Abstract:Gasification of biomass waste is considered as a green and sustainable solution to reduce waste volumes and recover energy by producing syngas. In this study, both experiment and simulation have been conducted to understand the various physical and chemical effects in a fixed bed downdraft gasifier and to provide researchers with a tool to overcome the need to conduct cost intensive experiments for predicting and optimizing energy efficiencies. A combined transient single particle and fuel-bed model is developed to describe the entire packed bed in the flow direction of primary air and intraparticle phenomena. The reactor is discretized and in each cell one representative particle is chosen to be modelled as shrinking sphere. The reactor was divided into three regions due to the difference of air velocity in each region: natural convection region, mixed convection region and forced convection region. Sensitivity analysis has been conducted to determine the boundary location of each region. The presented model considers drying, pyrolysis, homogeneous gas reactions, and heterogeneous combustion/gasification reactions. In the gas phase eight species (O2, N2, CO, CO2, H2, H2O, CH4 and tar) are considered. The solid phase is biomass waste, in which all the components obtained from approximate analysis (moisture, volatiles, fixed carbon and ash) and ultimate analysis (C, H, O, N) are treated as dependent variables of time and space. This model can predict production rate and quality of both synthetic gas and produced char from gasifier reactor. The optimized biomass properties, equivalence ratio and air inlet location for maximum energy efficiency can also be obtained from this model. Experiments have been conducted to investigate the effects of different parameters on gasification performance, such as biomass moisture content, particle size and shape, equivalence ratio, etc. The experimental results are also used to validate against simulation results and the deviation between the numerical and experimental results obtained in this study is lower than 10%.

The Development of a Real-Time Thermogravimetric Analyzer on the Gasification of Pine Sawdust in a Simulated Fluidized Bed Gasifier

Tg-Ftir And Py-Gc/Ms Analysis On Pyrolysis And Combustion Of Pine Sawdust

KINETIC STUDY OF PINE SAWDUST PYROLYSIS VIA TG/DTG ANALYSIS

High-temperature gasification of woody biomass in a drop tube reactor: A special focus on the particle size and axial temperature gradient

Impact of torrefaction on entrained-flow gasification of pine sawdust: An experimental investigation

Experimental Study on Sawdust Air Gasification in an Entrained-Flow Reactor

Comparison of Gasification Performances Between Raw and Torrefied Biomasses in an Air-Blown Fluidized-Bed Gasifier

Thermogravimetric Analysis of Pyrolysis Characteristics of Biomass

Thermogravimetric and Kinetic Analysis of High-Temperature Thermal Conversion of Pine Wood Sawdust under CO2/Ar

Influence of Torrefaction on Biomass Gasification Performance in A High-Temperature Entrained-Flow Reactor

THE STUDY OF PINE SAWDUST STEAM CATALYTIC GASIFICATION TO PRODUCE HYDROGEN AND LARGE PARTICLE GASIFICATION KINETIC MODEL

Biomass Entrained Flow Gasification and Residue Behavior

Thermodynamic modeling modification and experimental validation of entrained-flow gasification of biomass

Characterization of Tar from Sawdust Gasified in the Pressurized Fluidized Bed

Pyrolysis of Pine Sawdust by TG-FTIR Analysis

Research on characteristics of wood pyrolysis and gasification in fluidized beds

Experimental Studies on Fast Pyrolysis of Pine Sawdust

Biomass Gasification in a Fixed Bed Downdraft Gasifier: Experimental Study and Comprehensive Reactor and Particle Modelling

Product Analysis and Thermodynamic Simulations from the Pyrolysis of Several Biomass Feedstocks

Decomposition and gasification of pyrolysis volatiles from pine wood through a bed of hot char

A two-stage circulated fluidized bed process to minimize tar generation of biomass gasification for fuel gas production