Co 3 O 4 and its composites for high-performance Li-ion batteries

Yuxin Shi,Xiaofan Pan,Bing Li,Mingming Zhao,Huan Pang

DOI: https://doi.org/10.1016/j.cej.2018.03.024

IF: 15.1

2018-01-01

Chemical Engineering Journal

Abstract:•Co3O4, is known as a promising anode material for Li-ion batteries.•The synthesis of Co3O4 with different nanostructures are introduced carefully.•The application of Co3O4 based materials in LIBs are introduced carefully.

What problem does this paper attempt to address?

Recent Development of Co3o4 and Its Composites As Anode Materials of Lithium-Ion Batteries

Huang Guoyong,Xu Shengming,Wang Junlian,Li Linyan,Wang Xuejun

DOI: https://doi.org/10.6023/a13060656

2013-01-01

Acta Chimica Sinica

Abstract:The depletion of non-renewable fossil fuels and environmental issues force us to explore substitutes for fossil fuels, such as solar energy, hydroelectricity, thermal enegy, wind power etc., which are the potential global energy sources in the future. However, most of the renewable energy are typically periodic or intermittent and need to equip with appropriate electrical energy storage devices, such as lithium-ion batteries (LIBs). Novel and advanced anode and cathode materials are the key technologies for high performance LIBs, so various electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as the anode materials for LIBs, has attracted extensive interest due to its high theoretical specific capacity (890 mAh.g(-1)), high tap density and stable chemical properties. However, its practical use is hindered because of the large volume change during repeated lithium uptake and removal reactions, low electronic conductivity, rapid capacity fading upon extended cycling and poor rate capability. To overcome these problems, it is an effective way to prepare nanometer-sized materials with nano-/micrometer-sized structures, which can buffer huge volume changes during the lithium insertion/extraction process and offer extra space for the lithium storage. Up to now, various morphologies of Co3O4 have been synthesized, such as nanoparticles, nanospheres, nanorods, nanowires, nanotubes, nanosheets, nanoplatelets, nanocubes, hierarchical nanoflowers and some other more complex structures. Another method is to composite with other materials such as carbon or graphene, which has large surface area, open porous structure, great flexibility, chemical stability, high electrical conductivity and the ability to facilitate electron transport within the active sites and effectively alleviate the strain from the volume expansion. In this paper, the recent advances of Co3O4 and its composites as anode materials of LIBs are reviewed. The researches are classified by the characteristics and morphologies of materials. Their advantages and disadvantages are summarized and the possible reaction mechanisms are explained. In addition, it is also discussed how to improve the electrochemical performance of Co3O4.
High performance of Co 3 O 4 @carbon composites as anodes for Lithium‐ion batteries

Huan Xie,Guang Yang,Zhenyu Cai,Ze Li,Yinwei Wang

DOI: https://doi.org/10.1002/jctb.7082

IF: 3.709

2022-04-08

Journal of Chemical Technology and Biotechnology

Abstract:Metal oxides suffer from huge volume changes and poor electrical conductivity as anode materials in lithium‐ion batteries. Many nanostructures have been designed to improve the electrochemical performance of metal oxide anodes. In this work, Co3O4@carbon composites are prepared via hydrothermal reaction. The as‐prepared Co3O4@carbon composites displayed good lithium storage performance and excellent cycling stability. The Co3O4@carbon anode showed a high capacity of 986 mAh/g after 100 cycles at 0.2 C. The superior electrochemical performance of the Co3O4@carbon anode is attributed to its unique hybrid structure, which can improve electrical conductivity and act as a buffer for the volume change during electrochemical reactions. © 2022 Society of Chemical Industry (SCI).

engineering, chemical,biotechnology & applied microbiology, environmental,chemistry, multidisciplinary
Co3O4@graphene Composites As Anode Materials for High-Performance Lithium Ion Batteries.

