Abstract:A combination of phase change materials (PCMs) with highly conductive substances could be a promising technique to deal effectively with the relatively low thermal conductivity of PCMs. It can promote the development and commercialization of PCMs in the field of thermal management and energy storage. In this numerical study, firstly, the characterization of the PCM solidification process incorporating different metal oxide nanoparticles, namely Al2O3, ZnO, CuO, and SiO2, with volume fractions of 0–4% along with their thermophysical properties inside a triplex-tube are examined. Moreover, a comparative study at different heat transfer fluid temperatures and tubes diameters between three common thermal energy storage units, including triplex-tube, shell-and-tube with inner and outer cooling, are carried out for an identical volume of the storage unit to identify, which type of the units provides higher performance. The results show that among the considered nanoparticle-PCMs, the Al2O3-PCM reflects a higher solidification rate at a volume fraction of 2%, while at a volume fraction of 4%, the CuO-PCM possesses a lower solidification time. Moreover, the triplex-tube reflects better solidification time at any heat transfer fluid temperature and tubes diameter compared to other considered units. Finally, the Taguchi method is employed to determine the optimum solidification time. According to the Taguchi analysis, dispersing nanoparticles in PCM is the less effective parameter, and the minimum solidification time can be achieved by employing CuO-PCM 4% in a triplex-tube with the low temperature of heat transfer fluid and larger tubes diameter.

Time Dependent Conduction Heat Transfer During Solidification in a Storage System Using Nanoparticles

Solidification Behavior of Hybrid Tio2 Nanofluids Containing Nanotubes and Nanoplatelets for Cold Thermal Energy Storage

Simulations of transient heat transfer within cold-storage unit during solidification incorporating nanomaterial

Heat Transfer During Constrained Melting Of Graphite-Based Nanofluids In A Spherical Capsule

Thermal assessment of storage unit during solidification in existence of different configuration of nano-powders

Efficacy of dispersing nano-powders on rate of cold storage during solidification considering transient conduction

Analyzing cold storage unit during discharging process involving pure conduction utilizing nanomaterial

Heat transfer treatment of system during freezing with implement of nanoparticles

Incorporating numerical method for analyzing the conduction heat transfer during solidification loading nanoparticles

Numerical simulation of solidification through wavy storage container in existence of nanoparticles

The increment of performance of cold storage via simulating unsteady solidification utilizing nanomaterial

Evaluation of thermal storage system during freezing and loading nano-powders

Thermal energy storage system based on nanoparticle distribution optimisation for enhanced heat transfer

Heat transfer simulation of heat storage unit with nanoparticles and fins through a heat exchanger

Nanofluids for Thermal Transport

Optimization and performance investigation of the solidification behavior of nano-enhanced phase change materials in triplex-tube and shell-and-tube energy storage units

Heat transfer during discharging of NEPCM through the finned container

Influence of nanoparticle loading on rate of cold storage considering transient conduction

Enhancement of PCM Solidification Using Inorganic Nanoparticles and an External Magnetic Field with Application in Energy Storage Systems

Thermal Properties of the Mixed n-Octadecane/Cu Nanoparticle Nanofluids during Phase Transition: A Molecular Dynamics Study

Improvement of water solidification via nanotechnology considering transient conduction within finned tank