Light Absorption Modulation of Novel Fe2tio5 Inverse Opals for Photoelectrochemical Water Splitting

Xiaoqiang An,Huachun Lan,Ruiping Liu,Huijuan Liu,Jiuhui Qu

DOI: https://doi.org/10.1039/c7nj00294g

IF: 3.3

2017-01-01

New Journal of Chemistry

Abstract:Fe2TiO5 inverse opals with modulated light absorption were prepared. Enhanced light absorption and superior charge separation resulted in high photocurrent.

What problem does this paper attempt to address?

Ferroelectric Spontaneous Polarization Assisted TiO2@BaTiO3@Ag Photoanode for Efficient Photoelectrochemical Water Splitting Via BaTiO3 Phase Regulation

Lei Yang,Anzheng Zhu,Xiaodong Huang,Chonghai Deng,Kunhong Hu,Hai Yu,Jianguo Lv

DOI: https://doi.org/10.1016/j.ijhydene.2023.12.132

IF: 7.2

2024-01-01

International Journal of Hydrogen Energy

Abstract:In this work, TiO2@BaTiO3@Ag composite photoanodes were synthesized. By fabricating BaTiO3 with different phase structures, the influence of crystalline phase of BaTiO3 on PEC water splitting was investigated. Furthermore, hot electrons generated in the plasmonic effect of Ag nanoparticles can be efficiently injected into TiO2 film with the assistance of spontaneous polarization electric field (SPEF). Benefitting from this SPEF coupled plasmonic effect, the optimized TiO2@BaTiO3@Ag photoanode (T-TB@Ag) achieved a maximum photocurrent density of 7.30 mA cm-2 (1.23 V vs. RHE) under AM 1.5 G simulated sunlight, which is 6 times that of the nonferroelectric cubic phase TiO2@BaTiO3@Ag photoanode (C-TB@Ag). This ferroelectric spontaneous polarization coupling plasmonic effect can effectively reduce carrier recombination and promote the separation of photocarriers, which ultimately increases PEC water splitting activity.
Photon Upconversion in Hetero‐nanostructured Photoanodes for Enhanced Near‐Infrared Light Harvesting

Liap Tat Su,Siva Krishna Karuturi,Jingshan Luo,Lijun Liu,Xinfeng Liu,Jun Guo,Tze Chien Sum,Renren Deng,Hong Jin Fan,Xiaogang Liu,Alfred Iing Yoong Tok

DOI: https://doi.org/10.1002/adma.201204353

IF: 29.4

2013-01-01

Advanced Materials

Abstract:A hetero-nanostructured photoanode with enhanced near-infrared light harvesting is developed for photo-electrochemical cells. By spatially coating upconversion nanoparticles and quantum dot photosensitizers onto TiO2 inverse opal, this architecture allows direct irradiation of upconversion nanoparticles to emit visible light that excites quantum dots for charge separation. Electrons are injected into TiO2 with minimal carrier losses due to continuous electron conducting interface.
Highly ordered ZnO/ZnFe2O4 inverse opals with binder-free heterojunction interfaces for high-performance photoelectrochemical water splitting

Tingting Yang,Jiawei Xue,Hao Tan,Anjian Xie,Shikuo Li,Wensheng Yan,Yuhua Shen

DOI: https://doi.org/10.1039/c7ta07798j

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Highly ordered heteronanostructures with binder-free interfaces are the key factors in developing high-performance photoanodes. Here, we design and fabricate three-dimensional ordered macroporous ZnO/ZnFe2O4 inverse opals with binder-free heterojunction interfaces that improve the separation of photogenerated charge carriers. The well-defined ZnO/ZnFe2O4 inverse opal displays a high photoconversion efficiency of 0.81% at 0.38 V versus the RHE without any co-catalyst assistance, which is over 6 times higher than that of the pristine ZnO sample (0.13% at 0.65 V vs. the RHE). Furthermore, the photoanode is quite stable even after 10 h of continuous illumination with a slight photocurrent decay of 4.9% (88.0% loss for the pristine ZnO). The high performances of the ZnO/ZnFe2O4 inverse opals can be attributed to the improved interfacial charge carrier separation based on electrochemical analysis and first-principles calculations. This work may provide more insights into the design of highly efficient photoanodes for photoelectrochemical applications.
Enhanced Photocatalytic Properties and Photoinduced Crystallization of TiO2-Fe2O3 Inverse Opals Fabricated by Atomic Layer Deposition

