A General and Scalable Approach to Produce Nanoporous Alloy Nanowires with Rugged Ligaments for Enhanced Electrocatalysis

H. -J. Qiu,J. J. Gao,F. -K. Chiang,Y. R. Wen,A. Y. Yao,P. Du,G. Fang,J. Q. Wang,X. J. Liu

DOI: https://doi.org/10.1039/c8ta03544j

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:A general one-step dealloying approach is developed to produce nanoporous alloy nanowires with rugged ligaments and high-density defect sites.

What problem does this paper attempt to address?

Single-Crystalline Dendritic Bimetallic And Multimetallic Nanocubes

Yun Kuang,Ying Zhang,Zhao Cai,Guang Feng,Yingying Jiang,Chuanhong Jin,Jun Luo,Xiaoming Sun

DOI: https://doi.org/10.1039/c5sc01947h

IF: 8.4

2015-01-01

Chemical Science

Abstract:Developing facial synthetic routes for fabrication of multimetallic nanocatalysts with open porous morphology, tunable composition and tailored crystalline structure is a big challenge for fabrication of low-cost electrocatalysts. Here we report on the synthesis of single-crystalline dendritic bimetallic and multimetallic nanocubes via a solvothermal co-reduction method. These cubes show highly porous, complex 3D inner connections but single-crystalline structure. Tuning the reduction kinetics of metal precursors and introducing galvanic reaction at the active sites during growth were believed to be the keys for the formation of such unique nanostructure. Electro-catalytic oxygen reduction (ORR) and methanol oxidation (MOR) on these catalysts showed dramatic enhancements for both cathodic and anodic electrocatalysis in fuel cells, which were attributed to their unique morphology and crystalline structure, as well as synergetic effect of the multi-metallic components. This work uncovers the formation mechanism of such complex single-crystalline dendritic multimetallic nanocrystals and offers a promising synthetic strategy for geometric and crystalline control of multimetallic nanocrystals with tailored physical and chemical properties, which will benefit the development of clean energy.
Nanoporous high-entropy alloys for highly stable and efficient catalysts

Hua-Jun Qiu,Gang Fang,Yuren Wen,Pan Liu,Guoqiang Xie,Xingjun Liu,Shuhui Sun

DOI: https://doi.org/10.1039/c9ta00505f

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:A general dealloying strategy is developed to prepare multi-component alloys with high thermal stability, electrochemical durability, and catalytic activity.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Controlled Dealloying of Alloy Nanoparticles Toward Optimization of Electrocatalysis on Spongy Metallic Nanoframes.

Guangfang Grace Li,Esteban Villarreal,Qingfeng Zhang,Tingting Zheng,Jun-Jie Zhu,Hui Wang

DOI: https://doi.org/10.1021/acsami.6b07309

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Atomic-level understanding of the structural transformations of multimetallic nanoparticles triggered by external stimuli is of vital importance to the enhancement of our capabilities to fine-tailor the key structural parameters and thereby to precisely tune the properties of the nanoparticles. Here, we show that, upon thermal annealing in a reducing atmosphere, Au@Cu2O core-shell nanoparticles transform into Au-Cu alloy nanoparticles with tunable compositional stoichiometries that are predetermined by the relative core and shell dimensions of their parental core-shell nanoparticle precursors. The Au-Cu alloy nanoparticles exhibit distinct dealloying behaviors that are dependent upon their Cu/Au stoichiometric ratios. For Au-Cu alloy nanoparticles with Cu atomic fractions above the parting limit, nanoporosity-evolving percolation dealloying occurs upon exposure of the alloy nanoparticles to appropriate chemical etchants, resulting in the formation of particulate spongy nanoframes with solid/void bicontinuous morphology composed of hierarchically interconnected nanoligaments. The nanoporosity evolution during percolation dealloying is synergistically guided by two intertwining structural rearrangement processes, ligament domain coarsening driven by thermodynamics and framework expansion driven by Kirkendall effects, both of which can be maneuvered by controlling the Cu leaching rates during the percolation dealloying. The dealloyed nanoframes possess large open surface areas accessible by the reactant molecules and high abundance of catalytically active undercoordinated atoms on the ligament surfaces, two unique structural features highly desirable for high-performance electrocatalysis. Using the room temperature electro-oxidation of methanol as a model reaction, we further demonstrate that, through controlled percolation dealloying of Au-Cu alloy nanoparticles, both the electrochemically active surface areas and the specific activity of the dealloyed metallic nanoframes can be systematically tuned to achieve the optimal electrocatalytic activities.
Strained lattice platinum–palladium alloy nanowires for efficient electrocatalysis