Baojun Li,Huaqiang Cao,Jin Shao,Guoqiang Li,Meizhen Qu,Gui Yin

DOI: https://doi.org/10.1021/ic1023086

IF: 4.6

2011-01-01

Inorganic Chemistry

Abstract:This paper reports on the synthesis of Co(3)O(4)@graphene composites (CGC) and their applications as anode materials in lithium ion batteries (LIBs). Through a chemical deposition method, Co(3)O(4) nanoparticles (NPs) with sizes in the range of 10-30 nm were homogeneously dispersed onto graphene sheets. Due to their high electrical conductivity, the graphene sheets in the CGC improved the electrical conductivity and the structure stability of CGC. CGC displayed a superior performance in LIBs with a large reversible capacity value of 941 mA hg(-1) in the initial cycle with a large current density and an excellent cyclic performance of 740 mA hg(-1) after 60 cycles, corresponding to 88.3% of the theoretical value of CGC, owing to the interactions between graphene sheets and Co(3)O(4) NPs anchored on the graphene sheets. This synthesis approach may find its application in the design and synthesis of novel electrode materials used in LIBs.
Co3O4/LaCoO3 nanocomposites derived from MOFs as anodes for high-performance lithium-ion batteries

Jie Chen,Peng-Fei Wang,Ying Kang,Yu-Hang Zhang,Dao-Xiang Yang,Fa-Nian Shi

DOI: https://doi.org/10.1016/j.inoche.2022.109447

IF: 3.428

2022-06-01

Inorganic Chemistry Communications

Abstract:Co3O4 has been extensively studied due to its high theoretical capacity in lithium ion batteries (LIBs) anode materials. Unfortunately, the large volume change of Co3O4 during charging and discharging causes severe capacity degradation, which limits its practical application. In this paper, the metal organic framework (MOF) synthesized by the microwave method was used as the precursor, and the Co3O4/LaCoO3 nanocomposite with unique heterostructure was synthesized by calcination. The introduction of LaCoO3 improves the lithium storage performance and structural stability of Co3O4. Under the best doping ratio, the reversible charging capacity of Co3O4/LaCoO3 reaches 1024 mAh/g (after 100 cycles), breaking the theoretical capacity limit of Co3O4. Impressively, even at a high current density of 1 A/g, the composite electrode still exhibits an ultra-high reversible capacity of 799 mAh/g. The excellent electrochemical performance of Co3O4/LaCoO3 is attributed to the introduction of LaCoO3 which provides a buffer space for electrode volume changes and shortens the diffusion path of Li+. Finally, kinetic analysis shows that the capacity and stability enhancement mechanism is related to the ultra-high capacitance ratio of the composite material (94.7% at 1 mV/s). This study demonstrates a MOF in-situ synthesis project: a way to overcome the capacity and cycle limitations of Co3O4 in LIBs anodes by compounding lanthanide perovskites.

chemistry, inorganic & nuclear
Porous Polyhedral and Fusiform Co3O4 Anode Materials for High-Performance Lithium-Ion Batteries

Guoyong Huang,Shengming Xu,Shasha Lu,Linyan Li,Hongyu Sun

DOI: https://doi.org/10.1016/j.electacta.2014.05.023

IF: 6.6

2014-01-01

Electrochimica Acta

Abstract:Co3O4 is commonly used as a potential anode material for Li-ion batteries (LIBs). In this study, novel porous polyhedral and fusiform Co3O4 powders have been synthesized successfully through the hydrothermal method with different solvents followed by thermal treatment. It is shown that both of the polyhedrons (1.0-3.0μm in side length) and the spindles (2.0-5.0μm in length, 0.5-2.0μm in width) are composed of similar irregular nanoparticles (20-200nm in diameter, 20-40nm in thickness) bonded to each other. Evaluated by electrochemical measurements, both of them have high initial discharge capacities (1374.4 mAhg−1 and 1326.3 mAhg−1) and enhanced cycling stabilities at the low rate (the capacity retention ratios at 0.1C after 70 cycles are 91.6% and 92.2%, respectively). However, the rate capability of the spindles (93.8%, 90.1% and 98.9% of the second discharge capacities after 70 cycles at 0.5C, 1C and 2C, respectively) is better than the polyhedrons’ (only 76.2%, 42.1% and 59.3% under the same conditions). Remarkable, the unique morphologies and special structures may be extended to synthesize other similar transition metal oxides (NiO, Fe3O4, et al.) as high performance anodes for LIBs.
Fe3O4/C Composites Synthesized from Fe-based Xerogels for Anode Materials of Li-ion Batteries

