Abstract:By interrupted three-point bending experiments, the detailed evolutions of shear-banding and serrated flow as well as their correlation of high toughness Z61Ti2Cu25Al12 bulk metallic glass (BMG) under bending were systematically studied. Three stages can be classified during plastic bending of Z61Ti2Cu25Al12 BMG based on the different characteristics of shear-banding and serrated flow behaviors. Moreover, there has a strong correlation between shear-banding and serrated flow at different stages of plastic bending. It is noteworthy that the driving force for shear bands propagation of BMG beam under bending depends on the bending moment, instead of the applied load. Thus, remarkable positive correlations among bending moment, shear band zone height and average load drop of serrations were found during plastic bending. During the progressive propagation of multiple shear bands, intense interactions and competitions among these shear bands have occurred, which manifested by the self-organized criticality behavior from serrated flow dynamics, as well as the very finer irregular striation patterns and uneven fluctuant morphologies which presented on the shear offset surface. The sizeable plastic zone of Z61Ti2Cu25Al12 BMG is very favorable to achieve the greater macroscopic plasticity and lower the risk of fast catastrophic fracture. Thus, Z61Ti2Cu25Al12 BMG is a promising engineering material for structure elements which are naturally subjected to bending load, such as compliant mechanisms and microelectromechanical systems.

The Introduction of Highly Dense Shear Bands and Their Effect on Plastic Deformation in Zr and Cu-based Bulk Metallic Glasses

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Effect of Pre-Existing Shear Bands on the Tensile Mechanical Properties of A Bulk Metallic Glass

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Evolution of local densities during shear banding in Zr-based metallic glass micropillars

Shear band velocity and activation volume during shear deformation by acoustic emission in a Zr-based bulk metallic glass

Enhanced Plasticity in Zr–Cu–Ag–Al–Be Bulk Metallic Glasses

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Effect of shear bands initiated in the pre-yield region on the deformation behaviour of Zr-based metallic glasses

Determining deformation behaviors in a CuZr-based bulk metallic glass composite

Spatial–Temporal evolution of shear banding in bulk metallic glasses

Enhancement of Plasticity in Zr-based Bulk Metallic Glasses

Plasticity and microstructure of Zr–Cu–Al bulk metallic glasses

Size Distribution of Shear Transformation Zones and Their Evolution Towards the Formation of Shear Bands in Metallic Glasses

Initiation and Evolution of Shear Bands in Bulk Metallic Glass under Tension—an in Situ Scanning Electron Microscopy Observation

Strength Softening at Shear Bands in Metallic Glasses

Relation Between Icosahedral Short-Range Ordering and Plastic Deformation in Zr–Nb–Cu–Ni–Al Bulk Metallic Glasses

Shear banding and serrated flow behaviors of high toughness Zr61Ti2Cu25Al12 bulk metallic glass under bending

Instrumented indentation study of plastic deformation in bulk metallic glasses

Effect of the atomic construction and preparation procedure on the deformation behaviour of CuZr metallic glasses

Non-localized deformation in metallic alloys with amorphous structure