Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

Sorption-enhanced Methanol Steam Reforming for Hydrogen Production by Combined Copper-Based Catalysts with Hydrotalcites

The Characteristics of A Sorption-Enhanced Steam-Methane Reaction for the Production of Hydrogen Using Co2 Sorbent

The Characteristics of Sorption Enhanced Steam Methane Reforming for Hydrogen Production on a Complex Catalyst

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Sorption-Enhanced Steam Reforming of Ethanol on a Novel K–Ni–Cu–Hydrotalcite Hybrid Material

Steam Methane Reforming Reaction Enhanced by a Novel K2CO3-Doped Li4SiO4 Sorbent: Investigations on the Sorbent and Catalyst Coupling Behaviors and Sorbent Regeneration Strategy

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Syntheses, catalytic performances and DFT investigations: A recent review of copper-based catalysts of methanol steam reforming for hydrogen production

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Non-syngas Direct Steam Reforming of Methanol to Hydrogen and Carbon Dioxide at Low Temperature

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

The Cu-Al2O3 Interface: an Unignorable Active Site for Methanol Steam Reforming Hydrogen Production

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

Hydrogen production via steam reforming of methanol using Cu/ZnO/Al 2 O 3 : Effect of catalyst synthesis method and Cu to Zn molar ratio on physico-chemical properties and catalytic performance

Highly Effective Hydrogen Production From Steam Reforming Of Methanol Over Sba-15-Modified Cu/Zno/Al2o3 Catalysts

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

High-purity hydrogen production by sorption-enhanced methanol steam reforming over a combination of Cu–Zn–CeO2–ZrO2/MCM-41 catalyst and (Li–Na–K) NO3·MgO adsorbent