Abstract:A stably lithiophilic Li2ZO3 is in situ constructed at garnet electrolyte surface and grain boundaries by interfacial modification with ZrO2 and Li2CO3 co‐sintering to eliminate the detrimental contaminants and lithium‐deficient phases, which significantly improves electrolyte air stability and provides a fast transport path for Li+ while hindering electron transport, ultimately enabling long cycle stability and dendrite‐free solid‐state batteries. Lithophobic Li2CO3/LiOH contaminants and high‐resistance lithium‐deficient phases produced from the exposure of garnet electrolyte to air leads to a decrease in electrolyte ion transfer ability. Additionally, garnet electrolyte grain boundaries (GBs) with narrow bandgap and high electron conductivity are potential channels for current leakage, which accelerate Li dendrites generation, ultimately leading to short‐circuiting of all‐solid‐state batteries (ASSBs). Herein, a stably lithiophilic Li2ZO3 is in situ constructed at garnet electrolyte surface and GBs by interfacial modification with ZrO2 and Li2CO3 (Z+C) co‐sintering to eliminate the detrimental contaminants and lithium‐deficient phases. The Li2ZO3 formed on the modified electrolyte (LLZTO‐(Z+C)) surface effectively improves the interfacial compatibility and air stability of the electrolyte. Li2ZO3 formed at GBs broadens the energy bandgaps of LLZTO‐(Z+C) and significantly inhibits lithium dendrite generation. More Li+ transport paths found in LLZTO‐Z+C by first‐principles calculations increase Li+ conductivity from 1.04×10−4 to 7.45×10−4 S cm−1. Eventually, the Li|LLZTO‐(Z+C)|Li symmetric cell maintains stable cycling for over 2000 h at 0.8 mA cm−2. The capacity retention of LiFePO4|LLZTO‐(Z+C)|Li battery retains 70.5% after 5800 ultralong cycles at 4 C. This work provides a potential solution to simultaneously enhance the air stability and modulate chemical characteristics of the garnet electrolyte surface and GBs for ASSBs.

Li3PO4-added Garnet-Type Li6.5La3Zr1.5Ta0.5O12 for Li-dendrite Suppression

Facile Surface Modification Method to Achieve an Ultralow Interfacial Resistance in Garnet-Based Li Metal Batteries

Hybrid Polymer/Garnet Electrolyte with a Small Interfacial Resistance for Lithium‐Ion Batteries

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

Li3N-Modified Garnet Electrolyte for All-Solid-State Lithium Metal Batteries Operated at 40 °C.

Restrained Li|Garnet Interface Contact Deterioration Manipulated by Lithium Modification for Solid‐State Batteries

Garnet Electrolyte with an Ultralow Interfacial Resistance for Li-Metal Batteries

An <i>in situ</i>-formed high lithiophilic solid lubricant interface layer for garnet-based solid-state lithium metal batteries

Molten Salt Driven Conversion Reaction Enabling Lithiophilic and Air‐Stable Garnet Surface for Solid‐State Lithium Batteries

LiPF6 Induces Phosphorization of Garnet‐Type Solid‐State Electrolyte for Stable Lithium Metal Batteries

Building an Air Stable and Lithium Deposition Regulable Garnet Interface from Moderate-Temperature Conversion Chemistry

Interfacial Modification of Li/Garnet Electrolyte by a Lithiophilic and Breathing Interlayer

Stabilization of Garnet/Liquid Electrolyte Interface Using Superbase Additives for Hybrid Li Batteries

An in situ-formed high lithiophilic solid lubricant interface layer for garnet-based solid-state lithium metal batteries

In-situ cross-linked multifunctional polymer electrolyte buffer layers for high-performance garnet solid-state lithium metal batteries

In‐Situ Construction of Electronically Insulating and Air‐Stable Ionic Conductor Layer on Electrolyte Surface and Grain Boundary to Enable High‐Performance Garnet‐Type Solid‐State Batteries

Garnet Si-Li<sub>7</sub>La<sub>3</sub>Zr<sub>2</sub>O<sub>12</sub> electrolyte with a durable, low resistance interface layer for all-solid-state lithium metal batteries

Efficient Anion Fluoride-Doping Strategy to Enhance the Performance in Garnet-Type Solid Electrolyte Li7La3Zr2O12.

Interface Lithiophobicity Regulation for Lithium Metal Solid-State Batteries

In Situ Formed Surface Layer to Improve the Air Stability of LLZTO and Its Contact with the Li Metal

Origin of Lithiophilicity of Lithium Garnets: Compositing or Cleaning?