Carina Hedrich,Nithin T James,Laura G Maragno,Valéria de Lima,Sergio Yesid Gómez González,Robert H Blick,Robert Zierold,Kaline P Furlan

DOI: https://doi.org/10.1021/acsami.4c10831

2024-09-03

Abstract:The use of solar energy for photocatalysis holds great potential for sustainable pollution reduction. Titanium dioxide (TiO2) is a benchmark material, effective under ultraviolet light but limited in visible light utilization, restricting its application in solar-driven photocatalysis. Previous studies have shown that semiconductor heterojunctions and nanostructuring can broaden the TiO2's photocatalytic spectral range. Semiconductor heterojunctions are interfaces formed between two different semiconductor materials that can be engineered. Especially, type II heterojunctions facilitate charge separation, and they can be obtained by combining TiO2 with, for example, iron(III) oxide (Fe2O3). Nanostructuring in the form of 3D inverse opals (IOs) demonstrated increased TiO2 light absorption efficiency of the material, by tailoring light-matter interactions through their photonic crystal structure and specifically their photonic stopband, which can give rise to a slow photon effect. Such effect is hypothesized to enhance the generation of free charges. This work focuses on the above-described effects simultaneously, through the synthesis of TiO2-Fe2O3 IOs via multilayer atomic layer deposition (ALD) and the characterization of their photocatalytic activities. Our results reveal that the complete functionalization of TiO2 IOs with Fe2O3 increases the photocatalytic activity through the slow photon effect and semiconductor heterojunction formation. We systematically explore the influence of Fe2O3 thickness on photocatalytic performance, and a maximum photocatalytic rate constant of 1.38 ± 0.09 h-1 is observed for a 252 nm template TiO2-Fe2O3 bilayer IO consisting of 16 nm TiO2 and 2 nm Fe2O3. Further tailoring the performance by overcoating with additional TiO2 layers enhances photoinduced crystallization and tunes photocatalytic properties. These findings highlight the potential of TiO2-Fe2O3 IOs for efficient water pollutant removal and the importance of precise nanostructuring and heterojunction engineering in advancing photocatalytic technologies.
Visible Light Trapping against Charge Recombination in FeOx–TiO2 Photonic Crystal Photocatalysts

Martha Pylarinou,Alexia Toumazatou,Elias Sakellis,Evangelia Xenogiannopoulou,Spiros Gardelis,Nikos Boukos,Athanasios Dimoulas,Vlassis Likodimos

DOI: https://doi.org/10.3390/ma14237117

IF: 3.4

2021-11-23

Materials

Abstract:Tailoring metal oxide photocatalysts in the form of heterostructured photonic crystals has spurred particular interest as an advanced route to simultaneously improve harnessing of solar light and charge separation relying on the combined effect of light trapping by macroporous periodic structures and compositional materials’ modifications. In this work, surface deposition of FeOx nanoclusters on TiO2 photonic crystals is investigated to explore the interplay of slow-photon amplification, visible light absorption, and charge separation in FeOx–TiO2 photocatalytic films. Photonic bandgap engineered TiO2 inverse opals deposited by the convective evaporation-induced co-assembly method were surface modified by successive chemisorption-calcination cycles using Fe(III) acetylacetonate, which allowed the controlled variation of FeOx loading on the photonic films. Low amounts of FeOx nanoclusters on the TiO2 inverse opals resulted in diameter-selective improvements of photocatalytic performance on salicylic acid degradation and photocurrent density under visible light, surpassing similarly modified P25 films. The observed enhancement was related to the combination of optimal light trapping and charge separation induced by the FeOx–TiO2 interfacial coupling. However, an increase of the FeOx loading resulted in severe performance deterioration, particularly prominent under UV-Vis light, attributed to persistent surface recombination via diverse defect d-states.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Boosting the photocathode performances of protected Cu2O inverse opals using photonic-crystal heterostructures

