Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Variation of mechanical properties of granite after high-temperature treatment

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment

Thermal damage pattern and thresholds of granite

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

Porosity and wave velocity evolution of granite after high-temperature treatment: a review

Thermal Damage and Acoustic Emission Characteristics of Granite Based on Brazilian Splitting Test

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Experimental Study on Damage and Fracture Characteristics of Beishan Granite Subjected to High-temperature Treatment with DIC and AE Techniques

Tensile Properties and Damage Evolution Laws of Granite After High- and Low-Temperature Cycles

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Experimental investigation on physical and tensile mechanical properties of granite after different heating/cooling treatments

Variation on Thermal Damage Rate of Granite Specimen with Thermal Cycle Treatment

Mechanical properties of granite at high temperature subjected to true triaxial compression

Effects of Heating on Some Physical Properties of Granite, Shandong, China