Mengyun Ren,Fangfang Chang,Ruifang Miao,Xianhong He,Lin Yang,Xiaolei Wang,Zhengyu Bai

DOI: https://doi.org/10.1039/d0qi00094a

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:The ability to manipulate Pt-based alloy catalysts with controllable compositions and the type of surface facet is important for advancing direct alcohol fuel cells (DAFEs).

chemistry, inorganic & nuclear
Nanomanufacturing of Non-Noble Amorphous Alloys for Electrocatalysis

Vahid Hasannaeimi,Xiaowei Wang,Riyadh Salloom,Zhenhai Xia,Jan Schroers,Sundeep Mukherjee

DOI: https://doi.org/10.1021/acsaem.0c02221

IF: 6.4

2020-11-24

ACS Applied Energy Materials

Abstract:There is a strong surge in interest for hydrogen and direct alcohol fuel cells as zero-emission energy conversion and storage devices due to their high energy density compared to that for batteries and super-capacitors. However, the critical bottleneck in the widespread adoption of fuel cell technology is the high cost of electrocatalysts used in these devices, which may be lowered by minimizing the noble-metal loading and improving their performance. To that end, alloy catalysts have been developed, which incorporate a broad range of nonprecious transition metals and nonmetals. However, such alloys are limited by their phase stability range and are susceptible to poisoning and performance degradation over time. A potential escape from such limitations is provided by amorphous alloys, which can give access to a much broader composition range of favorable chemistry while exhibiting exceptional chemical stability and durability. This potential of broad chemistry is, however, often limited when the amorphous alloy is fabricated by melt quenching. To overcome this limitation, we introduce a facile pulsed electrodeposition approach to synthesize metallic glass nanowire arrays for two-model alloy systems. This highly practical nanomanufacturing route allows the synthesis of fully amorphous nanowires for alloys with little or no noble-metal content, which exhibit excellent performance in terms of electrocatalytic activity and stability toward electro-oxidation of methanol. Density of states calculated using first-principles show strong d-orbital contributions to the states at the Fermi level and electron localization on the surface of the amorphous alloys accounting for their high catalytic activity.This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Nanoporous Gold Thin Film: Fabrication, Structure Evolution, and Electrocatalytic Activity

Hua Dong,Xiaodong Cao

DOI: https://doi.org/10.1021/jp8086607

2008-01-01

Abstract:This paper demonstrates a new and simple approach to fabricate nanoporous structure on gold thin films (similar to 1.5 mu m) via electrochemical alloying and dealloying reactions in ZnCl2/DMSO electrolyte. The relevant parameters affecting the formation of nanoporous structure in the alloying/dealloying process in organic electrolyte and the post-treatment in sulfuric acid solution are investigated in detail by simultaneous electrochemical and field emission scanning electron microscopy (FESEM) characterization. Herein, a new strategy for direct estimation of the end-point in the dealloying process is developed, assuring the success of preparing nanoporous gold (NPG) films with the highest purity and porosity. Our method is especially useful for fabrication of nanoporous structure on ultrathin Au films without any further deposition of Au. The as-prepared NPG thin films are then used as anodic catalysts for borohydride oxidation in the direct borohydride fuel cell (DBFC), which show much higher catalytic activities in contrast to planar gold electrode, indicative of the promising applications in actual DBFC systems. We believe that our work offers a new route to solve the current problems encountered in the development of DBFCs.
Strain-Modulated Platinum-Palladium Nanowires for Oxygen Reduction Reaction.