Zheli Wu,Ming Fu,Xiaoyu Liu,Jiefeng Li,Chenhui Wei,Yuting Zhang,Yijun Ning,Dawei He,Yongsheng Wang

DOI: https://doi.org/10.1016/j.apsusc.2023.158792

IF: 6.7

2024-01-01

Applied Surface Science

Abstract:Cuprous oxide (Cu2O) is a highly efficient p-type semiconductor photocatalytic material with the capability for visible light absorption. In this work, three-dimensional Cu2O inverse opals with different diameters were prepared using the electrochemical deposition method. The photocathode performances were enhanced by adjusting the wavelength of photonic band gap, being co-modified by Au and Ag nanoparticles, applying the protective layers, and fabricating a photonic-crystal heterostructure with another p-type semiconductor. The slow-light effect leads a 23.9 % increase in photocurrent density. The co-modification of Au and Ag nanoparticles achieves a 77 % average increase in photocurrent density compared with pure Cu2O inverse opals. Conformal protective layers, consisting of ZnO and Al2O3 and deposited using atomic layer deposition, prevent the photocorrosion of the Cu2O photocathode while preserving its photocatalytic activity. After one hour of illumination, the photo-generated current density of protected Cu2O inverse opals is nearly three times higher than that of their uncoated counterparts. By fabricating Ag-doped ZnO with p-type characteristics and combining it with Cu2O into a heterostructure, the saturated photocurrent density of the Ag-doped ZnO/Cu2O heterostructure reaches −3.78 mA/cm2, which is almost 3.2 times higher than that of pristine Cu2O inverse opal at −0.12 V vs RHE.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Highly Enhanced Photoelectrocatalytic Properties by Α-Fe 2 O 3 Modified NF-TiO 2 Pyramids with Dominant (101) Facets

Qi Wang,Naxin Zhu,Enqin Liu,Leiling Fu,Tiantian Zhou,Yanqing Cong

DOI: https://doi.org/10.1016/j.electacta.2016.09.025

IF: 6.6

2016-01-01

Electrochimica Acta

Abstract:Visible-light-active Fe2O3/NF-TiO2 film was prepared by depositing alpha-Fe2O3 nanoparticles onto the surface of pyramid-shaped NF-TiO2 via sequential electro-deposition and electro-anodization processes. NF-TiO2 with dominant (101) facets was obtained via calcining TiO2 nanotubes (TiO2-NTs) in the presence of NH4F. The structural and optical properties were carefully studied by XRD, SEM, HRTEM, XPS and UV-Vis-DRS. Photoelectrochemical measurements, such as linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS) and Mott-Schottky (M-S) plots, were also carried out to investigate the generation, separation and transfer of photogenerated charges. It was found that Fe2O3/NF-TiO2 exhibited the best photoelectrocatalytic (PEC) activity relative to Fe2O3/TiO2-NTs or Fe2O3/N-TiO2. The formation of anatase-rutile heterojunction, wider spectral response, increased photocurrent response and greatly reduced charge transfer resistance, could be positive driving force for the enhanced PEC activity. Simultaneous PEC reduction of Cr(VI) and degradation of phenol were evaluated under visible light using Fe2O3/NF-TiO2 film as photoanode and Ti sheet as cathode. The calculated rate constants for Cr(VI) and phenol were 4.3 and 3.6 times relative to that on Fe2O3/TiO2-NTs, respectively. Good stability was also confirmed in cyclic runs using the optimized photoanode. (C) 2016 Elsevier Ltd. All rights reserved.
Bi(2) WO(6) Inverse Opals: Facile Fabrication and Efficient Visible-Light-driven Photocatalytic and Photoelectrochemical Water-Splitting Activity.

