Design and Test of Voltage and Current Probes for EAST ICRF Antenna Impedance Measurement

Jianhua Wang,Gen Chen,Yanping Zhao,Yuzhou Mao,Shuai Yuan,Xinjun Zhang,Hua Yang,Chengming Qin,Yan Cheng,Yuqing Yang,Guillaume Urbanczyk,Lunan Liu,Jian Cheng

DOI: https://doi.org/10.1088/2058-6272/aaa7ea

2018-01-01

Plasma Science and Technology

Abstract:On the experimental advanced superconducting tokamak (EAST), a pair of voltage and current probes (V/I probes) is installed on the ion cyclotron radio frequency transmission lines to measure the antenna input impedance, and supplement the conventional measurement technique based on voltage probe arrays. The coupling coefficients of V/I probes are sensitive to their sizes and installing locations, thus they should be determined properly to match the measurement range of data acquisition card. The V/I probes are tested in a testing platform at low power with various artificial loads. The testing results show that the deviation of coupling resistance is small for loads R-L > 2.5 Omega, while the resistance deviations appear large for loads R-L < 1.5 Omega, which implies that the power loss cannot be neglected at high VSWR. As the factors that give rise to the deviation of coupling resistance calculation, the phase measurement error is the more significant factor leads to deleterious results rather than the amplitude measurement error. To exclude the possible ingredients that may lead to phase measurement error, the phase detector can be calibrated in steady L-mode scenario and then use the calibrated data for calculation under H-mode cases in EAST experiments.