanotubes for Hybrid Supercapacitors

MoS2/CoS2 Composites Composed of CoS2 Octahedrons and MoS2 Nano-Flowers for Supercapacitor Electrode Materials

MOF-Derived NiS 2 @Carbon Microspheres Wrapped with Carbon Nanotubes for High Cycle Performance Supercapacitors