Xiao Yan Chen,Bin Hong Liu,Zhou Peng Li

DOI: https://doi.org/10.1016/j.ssi.2014.04.004

IF: 3.699

2014-01-01

Solid State Ionics

Abstract:In this study, Fe3O4/carbon nanocomposites as anode materials of Li-ion batteries were synthesized through heating hierarchically porous Fe-based xerogels under N2 atmosphere. The pyrolysis of amorphous Fe-xerogel base materials resulted in the simultaneous formation of Fe3O4/C composites, in which Fe3O4 particles of less than 50nm were uniformly dispersed and embedded in a porous carbon matrix. Due to the favorable nanostructure, the synthesized Fe3O4/C composites with a proper carbon content of 18.8wt.% exhibited good electrochemical performance including high capacity and rate capability as well as much enhanced cyclic stability.
Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Huang Guo-Yong,Xu Sheng-Ming,Li Lin-Yan,Wang Xue-Jun,Lu Sha-Sha

DOI: https://doi.org/10.3866/pku.whxb201404221

2014-01-01

Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.
Introducing heteroatoms, oxygen vacancies and heterostructures in Co 3 O 4 wrapped in carbon nanofibers by low-temperature vulcanization for lithium-ion storage

Daming Chen,Zhen Wang,Youchun Wu,Pan Feng,Weijuan Wang,Zhiquan Huang,Jian Chen

DOI: https://doi.org/10.1016/j.jallcom.2023.172529

IF: 6.2

2023-10-19

Journal of Alloys and Compounds

Abstract:Co 3 O 4 is considered to be a promising anode material for lithium-ion batteries (LIBs) owing to the high theoretical specific capacity. Nevertheless, its electrochemical performance is not ideal due to structural instability arising from significant volume expansion and poor reaction kinetics. Herein, the electronic structure of Co 3 O 4 is optimized by a one-step low-temperature vulcanization method to form CoO-Co 3 O 4 heterostructures embedded in the carbon nanofibers (CNF, about 400 nm) shell, which is denoted as S-Co 3 O 4 -CoO/CNF. The target anode material has rich heterostructure interfaces, oxygen vacancies, and a unique 3D network core-shell structure, which significantly improves the conductivity and reaction kinetics. The improvement has been verified through experimental results and Density Functional Theory (DFT) calculations. As expected, the S-Co 3 O 4 -CoO/CNF anode shows excellent rate performance (324.6 mAh g −1 at 10 A/g) and cycling stability (591.2 mAh g −1 after 600 cycles at 1 A/g). Moreover, lithium-ion full cell assembled with LiFePO 4 cathode still exhibits good electrochemical performance. Hence, it is expected that the vulcanization method for optimizing electronic structures and constructing heterostructures provides valuable insights for the development of high-performance energy storage materials.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Metal organic framework derived Co3O4/Co@N–C composite as high-performance anode material for lithium-ion batteries

Shiquan Guo,Jingbing Liu,Qianqian Zhang,Yuhong Jin,Hao Wang

DOI: https://doi.org/10.1016/j.jallcom.2020.157538

IF: 6.2

2021-02-01

Journal of Alloys and Compounds

Abstract:In this work, a scalable approach of preparing Co3O4/Co@N–C composite derived from metal organic frameworks (MOFs) is developed. After consecutive carbonization and oxidation of MOFs at different calcination temperatures, a series of nanocomposite consisting of Co3O4, conductive Co nanoparticles, and Nitrogen doped (N-doped) mesoporous carbon are obtained via in-situ polymerization strategy. When employed as anode materials for lithium-ion batteries (LIBs), the Crystalline-Co3O4/Co@N–C-700 (Cry-Co3O4/Co@N–C-700) electrode has shown high reversible specific capacity of 896.5 mAh g−1 at 0.1 A g−1, excellent rate capability of 376.2 mAh g−1 at a large current density of 2 A g−1, and robust long-term capacity retention rate of 96.0% at 0.2 A g−1 after 50 cycles. Such superior lithium storage performance could be attributed to the unique porous structure which composed of well-dispersed Co3O4 and conductive Co nanoparticles together with N-doped carbon skeleton. The unique structure can effectively improve the conductivity and act as a buffer medium to alleviate the volume change, which shows potential application for new energy storage materials.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

Dujiang Lu,Chao Yuan,Mengchun Yu,Yinghui Yang,Chao Wang,Rongzhang Guan,Xiufang Bian

