Abstract:A dual-machine horizontal automatic drilling and riveting system for aircraft panel assembly is presented in this paper. Two cooperative machines are adopted, like a two-robot system, to achieve the unobstructed workspace, so it can be applied in an efficient assembly line. Different from the current deign wisdom to ensuring the riveting accuracy by increasing the machine stiffness, which detrimentally results in higher masses to be moved and sophisticated reinforcements being used, this paper proposes a disturbance observer (DOB) based design method of riveting force controller for adaptive riveting with high accuracy driven heads, reducing the dependence of automatic riveting on high stiffness of machine. This method simplifies the force-induced deformation error compensation problem to a force control problem, which has rarely been studied before in literature. The separate layout leads to weak machine stiffness in the whole workspace and the stiffness varies with machine pose greatly, which makes it difficult to establish an accurate force-induced deformation error compensation model. To make the riveting machine precisely generate the desired force under such stiffness-varying conditions, a robust control algorithm is designed: the disturbance observer is introduced to address the robust stability against model parameter variance caused by the change of system stiffness with pose, and the feedforward controller can achieve the high-bandwidth force control to ensure the riveting efficiency. The model identification experiments are carried out for different machine stiffness. Validation riveting experiments have been conducted to verify the proposed controller on the dual-machine riveting system. The results show that, compared with previous displacement control, the proposed force controller can ensure the consistency of driven heads through accurate force control.

Jamming Analysis and Force Control for Flexible Dual Peg-in-Hole Assembly.

Force control for a rigid dual peg-in-hole assembly

Learning-based Optimization Algorithms Combining Force Control Strategies for Peg-in-Hole Assembly.

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Contact Analysis for Dual Peg-in-hole Assembly of Automobile Alternator Frame

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Geometrically Non-Linear Force Method for Assemblies with Infinitesimal Mechanisms

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Position/Force Visual-Sensing-Based Robotic Sheet-Like Peg-in-Hole Assembly

Piecewise Strategy and Decoupling Control Method for High Pose Precision Robotic Peg-in-hole Assembly

Feature-Based Compliance Control for Peg-in-Hole Assembly with Clearance or Interference Fit

Feature-Based Compliance Control for Precise Peg-in-Hole Assembly

Research on Robotic Flexible Peg-in-hole Assembly Technology

Tolerance Analysis of Wedge Assembly Considering Impact Force

Force–vision Fusion Fuzzy Control for Robotic Batch Precision Assembly of Flexibly Absorbed Pegs

An Approach for Peg-in-Hole Assembling Based on Force Feedback Control

Jamming problems and the effects of compliance in dual peg-hole disassembly

A Noncontact Control Strategy for Circular Peg-in-Hole Assembly Guided by the 6-DOF Robot Based on Hybrid Vision

Characterizing the mechanics of rectangular peg–hole disassembly and the effect of the active compliance centre on the extraction force