Liwu Zhang,Clarissa Baumanis,Lars Robben,Tarek Kandiel,Detlef Bahnemann

DOI: https://doi.org/10.1002/smll.201101152

IF: 13.3

2011-01-01

Small

Abstract:The synthesis of Bi2WO6 inverse opal photonic crystals is performed via a facile and economical method. Bi2WO6 inverse opals exhibit much higher photocatalytic activities for the degradation of methylene blue and salicylicic acid under visible light illumination as compared with a reference nanofilm. The photon-to-hydrogen conversion efficiencies of photoelectrochemical water splitting exhibit an almost threefold increase due to the inverse-opal structure. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.
3D ZnO/Au/CdS Sandwich Structured Inverse Opal as Photoelectrochemical Anode with Improved Performance

Cheng Li,Xiuting Zhu,Haifeng Zhang,Zhichao Zhu,Bo Liu,Chuanwei Cheng

DOI: https://doi.org/10.1002/admi.201500428

IF: 5.4

2015-10-01

Advanced Materials Interfaces

Abstract:Photoelectrochemical water splitting: A novel 3D ZnO/Au/CdS sandwich structured inverse opal photoanode is designed for a photoelectrochemical water splitting application with improved performance.

materials science, multidisciplinary,chemistry
Ordered Ti-doped FeVO4 nanoblock photoanode with improved charge properties for efficient solar water splitting

Qingyi Zeng,Xijun Fu,Sheng Chang,Qingsong Zhang,Zhu Xiong,Yong Liu,Guowen Peng,Mi Li

DOI: https://doi.org/10.1016/j.jcis.2021.07.037

IF: 9.9

2021-12-01

Journal of Colloid and Interface Science

Abstract:Highly photoactive FeVO4 photoanodes with ordered nanoblock morphology and uniform Ti-doping were prepared by drop-casting mixed Ti and V precursors onto FeOOH nanorod films and following an annealing process. The results indicate that Ti4+ is uniformly doped into the FeVO4 lattice by substituting V5+ and provides an increased number of O2- vacancies. The optimized film thickness and doping level are 620 nm and 0.3%, respectively. Compared to the undoped sample, the Ti-doped photoanode showed ∼219% enhancement in photocurrent at 1.0 V vs Ag/AgCl under back illumination of AM 1.5, reaching a state-of-the-art value of ∼1.47 mA cm-2, and also achieved stable and efficient overall water splitting activity with evolution rates of 28.3 and 14.1 μmol cm-2 h-1 for H2 and O2, respectively. The excellent PEC performance could be attributed to the remarkably enhanced charge carrier concentration and conductivity, and the facilitated charge transfer kinetics across the semiconductor/electrolyte interface, as a result of Ti-doping.

chemistry, physical
High photocatalytic activity enhancement of titania inverse opal films by slow photon effect induced strong light absorption

Min Wu,Jun Jin,Jing Liu,Zhao Deng,Yu Li,Olivier Deparis,Bao-Lian Su

DOI: https://doi.org/10.1039/c3ta13574h

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:The photonic effect on the photocatalytic activity of the continuous titania inverse opal (TiO2-IO) films differing only by the air sphere size (185 and 165 nm) and prepared by a colloid crystal template approach and annealing at different temperatures (700 and 800 °C) has been investigated by aqueous solution degradation of dye pollutants using mesoporous TiO2 thin films as the reference. The high quality of TiO2 inverse opal films has been confirmed by a blue shift of the Photonic Band Gap (PBG) with increasing light incident angle. Excellent agreement was found between theoretical and experimental reflectance spectra, confirming the photonic crystal structure of the samples. The slow photon light absorption enhancement effect inducing highly improved photocatalytic degradation of dye pollutants has been revealed in an aqueous reaction system. When compared with the mesoporous (m-TiO2) films obtained under the same conditions, all the TiO2-IO films demonstrate a much higher photocatalytic activity. At a light incident angle of 0°, the TiO2-IO-700 film (air sphere size: 185 nm) showed a better photocatalytic activity than that of TIO2-IO-800 (air sphere size: 165 nm). Most importantly, with increasing light incident angle, the photocatalytic activity of the TiO2-IO-700 film decreases whilst that of the TiO2-IO-800 film increases sharply due to the enhancement of light absorption related to a slow photon effect, generating more electron-holes. The present work revealed that photocatalytic activity can be dramatically enhanced by utilizing slow photons located at the PBG edges with energies close to the electronic bandgap of the semiconductor. The study using the slow-photon effect on the basis of photonic crystals to improve the photocatalytic activity by enhancing the light absorption could be an important future research direction. The slow-photon effect can open a new exciting avenue to all the fields related to light absorption including solar cells, optical telecommunications and optical computing.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Photoelectrodes Based Upon Mo:BiVO4 Inverse Opals for Photoelectrochemical Water Splitting.

