Abstract:Gold nanoparticles supported on Fe2O3 are a promising type of catalyst for CO oxidation. One challenge for their application in the real world is developing novel monolithic catalytic packings to meet the fundamental criteria (for example, high catalyst utilization efficiency and low pressure drop) needed for such high-throughput reaction process. Herein, a highly active and efficient thin-felt microfibrous-structured Au-alpha-Fe2O3/ns-gamma-Al2O3/Al-fiber catalyst with unique form factor and high permeability is fabricated for the low-temperature CO oxidation. Initially, thin-felt Al-fiber felt (60 gm diameter; 85 vol% voidage) undergoes a steam-only oxidation and calcination to create a 0.7 mu m mesoporous layer of gamma-Al2O3 nanosheets (ns-gamma-Al2O3) along with the Al-fiber. Subsequently, alpha-Fe2O3 is hydrothermally grown onto the ns-gamma-Al2O3 layer followed by Au nanoparticle deposition via urea-assistant deposition-precipitation method. As-resulted microfibrous-structured Au-alpha-Fe2O3/ns-gamma-Al2O3/Al-fiber catalysts effectively and efficiently couple the low-temperature activity and improved water vapor tolerance with enhanced catalyst accessibility and high permeability. The promising microfibrous-structured catalyst with only 0.14 wt% Au and 1.4 wt% alpha-Fe2O3 is capable of fully or 40% oxidizing CO into CO2 at 25 degrees C or 0 degrees C for a feed gas of 2 vol% CO and 0.3 vol% water vapor in air at a high linear velocity of 0.7 cm s(-1) using a high gas hourly space velocity of 25,200 mL g-1 cat h(-1). Moreover, the microfibrous-structured catalyst performs robustly for at least 232 h under the changeable temperature conditions. Interestingly, 3D hierarchical porous flake structure of alpha-Fe2O3 nano-sheets is detected other than the irregular micron-sized particles, leading to a 3-fold increase in the intrinsic activity (TOF of 0.46 s(-1) for the Au-alpha-Fe2O3/ns-gamma-Al2O3/Al-fiber vs. 0.11 s(-1) for the Au-alpha-Fe2O3 powder at 25 degrees C).

Preparation of Metallic Monolithic Pt/FeCrAl Fiber Catalyst by Suspension Spraying for VOCs Combustion.

Novel metallic electrically heated monolithic catalysts towards VOC combustion

A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

Facile and Flexible Preparation of Highly Active CuCe Monolithic Catalysts for VOCs Combustion

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

A Composite Fe–V/g-C3N4 for Liquid-Phase Selective Oxidation of Methanol with O2 Oxidant

CuO-CeO2/Al2O3/FeCrAl monolithic catalysts prepared by in situ combustion synthesis method for preferential oxidation of carbon monoxide

Thin-felt Microfibrous-Structured Au-α-Fe2O3/ns-γ-Al2O3/Al-fiber Catalyst for High-Throughput CO Oxidation

Preparation of highly dispersed metallic Pt nanoparticle catalysts for low-temperature propene combustion

Bimetallic Pt-Co Nanoparticle Deposited on Alumina for Simultaneous CO and Toluene Oxidation in the Presence of Moisture

Toward the Decoration of Pt Nanoparticles Supported on Carbon Nanotubes with Fe Oxides and Its Effect on the Catalytic Reaction

Mechanical Stability of Monolithic Catalysts: Improving Washcoat Adhesion by FeCrAl Alloy Substrate Treatment

Multistep Quenching of a Rust-Derived Catalyst for Enhanced Volatile Organic Compound Catalytic Oxidation

Fabrication of γ-Al2O3 Nanoarrays on Aluminum Foam Assisted by Hydroxide for Monolith Catalysts

CuO-CeO_2/Al_2O_3/FeCrAl monolithic catalysts prepared by in situ combustion synthesis method for preferential oxidation of carbon monoxide

One-Step Synthesis of a High Performance Pt-Fe3O4 Catalyst: Intermetallic Al13Fe4 as a Platform and Precursor

Strong Electronic Interaction Of Amorphous Fe2o3 Nanosheets With Single-Atom Pt Toward Enhanced Carbon Monoxide Oxidation

Preparation and Evaluation of FeMnTi Monolithic Catalysts for High‐Efficiency CO Oxidation

Synthesis of PtCoNiRu/C nanoparticles by spray drying combined with reduction sintering for methanol electro-oxidation

Alloy strategy to synthesize Pt-early transition metal oxide interfacial catalysts

Optimizing the Catalytic Activity of Flame‐spray‐pyrolyzed Pt/Fe2O3 Catalyst Toward CO Oxidation: Effect of Fluorination and Reduction