Abstract:Titanium and its alloys have superior electrochemical properties compared to other alloy systems due to the formation of a protective TiO2 film on metal surfaces. The ability to generate the protective oxide layer will depend upon the type of alloy to be used. The aim of this work was to characterize the electrochemical corrosion behavior of titanium Ti-CP2 and alloys Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V, and Ti Beta-C. Samples were anodized in 1 M H2SO4 and H3PO4 solutions with a current density of 0.025 A/cm2. Electrochemical tests on anodized alloys were carried out using a three-electrode cell and exposed in two electrolytes, i.e., 3.5 wt % NaCl and 3.5 wt % H2SO4 solutions at room temperature. Scanning electron microscopy (SEM) was used to observe the morphology of anodized surfaces. The electrochemical techniques used were cyclic potentiodynamic polarization (CPP) and electrochemical noise (EN), based on the ASTM-G61 and G199 standards. Regarding EN, two methods of data analysis were used: the frequency domain (power spectral density, PSD) and time-frequency domain (discrete wavelet transform). For non-anodized alloys, the results by CCP and EN indicate icorr values of ×10−6 A/cm2. However, under anodizing conditions, the icorr values vary from ×10−7 to ×10−9 A/cm2. The PSD Ψ0 values are higher for non-anodized alloys, while in anodized conditions, the values range from −138/−122 dBi (A2·Hz−1)1/2 to −131/−180 dBi (A2·Hz−1)1/2. Furthermore, the results indicated that the alloys anodized in the H3PO4 bath showed an electrochemical behavior that can be associated with a more homogeneous passive layer when exposed to the 3.5 wt % NaCl electrolyte. Alloys containing more beta-phase stabilizers formed a less homogeneous anodized layer. These alloys are widely used in aeronautical applications; thus, it is essential that these alloys have excellent corrosion performance in chloride and acid rain environments.

Corrosion Electrochemical Behaviors of Titanium in HCl-acidizing Fluid Used in Natural Gas Exploitation

Corrosion behavior of titanium in hydrogen peroxide solutions

The Corrosion Behavior of Titanium in Hydrogen Peroxide Solution with Various Additives

Influence of Cupric, Ferric, and Chloride on the Corrosion of Titanium in Sulfuric Acid Solutions Up to 85°C

(Digital Presentation) Corrosion-Resistance Investigation of Titanium Passive Layer in Acidic Solution

Electrochemical Corrosion of Titanium and Titanium Alloys Anodized in H2SO4 and H3PO4 Solutions

Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy

Corrosion resistance of pure titanium in simulated body fluids containing fluoride

Corrosion protection of highly porous titanium by surface engineering

Analysis of Corrosive Causes of Titanium in NaCl Solution

Corrosion Behavior in Hydrochloric Acid of Pure Titanium after Ultrasonic Severe Surface Rolling

Influence of concentration of sulfuric and hydrochloric acids on corrosion resistance of porous titanium

Corrosion Resistance of Industrial Pure Titanium and its Alloys under High Temperature and Different Cooling Methods

Corrosion Resistance and Ion Dissolution of Titanium Implant under Different Temperature Thermal Oxidation

Corrosion behaviors of TA2 and TA36 titanium alloys in a high-sulfur environment

(Digital Presentation) Anti-Corrosion Investigation of Titanium Electrode for Cu Plating

Understanding the effect of fluoride on corrosion behavior of pure titanium in different acids

Corrosion Behaviour of Titanium Alloy and Carbon Steel in a High-Temperature, Single and Mixed-Phase, Simulated Geothermal Environment Containing H2S, CO2 and HCl

Corrosion Behavior of Titanium Alloys (Ti CP2, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V y Ti Beta-C) with Anodized and Exposed in NaCl and H2SO4 Solutions

Characterization of Corrosion Behavior of TA2 Titanium Alloy Welded Joints in Seawater Environment

Research development of corrosion of titanium in the oral bioenvironment