Min Zhou,Jian Bao,Yang Xu,Jiajia Zhang,Junfeng Xie,Meili Guan,Chengliang Wang,Liaoyong Wen,Yong Lei,Yi Xie

DOI: https://doi.org/10.1021/nn501996a

IF: 17.1

2014-01-01

ACS Nano

Abstract:BiVO4 has been regarded as a promising material for photoelectrochemical water splitting, but it suffers from a major challenge on charge collection and utilization. In order to meet this challenge, we design a nanoengineered three-dimensional (3D) ordered macro-mesoporous architecture (a kind of inverse opal) of Mo:BiVO4 through a controllable colloidal crystal template method with the help of a sandwich solution infiltration method and adjustable post-heating time. Within expectation, a superior photocurrent density is achieved in return for this design. This enhancement originates primarily from effective charge collection and utilization according to the analysis of electrochemical impedance spectroscopy and so on. All the results highlight the great significance of the 3D ordered macro-mesoporous architecture as a promising photoelectrode model for the application in solar conversion. The cooperating amplification effects of nanoengineering from composition regulation and morphology innovation are helpful for creating more purpose-designed photoelectrodes with highly efficient performance.
Realizing high visible-light-induced carriers mobility in TiO 2-based photoanodes

Jingfu He,Shibao Zhang,Zhihu Sun,Weiren Cheng,Qinghua Liu,Yong Jiang,Fengchun Hu,Zhiyun Pan,Bo He,Ziyu Wu,Wensheng Yan,Shiqiang Wei

DOI: https://doi.org/10.1016/j.jpowsour.2013.11.057

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:Increasing the quantum conversion efficiency in visible-light region is a key issue for the efficient usage of solar energy in the process of photoelectrochemical (PEC) water splitting. Here, based on the N anion and S cation codoped TiO2 thin film photoanodes, we find experimentally and theoretically that the transport ability of visible-light-induced carriers can be notably enhanced by engineering the dopant electronic energy states. The hole transport resistivity is decreased from 6.8 × 104 to 1.3 × 104 Ω m via delocalizing the introduced bands, leading to an evident increase of the internal quantum efficiency from 5% to 20% at the visible-light region of 450–550 nm. Further DFT calculations exhibit that the split of the isolated band is induced by a strong N and S hybridization, which favors to decrease the hole effective mass and to improve the hole mobility by three times. The photocurrent of N − S codoped TiO2 thin film is thus twice that of monodoping cases, the best value for doping modified TiO2 thin film photoanodes. This work may provide not only a design principle but also a candidate for tailoring and optimizing TiO2 towards high PEC activity.
Enhanced Incident Photon-To-Electron Conversion Efficiency of Tungsten Trioxide Photoanodes Based on 3D-Photonic Crystal Design

Xiaoqing Chen,Jinhua Ye,Shuxin Ouyang,Tetsuya Kako,Zhaosheng Li,Zhigang Zou

DOI: https://doi.org/10.1021/nn200100v

IF: 17.1

2011-01-01

ACS Nano

Abstract:In this study, 3D-photonic crystal design was utilized to enhance incident photon-to-electron conversion efficiency (IPCE) of WO(3) photoanodes. Large-area and high-quality WO(3) photonic crystal photoanodes with inverse opal structure were prepared. The photonic stop-bands of these WO(3) photoanodes were tuned experimentally by variation of the pore size of inverse opal structures. It was found that when the red-edge of the photonic stop-band of WO(3) inverse opals overlapped with the WO(3) electronic absorption edge at E(g) = 2.6-2.8 eV, a maximum of 100% increase in photocurrent intensity was observed under visible light irradiation (λ > 400 nm) in comparison with a disordered porous WO(3) photoanode. When the red-edge of the stop-band was tuned well within the electronic absorption range of WO(3), noticeable but less amplitude of enhancement in the photocurrent intensity was observed. It was further shown that the spectral region with a selective IPCE enhancement of the WO(3) inverse opals exhibited a blue-shift in wavelength under off-normal incidence of light, in agreement with the calculated stop-band edge locations. The enhancement could be attributed to a longer photon-matter interaction length as a result of the slow-light effect at the photonic stop-band edge, thus leading to a remarkable improvement in the light-harvesting efficiency. The present method can provide a potential and promising approach to effectively utilize solar energy in visible-light-responsive photoanodes.
Enhanced bulk and interfacial charge transfer in Fe:VOPO4 modified Mo:BiVO4 photoanodes for photoelectrochemical water splitting

