Abstract:The theory of reciprocal screws plays an important role in the kinematics and statics analysis of robot manipulators. Thus, efficient algorithms are usually required to identify the reciprocal screw system in closed-form. Inspired by the spatial stiffness/compliance, this paper presents a new approach for the identification of reciprocal screw system for any given one. The concept of symmetric screw matrix is introduced to uniformly represent the screw systems with 6 x 6 symmetric positive semidefinite matrices. By means of the change of coordinates and the recombination of base elements, any screw system can be decomposed into the direct sum of a general subsystem and a special one, which comprise only finite- and infinite-pitch elements belonging to the original system, respectively. Hence, for an arbitrary screw system, the corresponding reciprocal system can be achieved as the direct sum of those reciprocal to its subsystems. In the proposed framework, the decomposed subsystems can be uniquely identified by a diagonal and a symmetric 3 x 3 matrices, respectively, with respect to a particular choice of coordinate frame. Based on the theory of orthogonal complement spaces, the reciprocal subsystems can then be obtained in a straightforward manner with intuitive geometric interpretation. To verify the effectiveness of the proposed method in the kinematics analysis of limited degree-of-freedom (DOF) parallel manipulators, several typical candidates are investigated as examples. In all these examples, the screw systems can be identified in closed-form and the instantaneous kinematics can be characterized according to the properties of the obtained subsystems. (C) 2017 Elsevier Ltd. All rights reserved.

Identification of Canonical Basis of Screw Systems Using General-Special Decomposition

A New Approach for the Identification of Reciprocal Screw Systems and Its Application to the Kinematics Analysis of Limited-Dof Parallel Manipulators

Identification of Principal Screws of Two- and Three-Screw Systems

Non-Inertial Dynamic Analysis of 3-SPS/U Parallel Platform by Screw Theory and Kane’s Method

An Algebraic Methodology to Identify the Principal Screws and Pitches of Screw Systems

Geometrical Method to Determine the Reciprocal Screws and Applications to Parallel Manipulators

Polynomial Invariants and SAGBI Bases for Multi-screws

Computation of the configuration degree of freedom of a spatial parallel mechanism by using reciprocal screw theory

The Kinematics Analysis of A Novel Self-Reconfigurable Modular Robot Based on Screw Theory

Inverse kinematics sub-problem solution algorithm for serial robot based on screw theory

The theory of screws derived from a module over the dual numbers

Analysis of 2-DOF Parallel Mechanisms Based on Screw Theory

A repelling-screw-based approach for the construction of generalized Jacobian matrices for nonredundant parallel manipulators

Screw Statics of Spatial Structures and Mechanisms

Formalizing Screw Theory with 3D Geometric Algebra

A New Method to Study the Degree of Freedom of Spatial Parallel Mechanisms

Repelling-screw-based geometrical interpretation of dualities of compliant mechanisms

An approach for mobility and force/motion transmissibility analysis of parallel mechanisms based on screw theory and CAD technology

Analyzing Higher-Order Curvature of Four-Bar Linkages with Derivatives of Screws

General-Linear-Complex Singularity Analysis of 3/6-SPS Stewart Parallel Manipulator

Kinematics and Dynamics Analysis of a 3UPS-UPU-S Parallel Mechanism