DOI: https://doi.org/10.1021/acsomega.0c02037

IF: 4.1

2020-08-19

ACS Omega

Abstract:Transition-metal oxides are attracting considerable attention as anodes for lithium-ion batteries because of their high reversible capacities. However, the drastic volume change and inferior electrical conductivity greatly retard their widespread applications in lithium-ion batteries. Herein, three-dimensional nanoporous composites of CoOx (CoO and Co3O4) quantum dots and zeolitic imidazolate framework-67-derived carbon are fabricated by a precipitation method. The carbon prepared by carbonization of zeolitic imidazolate framework-67 can greatly enhance the electrical conductivity of the composite anodes. CoOx quantum dots anchored firmly on zeolitic imidazolate framework-67-derived carbon can effectively inhibit the aggregation and volume change of CoOx quantum dots during lithiation/delithiation processes. The nanoporous structure can shorten the ion diffusion paths and maintain the structural integrity upon cycling. Meanwhile, kinetics analysis reveals that a capacitance mechanism dominates the lithium storage capacity, which can greatly enhance the electrochemical performance. The composite anodes show a high discharge capacity of 1873 mAh g–1 after 200 cycles at 200 mA g–1, ultralong cycle life (1246 mAh g–1 after 900 cycles at 1000 mA g–1), and improved rate performance. This work may provide guidelines for preparing cobalt oxide-based anodes for LIBs.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Co3O4/RGO Nanoparticles Fabricated by Facile Solvothermal Method as an Anode Material for High‐Performance Lithium‐Ion Batteries

Jiping Zhu,Fuhao Zeng,Zeping Ma,Weihao Tang

DOI: https://doi.org/10.1002/slct.202305080

2024-05-02

ChemistrySelect

Abstract:In this work, we present a facile and scalable method to prepare Co3O4/RGO nanoparticles with superior microstructure by solvothermal and subsequent calcination. The Co3O4/RGO nanoparticles obtained at 550 °C demonstrated a high reversible capacity of 1191.9 mAh g−1 with capacity retention ratios of 98.9 % after 100 cycles at 0.5 A g−1. The facile synthesis method of Co3O4/RGO nanoparticles would offer possibilities for the development of high‐performance anode material for LIBs. A potential anode material for lithium‐ion batteries (LIBs), Co3O4 has been widely considered by many scholars because of its excellent properties in terms of electrochemical characteristics and theoretical specific capacity. However, according to the existing research results, we found that the improvement of the electrochemical performance of Co3O4 has encountered a bottleneck because its intrinsic conductivity is not high enough, and more importantly, the volume expansion is too significant during the charge and discharge process, which leads to the material structure breaking. Therefore, this paper proposes a simple and scalable solvothermal and subsequent calcination method to prepare Co3O4 and reduced graphene oxide (RGO) composite nanoparticles with superior microstructures, and their morphological and electrochemical properties were investigated at different calcination temperatures. As a high‐performance anode material for lithium‐ion batteries, the Co3O4/RGO nanoparticles obtained at 550 °C exhibited terrific initial discharge capacity of 1714.2 mAh g−1, the reversible specific capacity of 1191.9 mAh g−1 with quality coulombic efficiency 98.17 % at 0.5 A g−1 after 100 cycles and extraordinary rate performance (907.6 mAh g−1 with a coulombic efficiency of 99.2 % at 2 A g−1). The facile synthesis method and excellent findings have led to better application prospects for Co3O4/RGO nanoparticles.

chemistry, multidisciplinary
Co3o4/Porous Carbon Nanofibers Composite As Anode for High-Performance Lithium Ion Batteries with Improved Cycle Performance and Lithium Storage Capacity

