Abstract:With high reversible capacities of more than 200 mAh/g, Ni-rich layered oxides Li[NixCoyMn1−x−y]O2 (x ≥ 0.6) serve as the most promising cathode materials for lithium-ion batteries (LIBs). However, the anisotropic lattice volume changes linked to their α-NaFeO2 structured crystal grains bring about poor cycle performances for conventionally produced NCM materials. To deal with these issue, single-crystal pm-sized LiNi0.8Co0.1Mn0.1O2 rods was synthesized by a hydrothermal method. Compared with conventional synthesis methods, these LiNi0.8Co0.1Mn0.1O2 rods were calcined at a low temperature with excessive lithium sources, which not only reduces the sintering temperature but also ensures the mono-dispersed micrometer-scaled particle distribution. When used as the cathode material for LIBs, the as-prepared LiNi0.8Co0.1Mn0.1O2, with ordered layered-structure and low degree of cation mixing, shows excellent electrochemical performances. When sintered at 750 °C with 50% Li-excess, the cathode material delivered an initial discharge capacity of 226.9 mAh/g with Coulombic efficiency of 91.2% at 0.1 C (1 C = 200 mA/g) in the voltage range of 2.8–4.3 V. When charge-discharged at 1 C for 100 cycles, discharge capacity of 178.1 mAh/g with the capacity retention of 95.1% are still obtained. The cycling stability at high cut-off voltage is also outstanding. These superior electrochemical properties should be related to the monodispersed micron scaled morphology which not only decreases the contact area between electrode and electrolyte but also mitigates the formation of microcracks. This low-temperature strategy of synthesizing single-crystal LiNi0.8Co0.1Mn0.1O2 rods should be able to provide a feasible method for synthesizing other single-crystal Ni-rich cathode materials with excellent electrochemical performances for LIB.

Low Temperature Synthesis of NiO/Co3O4 Composite Nanosheets As High Performance Li-ion Battery Anode Materials

Porous Znco2o4 Nanowires Synthesis Via Sacrificial Templates: High-Performance Anode Materials Of Li-Ion Batteries

Low-Temperature Metal-Catalysed Synthesis of Metal Oxide Nanoparticles Encapsulated and Nitrogen-doped Carbon Nanotubes from Carbon Nitride as Anodic Materials of High-Performance Lithium-Ion Batteries

Nanostructured NiO/C composite for lithium-ion battery anode.

Electrochemical performances of NiO/Ni2N nanocomposite thin film as anode material for lithium ion batteries

High-performance of LaCoO3/Co3O4 Nanocrystal As Anode for Lithium-Ion Batteries

Facile Synthesis of Cuo-Nio Nanocomposites with High Surface Areas and Their Application for Lithium-Ion Batteries

Electrochemical energy storage of NiO/NiFe2O4 nanosheets derived from Ni-Fe layered double hydroxides

Facile Fabrication of Porous Nixco3-Xo4 Nanosheets with Enhanced Electrochemical Performance As Anode Materials for Li-Ion Batteries

A Novel NiCoMnO4 Anode Material: Construction of Nanosheet Architecture and Superior Electrochemical Performances

Oxalate-derived porous prismatic nickel/nickel oxide nanocomposites toward lithium-ion battery

Controllable Synthesis of Nanostructured ZnCo2O4 As High-Performance Anode Materials for Lithium-Ion Batteries

Three-dimension Hierarchical Flower-Like Ni1.5Co1.5O4 Nanostructures Composed of Two-Dimension Ultrathin Nanosheets As an Anode Material for Lithium Ion Batteries

High Performance Co3O4/Li2TiO3 Composite Hollow Nanofibers As Anode Material for Li-ion Batteries

Coo Nanosheets Derived from Electrodeposited Cobalt Metal Towards High Performance Lithium Ion Batteries

Low-temperature strategy to synthesize single-crystal LiNi0.8Co0.1Mn0.1O2 with enhanced cycling performances as cathode material for lithium-ion batteries

Facile Synthesis of Single-Crystalline Mesoporous Nio Nanosheets As High-Performance Anode Materials for Li-Ion Batteries

Nickel–cobalt oxides/carbon nanoflakes as anode materials for lithium-ion batteries

Large-scale Synthesis of NiO Polyhedron Nanocrystals As High-Performance Anode Materials for Lithium Ion Batteries

Simple Hydrothermal Synthesis of HCNFs@CoNiO2 Composite Material for High-Performance Anode of Lithium-Ion Batteries

High Electrochemical Performance of Monodisperse Nico2o4 Mesoporous Microspheres As an Anode Material for Li-Ion Batteries