Abstract:The theory of reciprocal screws plays an important role in the kinematics and statics analysis of robot manipulators. Thus, efficient algorithms are usually required to identify the reciprocal screw system in closed-form. Inspired by the spatial stiffness/compliance, this paper presents a new approach for the identification of reciprocal screw system for any given one. The concept of symmetric screw matrix is introduced to uniformly represent the screw systems with 6 x 6 symmetric positive semidefinite matrices. By means of the change of coordinates and the recombination of base elements, any screw system can be decomposed into the direct sum of a general subsystem and a special one, which comprise only finite- and infinite-pitch elements belonging to the original system, respectively. Hence, for an arbitrary screw system, the corresponding reciprocal system can be achieved as the direct sum of those reciprocal to its subsystems. In the proposed framework, the decomposed subsystems can be uniquely identified by a diagonal and a symmetric 3 x 3 matrices, respectively, with respect to a particular choice of coordinate frame. Based on the theory of orthogonal complement spaces, the reciprocal subsystems can then be obtained in a straightforward manner with intuitive geometric interpretation. To verify the effectiveness of the proposed method in the kinematics analysis of limited degree-of-freedom (DOF) parallel manipulators, several typical candidates are investigated as examples. In all these examples, the screw systems can be identified in closed-form and the instantaneous kinematics can be characterized according to the properties of the obtained subsystems. (C) 2017 Elsevier Ltd. All rights reserved.

Computation of the configuration degree of freedom of a spatial parallel mechanism by using reciprocal screw theory

Re-Analysis of the Degree-Of-Freedom Configuration of the Platforms in Spatial Parallel Mechanisms with Constraints Spaces

A New Method to Study the Degree of Freedom of Spatial Parallel Mechanisms

Analysis of 2-DOF Parallel Mechanisms Based on Screw Theory

A New Approach for the Identification of Reciprocal Screw Systems and Its Application to the Kinematics Analysis of Limited-Dof Parallel Manipulators

Position Analysis and Research of Reachable Workspace of 3-CRS/SP Parallel Mechanism

The Kinematics Study of a Class of Spatial Parallel Mechanism with Fewer Degrees of Freedom

Kinematics Simulation of 5-DOF Parallel Mechanisms

Inverse kinematics sub-problem solution algorithm for serial robot based on screw theory

Geometrical Method to Determine the Reciprocal Screws and Applications to Parallel Manipulators

Degree of Freedom and Position Analysis of 3-RPRR Spatial Parallel Mechanism

Motion Characteristics of a Robotic Mechanism

Design and DOF Analysis of a Novel Compliant Parallel Mechanism for Large Load

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

An approach for mobility and force/motion transmissibility analysis of parallel mechanisms based on screw theory and CAD technology

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Complete Kinematics/Dynamics Modeling and Performance Analysis of a Novel SCARA Parallel Manipulator Based on Screw Theory

Mobility Analysis of the 3-Upu Parallel Mechanism Based on Screw Theory

Research on a new method for the degree of freedom analysis of parallel mechanism

On the workspace of spatial parallel manipulator with multi-translational degrees of freedom

Analysis And Control For A New Reconfigurable Parallel Mechanism