Abstract:Because of the superiority in high theoretical capacity and environmental friendliness, SnO2 as an ideal anode material exhibits an application prospect in sodium-ion batteries. Nevertheless, its practical use is restricted by the poor electroconductivity and huge volume expansion. To solve these difficulties, a maneuverable and effective strategy is introduced to synthesis SnO2/C composites in this work. For the operation, the composites are prepared via a one-pot hydrothermal technique. For the effect, SnO2 particles disperse uniformly on the pitch-derived carbon matrix in nanometer size. The impacts of the pyrolysis temperature and SnO2 content are investigated in detail. It is surprising that the diameter of the SnO2 particle is ∼5 nm observed by high-resolution transmission electron microscopy, and the Sn–O–C bond exists, confirmed by X-ray photoelectron spectroscopy. In comparison to the carbonaceous substrate and pure SnO2, the composite shows higher storage capacity and greater cycle performance that SnO2/C-2 delivers a charge specific capacity of 311.8 mAh g–1 at 100 mA g–1 initially and a residual capacity of 144.2 mAh g–1 after 1000 cycles at 500 mA g–1. The remarkable electrochemical performance benefits from the nanosized SnO2 particles with high dispersion as well as the tight link between SnO2 and the carbon matrix.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00887?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00887</a>.SEM images of MTP and ACM (Figure S1), water contact angle of MTP and ACM (Figure S2), high-resolution XPS spectra of SnO2 powder (Figure S3), SEM images of the SnO2/C-2 electrode before and after 100 cycles (Figure S4), cycling performance of SnO2/C-2 at 0.5 A g–1 for 100 cycles (Figure S5), CV curves and charge/discharge curves of ACM-500 (Figure S6), and EIS spectra of the SnO2/C-2 anode before and after cycle (Figure S7) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00887/suppl_file/ef1c00887_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Three-Dimensional Porous Carbon Nanotube Papers as Current Collector and Buffer for SnO2 Anodes

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Three-Dimensional Carbon Nanotube/Transition-Metal Oxide Sponges as Composite Electrodes with Enhanced Electrochemical Performance

Amorphous SnO2 nanoparticles embedded into a three-dimensional porous carbon matrix as high-performance anodes for lithium-ion batteries

Porous SnO2 microsphere and its carbon nanotube hybrids: Controllable preparation, structures and electrochemical performances as anode materials

Synergistic Effect of 3D Electrode Architecture and In Situ Carbon Coating on the Electrochemical Performance of SnO2 Anodes for Sodium-Ion Batteries

Carbon Nanotubes Connecting and Encapsulating MoS2-Doped SnO2 Nanoparticles as an Excellent Lithium Storage Performance Anode Material

Uniform Nano-SnO 2 /C Composite Anodes from Coal Tar Pitch for Sodium-Ion Batteries

Hollow Porous CoSnO x Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers as Anode Material for High-Performance Lithium Storage

One-dimensional mesoporous Sn4P3@C nanofibers as superior anodes for sodium energy storage

In situ reduction and coating of SnS2 nanobelts for free-standing SnS@polypyrrole-nanobelt/carbon-nanotube paper electrodes with superior Li-ion storage

High-capacity and cycling-stable anode for sodium ion batteries constructed from SnS2/MWCNTs nanocomposites

Fast Energy Storage of SnS2 Anode Nanoconfined in Hollow Porous Carbon Nanofibers for Lithium‐Ion Batteries

Cross‐Stacked Carbon Nanotube Sheets Uniformly Loaded with SnO2 Nanoparticles: A Novel Binder‐Free and High‐Capacity Anode Material for Lithium‐Ion Batteries

Multi-Walled Carbon Nanotube Papers As Binder-Free Cathodes For Large Capacity And Reversible Non-Aqueous Li-O-2 Batteries

In Situ Growth of Mesoporous SnO2 on Multiwalled Carbon Nanotubes: A Novel Composite with Porous‐Tube Structure As Anode for Lithium Batteries

Freestanding carbon-coated CNT/Sn(O2) coaxial sponges with enhanced lithium-ion storage capability.

Flexible hybrid carbon nanotube sponges embedded with SnS2 from tubular nanosheaths to nanosheets as free-standing anodes for lithium-ion batteries

“Three‐in‐One” Multi‐Level Design of MoS 2 ‐Based Anodes for Enhanced Sodium Storage: from Atomic to Macroscopic Level