Bing He,Yu Cao,Kaijie Lin,Mingjie Wu,Yunhai Zhu,Xun Cui,Liang Hu,Yingkui Yang,Xueqin Liu

DOI: https://doi.org/10.1016/j.esci.2024.100242

2024-01-01

eScience

Abstract:Bismuth vanadate (BiVO4) is a promising photoanode material for photoelectrochemical (PEC) water oxidation. However, its performance is greatly hindered by poor bulk and interfacial charge transfer. Herein, to address this issue, iron doped vanadyl phosphate (Fe:VOPO4) was grafted on molybdenum doped BiVO4 (Mo:BiVO4) for significantly enhancing charge transfer and oxygen evolution kinetics simultaneously. Consequently, the resultant Fe:VOPO4/Mo:BVO4 photoanode exhibits a remarkable photocurrent density of 6.59 mA cm−2 at 1.23 V versus the reversible hydrogen electrode (VRHE) under AM 1.5G illumination, over approximately 5.5 times as high as that of pristine BiVO4. Systematic studies have demonstrated that the hopping activation energy of small polarons is significantly reduced due to the Mo doping, resulting in accelerated bulk charge transfer. More importantly, the deposition of Fe:VOPO4 promotes the interfacial charge transfer between Mo:BiVO4 and Fe:VOPO4 via the construction of V−O−V and P−O bonds, in addition to facilitating water splitting kinetics. This work provides a general strategy for optimizing charge transfer process, especially at the interface between photoanodes and cocatalysts.
Sandwich-structured TiO2 Inverse Opal Circulates Slow Photons for Tremendous Improvement in Solar Energy Conversion Efficiency

Ehsan Eftekhari,Pierre Broisson,Nikhil Aravindakshan,Zhiqing Wu,Ivan S. Cole,Xiaomin Li,Dongyuan Zhao,Qin Li

DOI: https://doi.org/10.1039/c7ta01703k

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Slow photon circulation in a sandwich-structured TiO2 inverse opal results in tremendously improved photon absorption.
Conformal Macroporous Inverse Opal Oxynitride-Based Photoanode for Robust Photoelectrochemical Water Splitting

Lei Ran,Shi Qiu,Panlong Zhai,Zhuwei Li,Junfeng Gao,Xiaomeng Zhang,Bo Zhang,Chen Wang,Licheng Sun,Jungang Hou

DOI: https://doi.org/10.1021/jacs.1c00946

IF: 15

2021-05-07

Journal of the American Chemical Society

Abstract:Direct photoelectrochemical (PEC) water splitting is of prime importance in sustainable energy conversion systems; however, it is a big challenge to simultaneously control light harvesting and charge transport for the improvement of PEC performance. Herein, we report a three-dimensional ordered macroporous (3DOM) CsTaWO6–xNx inverse opal array as a promising candidate for the first time. To address the critical challenge, an ultrathin carbon-nitride-based layer-intercalated 3DOM CsTaWO6–xNx architecture as a conformal heterojunction photoanode was assembled. This state-of-the-art conformal heterojunction photoanode with carrier-separation efficiency up to 88% achieves a high current density of 4.59 mA cm–2 at 1.6 V versus a reversible hydrogen electrode (vs RHE) under simulated AM 1.5G illumination, which is approximately 3.4 and 17 times larger than that of pristine CsTaWO6–xNx inverse opals and powers photoelectrodes in alkaline media, corresponding to an incident photon-to-current efficiency of 32% at 400 nm and outstanding stability for PEC water splitting. Density functional theory calculations propose that the intimate interface of a conformal photoanode optimizes the charge separation and transfer, thus enhancing the intrinsic water oxidation performance. This work enables us to elucidate the pivotal importance of 3DOM architectures and conformal heterostructures and the promising contributions to excellent PEC water-splitting applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.1c00946?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.1c00946</a>.Preparation of PS spheres, calculation of solar energy conversion efficiency and IPCE tests, charge separation evaluation, first-principle calculations, XRD spectra, SEM and TEM images, XPS spectra, PEC tests, solar energy conversion efficiencies, Mott–Schottky plots, UV–visible absorbance spectra, valence band XPS spectra, bandgap structures, electrochemical impedance spectra, atomic structure models, and PEC data summary (<a class="ext-link" href="/doi/suppl/10.1021/jacs.1c00946/suppl_file/ja1c00946_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary
Enhanced Photoelectrochemical Oxidation of Water over Ti-Doped Α-Fe2o3 Electrodes by Surface Electrodeposition InOOH

