Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Optimizing Mass Transfer Control Using a Stirring Paddle for the Rapid Growth of KDP Crystals

Toward the Understanding of KDP Crystal Surface Height Variation by a Rapid Growth Technique

Mixing Intensification in a Horizontal Self-Cleaning Twin-Shaft Kneader with a Highly Viscous Newtonian Fluid

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Hydrodynamics and mixing process in a horizontal self-cleaning opposite-rotating twin-shaft kneader

Optimizing the Flow Conditions of the Horizontally Oriented DKDP Crystal by Adding a Stirring Paddle

Numerical simulation of flow and mass transfer during the process of large-sized cuboid KDP crystals grown by the LSLM

Homogeneous and Heterogeneous Nucleation of Potash Alum in Drop-Based Microfluidic Device

Optimizing Protein Crystal Growth Through Dynamic Seeding

Cylindrical Spreading of KDP Single Crystal by Method of Vaporization

Reverse growth surface planarization mechanism and high-efficiency polishing of KDP

Influence of Glass-Lined V-Shaped Stirrers on Crystallization Properties

Controlling the size of fragrance microcapsules using designed agitator paddles: Experiment and CFD simulation

Kinetic Study on Crystal Growth of NaCl and K2SO4

Unsteady Numerical Simulation of the Mass Transfer within a Reciprocating Paddle Electroplating Cell

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Control of Crystal Size Distribution using Non-Isothermal Taylor Vortex Flow

Mitigation of Subsurface Damage in Potassium Dihydrogen Phosphate (KDP) Crystals with a Novel Abrasive-Free Jet Process

Ultra-Precision Cutting Mechanism of KDP Crystal in Microplastic Region via Heating Assistance

Accelerating single-crystal growth by stimulated and self-guided channeling

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System