Abstract:Ni-rich Li(NixCoyMnz)O2 (x ≥ 0.8)-layered oxide materials are highly promising as cathode materials for high-energy-density lithium-ion batteries in electric and hybrid vehicles. However, their tendency to undergo side reactions with electrolytes and their structural instability during cyclic lithiation/delithiation impairs their electrochemical cycling performance, posing challenges for large-scale applications. This paper explores the application of an Al2O3 coating using an atomic layer deposition (ALD) system on Ni-enriched Li(Ni0.8Co0.1Mn0.1)O2 (NCM811) cathode material. Characterization techniques, including X-ray diffraction, scanning electron microscopy, and transmission electron microscopy, were used to assess the impact of alumina coating on the morphology and crystal structure of NCM811. The results confirmed that an ultrathin Al2O3 coating was achieved without altering the microstructure and lattice structure of NCM811. The alumina-coated NCM811 exhibited improved cycling stability and capacity retention in the voltage range of 2.8-4.5 V at a 1 C rate. Specifically, the capacity retention of the modified NCM811 was 5%, 9.11%, and 11.28% higher than the pristine material at operating voltages of 4.3, 4.4, and 4.5 V, respectively. This enhanced performance is attributed to reduced electrode-electrolyte interaction, leading to fewer side reactions and improved structural stability. Thus, NCM811@Al2O3 with this coating process emerges as a highly attractive candidate for high-capacity lithium-ion battery cathode materials.

Suppressing the Voltage Fading of Li[Li0.2Ni0.13Co0.13Mn0.54]O-2 Cathode Material Via Al2O3 Coating for Li-Ion Batteries

Suppressed Voltage Decay and Improved Electrochemical Performance by Coating LiAl5O8 on the Surface of Li1.2Mn0.54Ni0.13Co0.13O2

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Probing and Suppressing Voltage Fade of Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 Cathode Material for Lithium-Ion Battery

Promoting the Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Via LaAlO3 Coating

The Surface Al2o3 Coating and Bulk Zr Doping Drastically Improve the Voltage Fade and Cycling Stability of Li(Ni0.8mn0.1co0.1)O2 Cathode Materials

Investigation the Electrochemical Performance of Li1.2Ni0.2Mn0.6O2 Cathode Material with ZnAl2O4 Coating for Lithium Ion Batteries

Modification research of LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 as a cathode material for lithium-ion battery

Enhanced electrochemical properties of Li1·2Ni0·13Co0·13Mn0·54O2 coated with Al2O3 nano-film

Li[Li0.20Ni0.128Co0.136Mn0.536]O2 Cathode Material for Lithium-Ion Batteries

Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD

A Novel Strategy to Suppress Capacity and Voltage Fading of Li‐ and Mn‐Rich Layered Oxide Cathode Material for Lithium‐Ion Batteries

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

The effects of quenching treatment and AlF3 coating on LiNi0.5Mn0.5O2 cathode materials for lithium-ion battery

Enhanced high-voltage properties of LiCoO 2 coated with Li[Li 0.2 Mn 0.6 Ni 0.2 ]O 2

Enhanced structurally stable cathodes by surface and grain boundary tailoring of Ni-Rich material with molybdenum trioxide

Inhibited voltage decay and enhanced electrochemical performance of the Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material by CeAlOδ surface coating modification

Improved Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material Coated with Ultrathin ZnO

Highly Stable Li1.2mn0.54co0.13ni0.13o2 Enabled By Novel Atomic Layer Deposited Aipo(4) Coating

Suppressing the Voltage Decay of Li1.2Mn0.6Ni0.2O2 Cathode Materials Enabled by LiMn0.8Fe0.2PO4/C for Long-Cycling Lithium-Ion Batteries

Nanoscale Surface Modification of Lithium‐Rich Layered‐Oxide Composite Cathodes for Suppressing Voltage Fade