Hongxun Yang,Yang Wang,Yu Nie,Shengnan Sun,Tongyi Yang

DOI: https://doi.org/10.1177/0021998316644856

IF: 3.191

2016-01-01

Journal of Composite Materials

Abstract:Co3O4 is a promising candidate as an anode material for the next generation lithium ion batteries because of its high theoretical storage capacity and energy density. However, the disadvantages of poor capacity retention caused by large volume changes during cycling and low rate capability due to its poor electronic conductivity frustrate its practical applications. We have developed a binary nanocomposite based on Co3O4 and porous carbon nanofibers synthesized via an electrospinning method followed by thermal treatment. As an anode for lithium ion batteries, the Co3O4/ porous carbon nanofibers composite exhibits a remarkably improved electrochemical performance in terms of lithium storage capacity (869.5 mAh g−1 at 0.1 C), high-initial Coulombic efficiency (73.8%), cycling stability (94.9% capacity retention at 50 cycles), and rate capability (403.6 mAh g−1 at 2 C at 25 cycles) compared to pure Co3O4. This improvement is attributed to the introduction of porous carbon nanofibers which could improve electrical conductivity of material and accommodate the volume expansion/contraction of Co3O4 nanoparticles during cycling.
Electrochemical performances of nano-Co 3O 4 with different morphologies as anode materials for Li-ion batteries

Dawei Zhang,Aniu Qian,Jingjuan Chen,Jianwu Wen,Long Wang,Chunhua Chen

DOI: https://doi.org/10.1007/s11581-011-0659-7

IF: 2.961

2012-01-01

Ionics

Abstract:Three kinds of Co 3O 4 nanomaterials with different morphologies were synthesized controllably by a post-anneal-assisted hydrothermal method in this study. X-ray diffraction and scanning electron microscopy indicated that all three kinds of samples were pure cubic phase of Co 3O 4 with morphologies of nanorods, nanoclusters, and nanoplates. Moreover, the transmission electron microscopy (TEM) and high-resolution TEM showed that the Co 3O 4 nanorods were bamboo-like and highly crystalline structures. When these materials were applied to the lithium-ion batteries (LIBs) as anode materials, the Co 3O 4 of nanorods demonstrated the best performance. It has a stable reversible capacity of 954 mAh g -1 as the anode of a LIB, much higher than the other two kinds of Co 3O 4 of rod-like nanoclusters and nanoplates, even after 35 cycles. All results showed that the morphology and microstructure take very important roles in the performance of Co 3O 4 as the anode materials in LIBs. © 2012 Springer-Verlag.
Low Temperature Synthesis of NiO/Co3O4 Composite Nanosheets As High Performance Li-ion Battery Anode Materials

QingQin Liang,YueMing Li,JingHong Li

DOI: https://doi.org/10.1007/s11434-012-5290-0

2012-01-01

Abstract:NiO/Co3O4 composite nanosheets have been synthesized via a facile method at low temperature for the first time.The as prepared materials were characterized by X-ray powder diffraction（XRD） and transmission electron microscopy（TEM）,and the performance of Li-ion batteries（LIBs） as anode materials were also studied.By controlling the atom ratio of Ni:Co,not only the size of the nanosheets can be controlled,the electrode’s conductivity and stability could also be greatly improved.The composite material showed a stable capacity retention during cycling（87% of the second capacity was retained after 15 cycles） even at a relatively large current rate（400 mA/g）.The NiO/Co3O4 nanosheet might be promising candidate anode materials in high performance Li-ion batteries.
MOF-derived CoFe2O4/FeO/Fe nanocomposites as anode materials for high-performance lithium-ion batteries

Xiao-Nan Lv,Peng-Fei Wang,Yu-Hang Zhang,Qi Shi,Fa-Nian Shi

DOI: https://doi.org/10.1016/j.jallcom.2022.166316

IF: 6.2

2022-11-25

Journal of Alloys and Compounds

Abstract:Due to the high theoretical capacity and low cost, iron-based oxides are considered to be valuable anode materials for lithium-ion batteries (LIBs) with applications. Its nanoscale design can effectively overcome the disadvantages of volume expansion and slow ion/electron transport rate. In this study, CoFe2O4/FeO/Fe three-phase composite nanospheres with ~10 nm diameter were prepared by high-temperature roasting using Co-Fe MOF as the precursor. By adjusting the synthesis temperature, the ratio of each phase was changed and their electrochemical properties were investigated. Due to the synergistic effect of the multivalent states of iron, composites with optimal ratios (Fe-Co-700) can obtain capacities exceeding the theoretical limits (1129.8 mAh g−1 at 0.1 A g−1). Even at 2 A g−1 high current test, nanocomposites still show excellent properties (capacity of 1120.2 mAh g−1 after 500 cycles). In addition, the results show that the content of CoFe2O4 contributes significantly to the capacity, while the content of Fe has a positive effect on the electrical conductivity. According to the test of galvanostatic intermittent titration technique (GITT), the Li+ diffusion coefficient of Fe-Co-700 composite is larger than that of materials calcined at other temperatures. These excellent properties demonstrate the positive significance of phase ratio tuning of microstructures for the design of future energy storage materials.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Co3O4/nitrogen-doped carbon nanoparticles for high-performance Li/Na-ion batteries

