Abstract:In this work, we report that NiO thin film can be used as a back contact buffer layer in CdTe thin film solar cells. The NiO layer is prepared by electron beam evaporation. To optimize the thickness of the NiO thin film, we fabricate some CdTe solar cells with different NiO thickness values. A NiO/Au back contact CdTe solar cell with an efficiency of 12.17% and an open-circuit voltage Voc of 789 mV is obtained, which are comparable to those of a standard Cu/Au back contact solar cell. The X-ray photoelectron spectroscopy (XPS) is used to quantitatively characterize the band alignment at the CdTe/NiO interface. It can be seen from the band alignment that the valence band offset (EVBO) is 0.52 eV and the conduction band offset (ECBO) is 2.68 eV. The EVBO presents no energy barrier for hole to transport from CdTe to NiO. The value of ECBO indicates that NiO can act as a back surface field layer (BSF) to dramatically reduce carrier recombination in the contact region of a CdTe cell, leading to an improved Voc. The band alignment obtained from XPS measurement shows that the band alignments of NiO and CdTe are perfectly matched. However, the conductivity of NiO film is poor. The insertion of a NiO buffer layer in the back contact increases the series resistance and reduces the fill factor (FF). We propose to use Cu/NiO composite structure as a bi-layer contact to improve the conductivity of the NiO buffer layer, which at the same time can be used to dope the CdTe film surface by Cu to obtain a low resistive contact. We fabricate a cell with a contact structure of 3-nm-Cu/20-nm-NiO/Au and the cell has a Voc of 796 mV, a Jsc (short-circuit currrent) of 24.2 mA/cm2, an FF of 70.2% and an efficiency of 13.5%. In order to study the stability of the solar cell with a Cu/NiO/Au back contact, a thermal stressing test is carried out at a temperature of 80 ℃ in the air atmosphere. For the Cu/NiO/Au back contact structure solar cell, the efficiency decreases from 13.1% to 12.9% after the cell is stressed for 80 h, showing that the stability of the Cu/NiO/Au back contact cell is significantly improved compared with that of the standard Cu/Au contact cell. In summary, the experimental results obtained in this study demonstrate that NiO thin film is a promising buffer layer for manufacturing stable and high efficiency CdTe thin film solar cells.

CuTe Nanoparticles/Carbon Nanotubes as Back Contactfor CdTe Solar Cells

CdTe thin film solar cells with a SnTe buffer layer in back contact

The Effects of ZnTe:Cu Back Contact on the Performance of CdTe Nanocrystal Solar Cells with Inverted Structure.

The Influence of CdS Intermediate Layer on CdSe/CdS Co-Sensitized Free-Standing TiO2 Nanotube Solar Cells

Novel Cu Nanowires/Graphene As the Back Contact for Cdte Solar Cells

Enriched Semiconducting Single Wall Nanotubes As Back Contact for CdTe Solar Cell.

Performance Enhancement of Solar Cells Based on High Photoelectric Conversion Efficiency of H-Bn and Metal Nanoparticles.

Carbon-nanofibers Film As a Back-Contact Buffer Layer in CdTe Thin Film Solar Cell

A Study of Back Contacts of Cdte Thin Film. Solar Cells

Enhanced Performance of CdTe Solar Cells with Sb2Se3 Back Contacts

Cu-doped CdS and its application in CdTe thin film solar cell

Optimizing CdTe-metal interfaces for high performance solar cells

Back Contact Buffer Layer of WO3 Nanosheets in Thin-Film CdTe Solar Cell

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

Novel p-Type Conductive Semiconductor Nanocrystalline Film as the Back Electrode for High-Performance Thin Film Solar Cells

Nickel Oxide As Back Surface Field Buffer Layer in Cdte Thin Film Solar Cell

Effect of Cu2Te Back Surface Interfacial Layer on Cadmium Telluride Thin Film Solar Cell Performance from Numerical Analysis

Strategy for Performance Enhancement of Cd1-XZnXTe/CdS Core/shell Quantum Dot Sensitized Solar Cells Through Band Adjustment

Stable CdTe Solar Cell with V2O5 As a Back Contact Buffer Layer

Promoting Solution-Processed CdTe Nanocrystal Solar Cells Via Rationally Controlled Copper Doping

Copassivation of Polycrystalline CdTe Absorber by CuCl Thin Films for CdTe Solar Cells