Fangfang Chang,Zhengyu Bai,Matthew Li,Mengyun Ren,Tongchao Liu,Lin Yang,Chuan-Jian Zhong,Jun Lu

DOI: https://doi.org/10.1021/acs.nanolett.9b05123

IF: 10.8

2020-01-01

Nano Letters

Abstract:Electrocatalytic activity of alloy nanocatalytsts can be manipulated effectively by tuning their physical properties (ensemble, geometric, and ligand effects) to afford optimal surface structure and compositions for proton exchange membrane fuel cell (PEMFC) application. Herein, highly catalytic platinum-palladium nanowires (PtnPd100-n NWs) with a subtle lattice strain and Boerdijk-Coxeter helix type morphology are synthesized through a surfactant-free, thermal single phase solvent method. X-ray diffraction results show that PtnPd100-n NWs are exposed through the (111) facets and their shrinking or expanding lattice parameters can be modulated by the alloy compositions. Electrochemical results reveal that their high catalytic activity correlates with the lattice shrinking, facets, and bimetallic compositions, showing higher activity when the ratio of Pt and Pd is similar to 78:22, which is further supported by DFT results. Compared to the nanoparticle type platinum-palladium alloyed catalysts with similar metal compositions (PtnPd100-n NPs), the PtnPd100-n NWs exhibit significantly improved electrocatalytic activity and stability for the oxygen reduction reaction. These findings open new strategies to design the highly active and stable alloy nanocatalysts with controllable compositions.
Wavy PtCu Alloy Nanowire Networks with Abundant Surface Defects Enhanced Oxygen Reduction Reaction

Dahui Fang,Lei Wan,Qike Jiang,Hongjie Zhang,Xuejun Tang,Xiaoping Qin,Zhigang Shao,Zidong Wei

DOI: https://doi.org/10.1007/s12274-019-2511-8

IF: 9.9

2019-01-01

Nano Research

Abstract:Bimetallic platinum-copper (Pt-Cu) alloy nanowires have emerged as a novel class of fuel cell electrocatalysts for oxygen reduction reaction (ORR) due to their intrinsic high catalytic activity and durability, but preparing such electrocatalysts with clean surface via facile method is still a challenge. Herein, PtCu alloy with nanowire networks (NWNs) structure is obtained by a simple modified polyol method accompanied with a salt-mediated self-assembly process in a water/ethylene glycol (EG) mixing media. The formation mechanism of PtCu NWNs including the morphological evolution and the relevant experimental parameters has been investigated systematically. We propose that a micro-interface in H2O-EG media formed with the assistance of disodium dihydrogen pyrophosphate (Na 2 H 2 P 2 O 7 ) and its unique nature of coordinating with Pt 2+ or Cu 2+ play critical roles in the formation of NWNs. When tested as ORR catalyst, the PtCu NWNs /C exhibits much higher activity and durability than that of Pt NWNs /C and commercial Pt/C, even exceeding the target of DOE in 2020. The excellent performance of PtCu NWNs /C could be attributed to the unique structure of NWNs with 2.4 nm ultrathin wavy nanowires and plentiful surface defects and the modified electronic effect caused by alloying with Cu atoms.
Alloy/strain Engineering of Pt-based Nanowires with Controllable Electronic Structures Towards Boosted Water Electrolysis Catalysis

Jiakang Tian,Senmin Lin,Zhongmin Tang,Runhua Li,Xiaomei Cheng,Zhen Fang,Bin Wang,Jiaheng Peng,Lang Xiao,Benwei Fu,Tao Deng,Jianbo Wu

DOI: https://doi.org/10.1039/d3ma01080e

2024-01-01

Materials Advances

Abstract:Alloying and strain effects (introduced by elements and temperature modulation) of Pt-based nanowires towards boosting the hydrogen evolution reaction.
Dealloying to Nanoporous Au/Pt Alloys and Their Structure Sensitive Electrocatalytic Properties.

Caixia Xu,Rongyue Wang,Mingwei Chen,Yan Zhang,Yi Ding

DOI: https://doi.org/10.1039/b917788d

2010-01-01

Abstract:A simple and general dealloying method is employed to fabricate nanoporous Au/Pt alloys with pre-determined alloy compositions. Structural characterization by electron microscopes demonstrates that selective etching of Cu from Au/Pt/Cu alloy precursors results in the formation of three-dimensional bicontinuous porous network structures with uniform pores and ligaments less than 10 nm. X-Ray photoelectron spectroscopy and X-ray diffraction demonstrate that nanoporous Au/Pt alloys have a single-phase cubic structure with relatively uniform compositions across the samples. These high surface area alloy nanostructures show much enhanced specific activity and distinct surface reactivity toward the electrooxidation of some small organic molecules, such as methanol and formic acid, as the Au content varies within the structure, thus holding great potential for use in clean energy and environmental applications.
A General Strategy Assisted with Dual Reductants and Dual Protecting Agents for Preparing Pt-Based Alloys with High-Index Facets and Excellent Electrocatalytic Performance.