Rui Li,Long Qing,Wei Zhao,Yan kang Wu,Jian Chen,Wei Su

DOI: https://doi.org/10.1007/s11581-021-04424-z

IF: 2.961

2022-04-07

Ionics

Abstract:Co3O4 has been widely studied for its high theoretical specific capacity. However, its low electronic conductivity and large volume expansion during cycles of insertion/extraction of lithium and sodium are limitations to its practical applications. Herein, Co3O4 nanoparticles loaded onto carbon layers have been designed and investigated for Li/Na-ion batteries' applications. Nitrogen-doped high structurally connected carbon nanospheres loaded with Co3O4 nanoparticles (Co3O4/N-CNS) were synthesized through hydrothermal method, followed by calcination. Nitrogen element was successfully introduced through urea. As an anode for LIBs, Co3O4/N-CNS delivered a good reversible capacity of 740 mAh g−1 after 150 cycles at 0.2 A g−1. As an anode for SIBs, Co3O4/N-CNS displayed an attractive rate performance (191 mAh g−1 at 1 A g−1) and long cycle performance (331 mAh g−1 after 100 cycles at 0.1 A g−1). Therefore, Co3O4/N-CNS is a promising nanocomposite bifunctional anode material for high-performance LIBs and SIBs.

chemistry, physical,physics, condensed matter,electrochemistry
Synthesis of Co/Co3O4 Nanoparticles Embedded in Porous Carbon Nanofibers for High Performance Lithium-Ion Battery Anodes

Huiqing Qiu,Yu Wang,Yanyan Liu,Daohao Li,Xiaoyi Zhu,Quan Ji,Fengyu Quan,Yanzhi Xia

DOI: https://doi.org/10.1007/s10934-016-0290-0

2016-01-01

Journal of Porous Materials

Abstract:Co/Co3O4-carbon nanofibers (Co/Co3O4-CNFs) with porous structure were prepared using pyrolysis electrospinning cobalt alginate nanofibers (CoA-NFs) derived from brown algae as the raw material. The phase structure and morphology were analyzed by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results indicate Co/Co3O4 nanoparticles with a diameter of about 30–50 nm were embedded in the carbon nanofibers. As anode material for lithium-ion battery (LIBs), the Co/Co3O4-CNFs exhibited a high reversible capacity of 720 mAh g−1, excellent stability (i.e. 710 mAh g−1 at 0.5 C over 100 cycles) and good rate performance (310 mAh g−1 at a rate of 5 C).
Solution combustion synthesis of a nanometer-scale Co 3 O 4 anode material for Li-ion batteries

Monika Michalska,Huajun Xu,Qingmin Shan,Shiqiang Zhang,Yohan Dall'Agnese,Yu Gao,Amrita Jain,Marcin Krajewski

DOI: https://doi.org/10.3762/bjnano.12.34

IF: 3.1

2021-05-10

Beilstein Journal of Nanotechnology

Abstract:A novel solution combustion synthesis of nanoscale spinel-structured Co 3 O 4 powder was proposed in this work. The obtained material was composed of loosely arranged nanoparticles whose average diameter was about 36 nm. The as-prepared cobalt oxide powder was also tested as the anode material for Li-ion batteries and revealed specific capacities of 1060 and 533 mAh·g −1 after 100 cycles at charge–discharge current densities of 100 and 500 mA·g −1 , respectively. Moreover, electrochemical measurements indicate that even though the synthesized nanomaterial possesses a low active surface area, it exhibits a relatively high specific capacity measured at 100 mA·g −1 after 100 cycles and a quite good rate capability at current densities between 50 and 5000 mA·g −1 .