Shufeng Zhang,Pengpeng Shangguan,Shaoping Tong,Zhao Zhang,Wenhua Leng

DOI: https://doi.org/10.1021/acs.jpcc.9b05419

2019-01-01

Abstract:Ti-doped alpha-Fe2O3 (Ti-Fe2O3) is regarded as one of the most promising hematite-based photoanodes for photoelectrochemical oxidation of water. However, the sluggish interfacial transfer and rapid recombination of photo generated holes still limit its efficiency. In this article, we report that an approach of surface modification for this material by electrodeposition in In(NO3)(3) containing aqueous solutions was attempted to overcome these disadvantages. The results show that a thin layer of InOOH was formed on the photoelectrodes, confirmed by X-ray photoelectron spectroscopy. This modification could enhance the photoelectrochemical oxidation rate of water. The reason for the improvement was investigated quantitatively by a combination of multiple (photo-)electrochemical techniques and transient absorption spectroscopy. It is demonstrated that the kinetics of photogenerated holes can be well described by a model of involving photogenerated surface-state mediated charge transfer and recombination. The improvement resulted predominantly from the enhanced interfacial transfer rate constant (kappa(ct)) of the photoholes, despite that the surface recombination rate constant (kappa(sr)) slightly increased. Energetically, the increase in kappa(ct) was attributed to more potential drop in the Helmholtz layer. The higher potential drop resulted from more accumulation of photoholes on the surface due to a larger band bending as the Hatband potential negatively shifted. Physically, the increase in kappa(ct) can be explained by that InOOH acts as a so-called cocatalyst to promote the hole transfer. In addition, the implication of these findings is addressed for further designing efficient Ti-Fe2O3 photoanodes.
Ti-treatment and Co–Pi modification of hematite-based photoanodes for improved photoelectrochemical water oxidation

Changhai Liu,Yu Xu,Heng Luo,Chao Zhang,Wenchang Wang,Zhidong Chen

DOI: https://doi.org/10.1007/s10854-019-02095-1

2019-08-28

Abstract:Hematite has been recognized as a promising photoanode materials for the photoelectrochemical water splitting application. A Co–Pi/Fe2TiO5/Fe2O3 composite film has been fabricated by photo-assisted electrodeposition of Co–Pi nanoparticles on the surface of Ti-treated Fe2O3 nanorod arrays, grown perpendicularly on the FTO substrate via one-step hydrothermal method. The films were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and UV–vis diffuse reflectance spectroscopy. The photocurrent response of obtained photoanode with an enhanced photocurrent density of 1.09 and 0.75 mA/cm2 under front-side and back-side illumination compared to Fe2TiO5/Fe2O3, Co–Pi/Fe2O3, and Co–Pi/Fe2TiO5/Fe2O3, due to the suppressed charge carrier recombination and water oxidation dynamics, further indicating that the different effect for the improvement of PEC performance for the front or back sides. Meanwhile, the onset potential for front-side are also improved compared to back-side illumination. The present work demonstrates an exploration for the possible mechanism of front-side and back-side illumination effect via surface modification treatment for the improvement of PEC water splitting application.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Aligned Fe 2 TiO 5 -containing nanotube arrays with low onset potential for visible-light water oxidation