Chenglong Luan,Qing-Xiang Zhou,Yao Wang,Yun Xiao,Xiaoping Dai,Xing-Liang Huang,Xin Zhang

DOI: https://doi.org/10.1002/smll.201702617

IF: 13.3

2017-01-01

Small

Abstract:Synthesizing noble metallic nanoparticles (NPs) enclosed by high-index facets (HIFs) is challenged as it involves the tuning of growth kinetics, the selective adsorption of certain chemical species, and the epitaxial growth from HIF enclosed seeds. Herein, a simple and general strategy is reported by using dual reduction agents and dual capping agents to prepare Pt-based alloy NPs with HIFs, in which both glycine and poly(vinylpyrrolidone) serve as the reductants and capping agents. Due to the facilely tunable growth/nucleation rates and protecting abilities of the reductants and capping agents, Pt concave nanocube (CNC), binary Pt-Ni CNC, ternary Pt-Mn-Cu CNC, and Pt-Mn-Cu ramiform polyhedron alloy NPs terminated by HIFs as well as other NPs with well-defined morphologies such as Pt-Mn-Cu nanocube and Pt-Mn-Cu nanoflower are obtained with this approach. Owing to the high density of low-coordinated Pt sites (HIF structure) and the unique electronic effect of Pt-Mn-Cu ternary alloys, the as-prepared Pt-Mn-Cu NPs show enhanced catalytic activity toward methanol and formic acid electro-oxidation reactions with excellent stability. This work provides a promising methodology for designing and fabricating Pt-based alloy NPs as efficient fuel cell catalyst.
General Preparation for Pt-Based Alloy Nanoporous Nanoparticles As Potential Nanocatalysts

Dingsheng Wang,Peng Zhao,Yadong Li

DOI: https://doi.org/10.1038/srep00037

IF: 4.6

2011-01-01

Scientific Reports

Abstract:Although Raney nickel made by dealloying has been used as a heterogeneous catalyst in a variety of organic syntheses for more than 80 years, only recently scientists have begun to realize that dealloying can generate nanoporous alloys with extraordinary structural characteristics. Herein, we achieved successful synthesis of a variety of monodisperse alloy nanoporous nanoparticles via a facile chemical dealloying process using nanocrystalline alloys as precursors. The as-prepared alloy nanoporous nanoparticles with large surface area and small pores show superior catalytic properties compared with alloyed nanoparticles. It is believed that these novel alloy nanoporous nanoparticles would open up new opportunities for catalytic applications.
A General Strategy to Synthesize Ultrathin Palladium/Transition Metal Alloy Nanowires: Anti-Poisoned Electrocatalytic Performance for the Oxygen Reduction Reaction in Acidic and Alkaline Media

Hassan Ali,Haifeng Lin,Qichen Lu,Xun Wang

DOI: https://doi.org/10.1021/acs.jpcc.1c03385

2021-01-01

Abstract:Cost-effective, active, and durable electrocatalyst is an integral requirement for a practical fuel cell. To achieve multifunctional electrocatalytic properties in one catalyst is always preferred. Inspired by the distinctive properties and outstanding catalytic performance of one-dimensional (1D) nanowires for electrocatalytic reactions, a one-pot, one-step noble metal-induced reduction method is reported to synthesize ultrathin diameter palladium-based multimetallic PdBiM (M = Mo, Mn, Co, Cu) alloy nanowires with excellent electrocatalytic performance in the oxygen reduction reaction (ORR). The synthesized alloy nanowires showed ORR and remarkable tolerance against the small molecular poisoning species (i.e., SOx, NOx, POx, CO, etc.) in acidic and alkaline media. This work implicates a new direction for the controlled synthesis of multifunctional 1D alloy nanowires that may provide new openings for enhancing catalytic activities and tolerance against the poisoning species in the practical fuel cells.
Gold nanorod-templated synthesis of polymetallic hollow nanostructures with enhanced electrocatalytic performance.