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Study of MOF‐derived Double Hemispherical Nano‐Co3O4/C Composite as Anode Material for Lithium‐Ion Batteries

Liming Wu,Yan‐gai Liu,Hang Zhao,Yujie Zhang,Zekun Wang,Xi Zhang,Bing Zhu,Peijie He,Yicen Liu

DOI: https://doi.org/10.1002/slct.202304973

2024-03-08

ChemistrySelect

Abstract:Explore the potential of Co3O4 as a promising anode material for next‐gen lithium‐ion batteries. Uncover the challenges hindering its widespread use and delve into our groundbreaking study introducing a novel, straightforward method to synthesize double hemispherical nano‐Co3O4/C composite materials. Discover how this innovative approach overcomes hurdles, resulting in exceptional electrochemical performance with high reversible cycle capacity, exemplary rate capability, and outstanding long‐cycle stability. Co3O4 emerges as a promising substitute in the field of anode electrode materials for the next‐generation of lithium‐ion batteries (LIBs). Nevertheless, challenges such as volumetric effects during cycling and insufficient conductivity have resulted in its subpar cycle stability, which impedes its practical application. In this study, we successfully employed a straightforward method to design and synthesize double hemispherical nano‐Co3O4/C composite materials derived from MOF‐74(Co). Benefiting from its nano‐porous structure combined with carbon materials, the resulting Co3O4/C electrode manifests outstanding electrochemical performance. Specifically, the obtained Co3O4/C electrode exhibits a notably high reversible cycle capacity (1151.9 mAh g−1 at 0.2 A g−1), exemplary rate capability, and outstanding long‐cycle performance (maintaining a capacity of 366.2 mAh g−1 at 1 A g−1 after 1400 cycles). This research introduces a novel approach for the development of innovative anode materials for LIBs.

chemistry, multidisciplinary
Composites of Porous Co3O4 Grown on Li2MnO3 Microspheres As Cathode Materials for Lithium Ion Batteries

Faxing Wang,Zheng Chang,Xiaowei Wang,Yanfang Wang,Binwei Chen,Yusong Zhu,Yuping Wu

DOI: https://doi.org/10.1039/c4ta06309k

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:The “synergistic effect” between the core (Li2MnO3microspheres) and shell (porous Co3O4) decreases the initial irreversible capacity and could eliminate the oxygen emission of Li2MnO3.

Co 3 O 4 and its composites for high-performance Li-ion batteries

Recent Development of Co3o4 and Its Composites As Anode Materials of Lithium-Ion Batteries

High performance of Co 3 O 4 @carbon composites as anodes for Lithium‐ion batteries

Co3O4@graphene Composites As Anode Materials for High-Performance Lithium Ion Batteries.

Co3O4/LaCoO3 nanocomposites derived from MOFs as anodes for high-performance lithium-ion batteries

Porous Polyhedral and Fusiform Co3O4 Anode Materials for High-Performance Lithium-Ion Batteries

Fe3O4/C Composites Synthesized from Fe-based Xerogels for Anode Materials of Li-ion Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Introducing heteroatoms, oxygen vacancies and heterostructures in Co 3 O 4 wrapped in carbon nanofibers by low-temperature vulcanization for lithium-ion storage

Metal organic framework derived Co3O4/Co@N–C composite as high-performance anode material for lithium-ion batteries

Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

Co3O4/RGO Nanoparticles Fabricated by Facile Solvothermal Method as an Anode Material for High‐Performance Lithium‐Ion Batteries

Co3o4/Porous Carbon Nanofibers Composite As Anode for High-Performance Lithium Ion Batteries with Improved Cycle Performance and Lithium Storage Capacity

Electrochemical performances of nano-Co 3O 4 with different morphologies as anode materials for Li-ion batteries

Low Temperature Synthesis of NiO/Co3O4 Composite Nanosheets As High Performance Li-ion Battery Anode Materials

MOF-derived CoFe2O4/FeO/Fe nanocomposites as anode materials for high-performance lithium-ion batteries

Co3O4/nitrogen-doped carbon nanoparticles for high-performance Li/Na-ion batteries

Synthesis of Co/Co3O4 Nanoparticles Embedded in Porous Carbon Nanofibers for High Performance Lithium-Ion Battery Anodes

Solution combustion synthesis of a nanometer-scale Co 3 O 4 anode material for Li-ion batteries

Study of MOF‐derived Double Hemispherical Nano‐Co3O4/C Composite as Anode Material for Lithium‐Ion Batteries

Composites of Porous Co3O4 Grown on Li2MnO3 Microspheres As Cathode Materials for Lithium Ion Batteries