Abstract:In bone tissue engineering, polycaprolactone (PCL) is a promising material with good biocompatibility, but its poor degradation rate, mechanical strength, and osteogenic properties limit its application. In this study, we developed an Mg-1Ca/polycaprolactone (Mg-1Ca/PCL) composite scaffolds to overcome these limitations. We used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5, 10, and 20 wt%. Porous scaffolds with controlled macro- and microstructure were printed using the fused deposition modeling method. We explored the mechanical strength, biocompatibility, osteogenesis performance, and molecular mechanism of the Mg-1Ca/PCL composites. The 5 and 10 wt% Mg-1Ca/PCL composites were found to have good biocompatibility. Moreover, they promoted the mechanical strength, proliferation, adhesion, and osteogenic differentiation of human bone marrow stem cells (hBMSCs) of pure PCL. In vitro degradation experiments revealed that the composite material stably released Mg 2 + ions for a long period; it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and growth. Microcomputed tomography and histological analysis showed that both 5 and 10 wt% Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone defects. Our results indicated that the Wnt/ beta -catenin pathway was involved in the osteogenic effect. Therefore, Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical application. Statement of significance: Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone defects. However, there remain many limitations in the materials and manufacturing methods used to fabricate scaffolds. This study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation capabilities. Furthermore, the fused deposition modeling method allows precise control of the macroscopic morphology and microscopic porosity of the scaffold. The obtained porous scaffolds can significantly promote the regeneration of bone defects. (c) 2022 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University

In Vitro and In Vivo Characterization of Multi-Walled Carbon Nanotubes/Polycaprolactone Composite Scaffolds for Bone Tissue Engineering Applications

Multiwall Carbon Nanotubes/polycaprolactone Composites for Bone Tissue Engineering Application.

Electrospun Poly (Lactic-Co-glycolic Acid)/Multiwalled Carbon Nanotubes Composite Scaffolds for Guided Bone Tissue Regeneration

Carbon nanotubes-reinforced polylactic acid/hydroxyapatite porous scaffolds for bone tissue engineering

Preparation and Properties of Multi-Walled Carbon Nanotubes and Eggshell Dual-Modified Polycaprolactone Composite Scaffold

In vitro and in vivo biocompatibility of multi-walled carbon nanotube/biodegradable polymer nanocomposite for bone defects repair

Biomimetic Mineralization of Electrospun Poly (Lactic-Co-glycolic Acid)/Multi-Walled Carbon Nanotubes Composite Scaffolds in Vitro

The Application of Multi-Walled Carbon Nanotubes in Bone Tissue Repair Hybrid Scaffolds and the Effect on Cell Growth in Vitro.

Nanoclay mineral-reinforced macroporous nanocomposite scaffolds for in situ bone regeneration: In vitro and in vivo studies

Selective laser sintering fabrication of nano-hydroxyapatite/poly-ε-caprolactone scaffolds for bone tissue engineering applications

PCL-CNT nanocomposites for bone tissue engineering application

Early In Vivo Osteogenic and Inflammatory Response of 3D Printed Polycaprolactone/Carbon Nanotube/Hydroxyapatite/Tricalcium Phosphate Composite Scaffolds

The Development of Polylactic Acid/Multi-Wall Carbon Nanotubes/Polyethylene Glycol Scaffolds for Bone Tissue Regeneration Application

Fabrication and biocompatibility of nano non-stoichiometric apatite and poly(epsilon-caprolactone) composite scaffold by using prototyping controlled process

Incorporation of Carboxylation Multiwalled Carbon Nanotubes into Biodegradable Poly(lactic-Co-glycolic Acid) for Bone Tissue Engineering.

Carbon nanotube reinforced polyvinyl alcohol/biphasic calcium phosphate scaffold for bone tissue engineering

Robocasting nanocomposite scaffolds of poly(caprolactone)/hydroxyapatite incorporating modified carbon nanotubes for hard tissue reconstruction

Performance of 3D printed porous polyetheretherketone composite scaffolds combined with nano-hydroxyapatite/carbon fiber in bone tissue engineering: a biological evaluation

3D-Printed Mg-1Ca/polycaprolactone Composite Scaffolds with Promoted Bone Regeneration

Biomineralized poly (l-lactic-co-glycolic acid)-tussah silk fibroin nanofiber fabric with hierarchical architecture as a scaffold for bone tissue engineering

Enhanced Osteogenic Differentiation of Mesenchymal Stem Cells on Poly(L-Lactide) Nanofibrous Scaffolds Containing Carbon Nanomaterials