Xia Guo,Wei Ye,Rui Zhu,Wenxin Wang,Fang Xie,Hongyan Sun,Qing Zhao,Yi Ding,Jian Yang

DOI: https://doi.org/10.1039/c4nr02982h

IF: 6.7

2014-01-01

Nanoscale

Abstract:Anisotropic polymetallic hollow nanostructures are highly desired for many applications because of their unique morphology, large specific surface areas and attractive electronic effects. Here, a simple method using gold nanorods as a self-sacrificed template has been developed for the fabrication of hollow dumbbell-like nanorods of Au@PtAg. The formation of the hollow structures involves the growth of another metallic shell first, and then the etching of gold nanorods, which is induced by oxygen and ascorbic acid. The lattice mismatch and cohesive energy of the shell, along with its surface passivation, greatly affect the subsequent etching and the resulting products, as has been demonstrated by a positive control in the case of Rh and a negative control in the case of Pd. Hollow dumbbell-like nanorods of Au@PtAg show great enhancement for the dehydrogenation pathway in the oxidation of formic acid, as compared to solid Au@PtAg nanorods, PtAu nanotubes and commercial Pt/C.
Evolution of Nanoporous Pt–Fe Alloy Nanowires by Dealloying and their Catalytic Property for Oxygen Reduction Reaction

jianglan shui,chen chen,j c m li

DOI: https://doi.org/10.1002/adfm.201100723

IF: 19

2011-01-01

Advanced Functional Materials

Abstract:The short life and high cost of carbon-supported Pt nanoparticle catalysts (Pt/C) are two main problems with proton exchange membrane fuel cells. Porous Pt alloy nanowires have more durability and catalytic activity than Pt/C. Dealloying is a facile way to make nanoporous Pt. However, the process of porosity formation is difficult to control. In this paper, electrospinning and chemical dealloying techniques are used to make long, thin and yet nanoporous Pt-Fe alloy nanowires. The evolution of nanoporosity is observed and studied. It is found that non-uniform composition in the precursor PtFe(5) alloy nanowires helps the formation of nanoporous structure. The overall wire diameter is about 10-20 nm and the ligament diameter only 2-3 nm. These porous long nanowires interweave to form a self-supporting network with a high specific activity, 2.3 times that of conventional Pt/C catalysts, and also have better durability.
Fabrication of large-scale nanoporous nickel with a tunable pore size for energy storage

H. J. Qiu,Jianli Kang,Pan Liu,Akihiko Hirata,Takeshi Fujita,Mingwei Chen

DOI: https://doi.org/10.1016/j.jpowsour.2013.08.070

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:Nanoporous Ni with a tunable nanopore size and chemical compositions was fabricated by dealloying a Ni30Mn70 precursor alloy at various temperatures. The influence of electrochemical parameters on the formation of large-scale nanoporous Ni was systematically investigated. Different from the fabrication of nanoporous noble metals (Au, Pt and Pd), the dealloying of Ni30Mn70 includes three kinetically competitive processes: dissolution of Mn, interface diffusion of Ni and dissolution of Ni. The nanopore size and residual Mn can be tailored by controlling the dealloying time, temperature and applied potential. The as-dealloyed nanoporous Ni with a large internal surface area, excellent conductivity and naturally formed oxide surface can be directly used as a free-standing electrode for electrochemical supercapacitors with a high capacitance and excellent cycling stability. (C) 2013 Elsevier B.V. All rights reserved.
Defect-Rich, Candied Haws-Shaped AuPtNi Alloy Nanostructures for Highly Efficient Electrocatalysis

Xiaoya Cui,Zhicheng Zhang,Yue Gong,Faisal Saleem,Bo Chen,Yonghua Du,Zhuangchai Lai,Nailiang Yang,Bing Li,Lin Gu,Hua Zhang

DOI: https://doi.org/10.31635/ccschem.020.201900031

2020-01-01

CCS Chemistry

Abstract:The rational design and synthesis of multimetallic nanostructures (NSs) with rich defects are of significant importance for their diverse applications, including their promising usage as high-efficiency catalysts for alcohol oxidation reaction as a fuel source. Here, we report the synthesis of defect-rich, candied haws-shaped AuPtNi NSs using presynthesized gold (Au) nanowires as templates. The ternary AuPtNi NSs possess rich defects such as twins, stacking faults, and atomic steps. Impressively, the AuPtNi NSs exhibited excellent mass and specific activities toward methanol and ethanol oxidation reactions under acidic conditions. Our current work paves the way for the rational design and controlled synthesis of defect-rich multimetallic NSs to boost their performances in catalytic reactions.
Creation of Controllable High-Density Defects in Silver Nanowires for Enhanced Catalytic Property

