Abstract:In order to evaluate the prediction error resulting from using average state variables in the calibration procedure of the ductile fracture criterion, a series of experiments and corresponding simulations were performed to extract the evolution of fracture-related state variables such as stress triaxiality (η), Lode parameter, and equivalent strain to fracture at the fracture initiation points. The average stress triaxiality, average Lode parameter, and equivalent strain to fracture were used to calibrate the Lou-Huh (L-H) ductile fracture criterion. The average induced prediction error was evaluated by comparing the accumulated damage value, which was computed with the calibrated L-H ductile fracture criterion at the fracture initiation point, with the critical threshold value. Comparisons based on a series of experiments covering a wide range of values for stress triaxiality indicated the existence of an average induced prediction error for the compression tests, and demonstrated that different values of embedded-constants C1 and C2 of L-H ductile fracture criterion resulted in entirely different average induced prediction errors. Thus, a parameter study was performed to investigate the influences of C1, C2, the relationship of η and equivalent plastic strain ([Formula: see text]), and the internal function of the integral formula on the average induced relative error. The influence of the relationship of [Formula: see text] could be represented by the influence of the exponent a, the intercept for the stress triaxiality, and the allocation of equivalent strain for the segmented function. Among these influence factors, the value of C2, the value of the exponent a, and the value of the negative intercept for stress triaxiality contributed significantly to an increase in relative error.

Parameter Calibration of Ductile Fracture Criterion Considering Computational Efficiency and Accuracy

Three calibration methods for ductile fracture criterion parameters

Calibration and Application of Ductile Fracture Criterion under Non-Proportional Loading Condition

Evaluation of Prediction Error Resulting from Using Average State Variables in the Calibration of Ductile Fracture Criterion

A Novel Machine-Learning Based Framework for Calibrating Micromechanical Fracture Model of Ultra-Low Cycle Fatigue in Steel Structures

Calibration procedures for a computational model of ductile fracture

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Numerical calibration for fracture parameters of three-point bending semi-circular specimens

An Improved Method for Calibration of Beremin Model Parameters

Research on the ductile fracture criterion in plastic deformation processes

A direct analytical methodology for the assessment of ductile fracture in metals based on multiaxial tests

A Shear Ductile Fracture Criterion for Metal Forming

Simulation of Ductile Fracture in an Aluminum Alloy Using Various Criteria

Research on parameter identification of fracture model for titanium alloy under wide stress triaxiality based on machine learning

Establishment and Verification of Two-Component Ductile Fracture Criteria with High Estimation Accuracy

Ductile Fracture Modeling of Initiation and Propagation in Sheet-Metal Blanking Processes

Test-and-FE-based method for obtaining complete stress-strain curves of structural steels including fracture

Experimental and Theoretical Research on Ductile Fracture Criterion

Numerical Simulation and Experimental Verification of Ductile Fracture Criteria of Metals

Ductile Fracture Prediction Based on J-integral and Unified Constraint Parameters for Cracked Pipes

Calibration of micromechanical fracture model parameters for Q355B steel and ER50–6 welds