Qinghua Liu,Jingfu He,Tao Yao,Zhihu Sun,Weiren Cheng,Shi He,Yi Xie,Yanhua Peng,Hao Cheng,Yongfu Sun,Yong Jiang,Fengchun Hu,Zhi Xie,Wensheng Yan,Zhiyun Pan,Ziyu Wu,Shiqiang Wei

DOI: https://doi.org/10.1038/ncomms6122

IF: 16.6

2014-01-01

Nature Communications

Abstract:There remains a pressing challenge in the efficient utilization of visible light in the photoelectrochemical applications of water splitting. Here, we design and fabricate pseudobrookite Fe 2 TiO 5 ultrathin layers grown on vertically aligned TiO 2 nanotube arrays that can enhance the conduction and utilization of photogenerated charge carriers. Our photoanodes are characterized by low onset potentials of ~0.2 V, high photon-to-current efficiencies of 40–50% under 400–600 nm irradiation and total energy conversion efficiencies of ~2.7%. The high performance of Fe 2 TiO 5 nanotube arrays can be attributed to the anisotropic charge carrier transportation and elongated charge carrier diffusion length (compared with those of conventional TiO 2 or Fe 2 O 3 photoanodes) based on electrochemical impedance analysis and first-principles calculations. The Fe 2 TiO 5 nanotube arrays may open up more opportunities in the design of efficient and low-cost photoanodes working in visible light for photoelectrochemical applications.

Light Absorption Modulation of Novel Fe2tio5 Inverse Opals for Photoelectrochemical Water Splitting

Ferroelectric Spontaneous Polarization Assisted TiO2@BaTiO3@Ag Photoanode for Efficient Photoelectrochemical Water Splitting Via BaTiO3 Phase Regulation

Photon Upconversion in Hetero‐nanostructured Photoanodes for Enhanced Near‐Infrared Light Harvesting

Highly ordered ZnO/ZnFe2O4 inverse opals with binder-free heterojunction interfaces for high-performance photoelectrochemical water splitting

Enhanced Photocatalytic Properties and Photoinduced Crystallization of TiO2-Fe2O3 Inverse Opals Fabricated by Atomic Layer Deposition

Visible Light Trapping against Charge Recombination in FeOx–TiO2 Photonic Crystal Photocatalysts

Boosting the photocathode performances of protected Cu2O inverse opals using photonic-crystal heterostructures

Highly Enhanced Photoelectrocatalytic Properties by Α-Fe 2 O 3 Modified NF-TiO 2 Pyramids with Dominant (101) Facets

Bi(2) WO(6) Inverse Opals: Facile Fabrication and Efficient Visible-Light-driven Photocatalytic and Photoelectrochemical Water-Splitting Activity.

3D ZnO/Au/CdS Sandwich Structured Inverse Opal as Photoelectrochemical Anode with Improved Performance

Ordered Ti-doped FeVO4 nanoblock photoanode with improved charge properties for efficient solar water splitting

High photocatalytic activity enhancement of titania inverse opal films by slow photon effect induced strong light absorption

Photoelectrodes Based Upon Mo:BiVO4 Inverse Opals for Photoelectrochemical Water Splitting.

Realizing high visible-light-induced carriers mobility in TiO 2-based photoanodes

Enhanced Incident Photon-To-Electron Conversion Efficiency of Tungsten Trioxide Photoanodes Based on 3D-Photonic Crystal Design

Enhanced bulk and interfacial charge transfer in Fe:VOPO4 modified Mo:BiVO4 photoanodes for photoelectrochemical water splitting

Sandwich-structured TiO2 Inverse Opal Circulates Slow Photons for Tremendous Improvement in Solar Energy Conversion Efficiency

Conformal Macroporous Inverse Opal Oxynitride-Based Photoanode for Robust Photoelectrochemical Water Splitting

Enhanced Photoelectrochemical Oxidation of Water over Ti-Doped Α-Fe2o3 Electrodes by Surface Electrodeposition InOOH

Ti-treatment and Co–Pi modification of hematite-based photoanodes for improved photoelectrochemical water oxidation

Aligned Fe 2 TiO 5 -containing nanotube arrays with low onset potential for visible-light water oxidation