Abstract:The DeNOX efficiency of the Selective Catalyst Reduction (SCR) system relates closely to the urea injection, and the starting injection time of urea injection depends on the exhaust gas temperature. For the diesel vehicle driving on real roads, the exhaust gas temperatures change significantly. At high temperatures, the SCR system actively injects urea; whereas at low temperatures, no urea injection happens and the catalyst reaction relies solely on the stored ammonia in the catalytic container. Thus, it is important to investigate the SCR DeNOX efficiency under condition of different temperature ranging from low to high temperature. In this paper, a heavy-duty diesel vehicle was tested under stationary idling condition with first rapid acceleration, then high-speed holding running and finally deceleration, and the NOX emission performance at various exhaust temperatures was acquired under two distinct operating conditions: active injection of ammonia at higher temperatures and no ammonia injection at lower temperatures. Furthermore, a deep learning model was built for predicting NOX downstream of the SCR by utilizing exhaust flow rate, average exhaust temperature, and NOX emission concentration upstream of the SCR as input parameters, and this model was verified with a model fit of 0.98. The results show that the SCR DeNOX efficiency achieves 99 % with active urea injection during high-temperature stages, and 30–40 % during low-temperature stages, relying on ammonia storage. During the ammonia storage stage, the SCR DeNOX efficiency exhibits high sensitivity to temperature, with a rate of decreases of 1.3 %/°C per unit temperature. In the active ammonia injection stage, the SCR DeNOX efficiency decreases at a rate of 0.5 %/°C per unit temperature. Various reaction stages exhibit a significant relationship between SCR DeNOX efficiency and exhaust temperature.

Development of A 1d Urea-Scr System Model Coupling with Wall Film Decomposition Mechanism Based on Engine Bench Test Data

Quasi 1D Modeling of Two-Phase Flow and Deposit Formation for Urea-Selective Catalytic Reduction Systems

Influence of Urea-SCR System Parameters on NOx Conversion Rate and Liquid Film

Modelling of Urea-SCR Exhaust Aftertreatment System for Diesel

Model-Based Two-Stage SCR Urea Injection Strategy for Diesel Engine to Meet Low NOX Emission Regulation

Study on Decomposition and By-Products Formation Mechanism of Urea Solution Impinging on Heated Plate in SCR System.

Modeling and Numerical Simulation of Diesel Engine SCR Deposit

Numerical Simulation of Urea Aqueous Solution Injection Process in A Selective Catalytic Reduction System

Numerical Simulation to Reduce NOx of Diesel Engine Urea-SCR System

Modeling and simulation of SCR system for diesel engines

Numerical Investigation on the Urea Deposit Formation Process in a Selective Catalytic Reduction System of a Diesel Engine Based on a Fluid–Solid Coupling Method

A temporal discretization and spatial integration SCR model with dual temperature-related parameters

Influence of Operating Conditions on Urea Deposit Formation in the Urea-SCR System on a Diesel Engine Exhaust-like Test Bench

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Experimental and Numerical Analysis of NOx Reduction in Marine Urea-Scr System

A NOx Emission Model Incorporating Temperature for Heavy-Duty Diesel Vehicles with Urea-SCR Systems Based on Field Operating Modes

Effects of key operating parameters on SCR performance of diesel engines

Effect of urea thermal decomposition on diesel NOx-SCR aftertreatment systems

Study of Reducing Deposits Formation in the Urea-Scr System: Mechanism of Urea Decomposition and Assessment of Influential Parameters

Experimental Study of SCR DeNOX Efficiency at Low Exhaust Gas Temperatures