Abstract:Recently, metal-organic frameworks (MOFs) and their carbon derivates have been demonstrated as new electrode modifying materials for electrochemical sensing. In this work, the first example of the detection of heavy metal ions with a MOF-derived sensing platform was presented. The platform was based on a glassy carbon electrode (GCE) modified by Nafion-bismuth/nitrogen doped microporous carbon (NMC) composite, in which the NMC was derived from a zeolitic imidazolate framework-8 (ZIF-8). The good dispersibility, large specific surface area (941 m2g−1), high nitrogen content (25.0 at.%) and good electrical conductivity of the NMC materials, as well as the synergistic effects of Nafion and bismuth-film contributed to the enhanced signals of the electrode during the differential pulse anodic stripping voltammetry (DPASV) measurements for simultaneous detection of trace Cd(II) and Pb(II) in aqueous solution. The calibration curves for Cd(II) covered two linear ranges varying from 2 to 10μgL−1 and 10 to 100μgL−1. As for Pb(II), the linear calibration curves ranged from 0.5 to 10μgL−1 and 10 to 100μgL−1. The detection limits were estimated to be 1.5μgL−1 (S/N=3) for Cd(II) and 0.05μgL−1 (S/N=3) for Pb(II), which were 2 times and 200 times lower than the guideline values of drinking water given by the World Health Organization (WHO), for Cd(II) and Pb(II), respectively. In addition, the good reproducibility and stability of the modified electrode offered a promising perspective for the detection of trace metal ions in practice. Compared with other porous carbon modified electrodes that obtained by either drop-casting or screen-printing method, the proposed Nafion/Bi/NMC/GCE showed a much lower detection limit for Pb(II) and a lower or comparable detection limit for Cd(II). Moreover, the obtaining of uniformly ordered N-doped carbon polyhedron could shed light on the preparation of other heteroatom-doped electrode modifying materials for the detection of heavy metal ions.

Protic salt-based nitrogen-doped mesoporous carbon for simultaneous electrochemical detection of Cd(II) and Pb(II)

Simultaneous detection of Cd(II) and Pb(II) by differential pulse anodic stripping voltammetry at a nitrogen-doped microporous carbon/Nafion/bismuth-film electrode

A Highly Sensitive Electrochemical Sensor for Cd(II) Based on Protic Salt Derived Nitrogen and Sulfur Co-Doped Porous Carbon.

Sensitive and Selective Differential Pulse Voltammetry Detection of Cd(II) and Pb(II) Using Nitrogen-Doped Porous Carbon Nanofiber Film Electrode

Conductive nitrogen-doped carbon nanosheet-encapsulates bismuth nanoparticles for simultaneous high-performance detection of Cd(II) and Pb(II)

A Sensitive Electrochemical Sensor Using a Mesoporous Carbon and Nafion Composite for the Simultaneous Detection of Cadmium and Lead

Simultaneous Electrochemical Detection of Cd2+ and Pb2+ Based on an MOF-Derived Carbon Composite Linked with Multiwalled Carbon Nanotubes

N-Doped Hollow Porous Carbon Spheres/Bismuth Hybrid Film Modified Electrodes for Sensitive Voltammetric Determination of Trace Cadmium

Bismuth Metal–Organic Framework/Carbon Nanosphere Composites for Ultrasensitive Simultaneous Electrochemical Detection of Lead and Cadmium

An Efficient Electrochemical Sensor Based on Three-Dimensionally Interconnected Mesoporous Graphene Framework for Simultaneous Determination of Cd(Ii) and Pb(Ii)

Ultrasensitive Voltammetric Detection of Trace Lead(II) and Cadmium(II) Using MWCNTs‐Nafion/Bismuth Composite Electrodes

Electrochemical Sensor for Cd2+ Detection Based on Carbon Fiber Paper Sequentially Modified with CoMOF, AuNPs, and Glutathione

Simultaneous electrochemical sensing of heavy metal ions based on a g-C3N4/CNT/NH2-MIL-88(Fe) nanocomposite.

Application of Nitrogen-Doped Reduced Graphene Oxide-Persimmon Tannin Nanocomposites for Electrochemical Detection of Cd (II) in Water Resources

Ti3C2-MXene@N-doped carbon heterostructure-based electrochemical sensor for simultaneous detection of heavy metals

A Novel Electrochemical Sensor for Simultaneous Detection of Cd2+ and Pb2+ by MXene Aerogel-Cuo/carbon Cloth Flexible Electrode Based on Oxygen Vacancy and Bismuth Film

Highly Sensitive and Selective Detection of Cadmium with a Graphite Carbon Nitride Nanosheets/nafion Electrode

A Facile Electrochemical Sensor Based on PyTS–CNTs for Simultaneous Determination of Cadmium and Lead Ions

Sensitive Voltammetric Detection of Trace Heavy Metals in Real Water Using Multi-Wall Carbon Nanotubes/Nafion Composite Film Electrode

Synthesis of a Three-Dimensional (Bio)2co3@single-Walled Carbon Nanotube Nanocomposite and Its Application for Ultrasensitive Detection of Trace Pb(II) and Cd(II) by Incorporating Nafion

Ultrasensitive Sensor Based on Novel Bismuth Carbon Nanomaterial for Lead and Cadmium Determination in Natural Water, Contaminated Soil and Human Plasma