Chaoqi Wang,Zhaorui Zhang,Guang Yang,Qiang Chen,Yadong Yin,Mingshang Jin

DOI: https://doi.org/10.1021/acs.nanolett.6b02317

IF: 10.8

2016-01-01

Nano Letters

Abstract:Structural defects have been proven to determine many of the materials' properties. Here, we demonstrate a unique approach to the creation of Ag nanowires with high-density defects through controllable nanoparticles coalescence in one-dimensional pores of mesoporous silica. The density of defects can be easily adjusted by tuning the annealing temperature during synthetic process. The high-density defects promote the adsorption and activation of more reactants on the surface of Ag nanowires during catalytic reactions. As a result, the as-prepared Ag nanowires exhibit enhanced activities in catalyzing dehydrogenative coupling reaction of silane in terms of apparent activation energy and turnover frequency (TOF). We show further that the silane conversion rate can be enhanced by maximizing the defect density and thus the number of active sites on the Ag nanowires, reaching a remarkable TOF of 8288 h(-1), which represents the highest TOF that has been achieved by far on Ag catalysts. This work not only proves the important role of structural defects in catalysis but also provides a new and general strategy for constructing high-density defects in metal catalysts.
Formation and control of nanoporous Pt ribbons by two-step dealloying for methanol electro-oxidation

Xiaolong Zhang,Guijing Li,Dong Duan,Haiyang Wang,Zhanbo Sun

DOI: https://doi.org/10.1016/j.corsci.2018.02.030

IF: 7.72

2018-01-01

Corrosion Science

Abstract:•Novel ultrafine nanoporous Pt ribbons were fabricated by dealloying melt-spun Al-Pt-Ce alloys.•The as-dealloyed Pt ribbons exhibited a hierarchical nanoporous architecture.•The specific surface area of the NP-Pt reached up to 85.38 m2g−1.•Nanoporous Pt exhibited enhanced electro-catalytic performance and stability.

A General and Scalable Approach to Produce Nanoporous Alloy Nanowires with Rugged Ligaments for Enhanced Electrocatalysis

Single-Crystalline Dendritic Bimetallic And Multimetallic Nanocubes

Nanoporous high-entropy alloys for highly stable and efficient catalysts

Controlled Dealloying of Alloy Nanoparticles Toward Optimization of Electrocatalysis on Spongy Metallic Nanoframes.

Strained lattice platinum–palladium alloy nanowires for efficient electrocatalysis

Nanomanufacturing of Non-Noble Amorphous Alloys for Electrocatalysis

Nanoporous Gold Thin Film: Fabrication, Structure Evolution, and Electrocatalytic Activity

Strain-Modulated Platinum-Palladium Nanowires for Oxygen Reduction Reaction.

Wavy PtCu Alloy Nanowire Networks with Abundant Surface Defects Enhanced Oxygen Reduction Reaction

Alloy/strain Engineering of Pt-based Nanowires with Controllable Electronic Structures Towards Boosted Water Electrolysis Catalysis

Dealloying to Nanoporous Au/Pt Alloys and Their Structure Sensitive Electrocatalytic Properties.

A General Strategy Assisted with Dual Reductants and Dual Protecting Agents for Preparing Pt-Based Alloys with High-Index Facets and Excellent Electrocatalytic Performance.

General Preparation for Pt-Based Alloy Nanoporous Nanoparticles As Potential Nanocatalysts

A General Strategy to Synthesize Ultrathin Palladium/Transition Metal Alloy Nanowires: Anti-Poisoned Electrocatalytic Performance for the Oxygen Reduction Reaction in Acidic and Alkaline Media

Gold nanorod-templated synthesis of polymetallic hollow nanostructures with enhanced electrocatalytic performance.

Evolution of Nanoporous Pt–Fe Alloy Nanowires by Dealloying and their Catalytic Property for Oxygen Reduction Reaction

Fabrication of large-scale nanoporous nickel with a tunable pore size for energy storage

Defect-Rich, Candied Haws-Shaped AuPtNi Alloy Nanostructures for Highly Efficient Electrocatalysis

Creation of Controllable High-Density Defects in Silver Nanowires for Enhanced Catalytic Property

Formation and control of nanoporous Pt ribbons by two-step dealloying for methanol electro-oxidation