Abstract:Vibration isolation systems with quasi-zero stiffness (QZS) performance have been widely studied because of their characteristics: high static stiffness and low dynamic stiffness. However, the effective displacement range of QZS is usually so small that strongly limits its application existing in real engineering. Thus, this study' main innovation is to attempt to expand the effective displacement range of the QZS system via a semi-active control strategy. We first present a novel quasi-zero stiffness (QZS) vibration isolation system. The QZS characteristic is achieved by combining a mechanism with six oblique springs and a coil spring, which provide negative stiffness and positive stiffness, respectively. The effects of inclination angles of oblique springs on the negative stiffness of the system are first discussed via the static analysis method. The dynamic characteristics under simple harmonic excitation are then analyzed using the harmonic balance method, including the jumping phenomena and force–displacement transmissibility. To further enlarge the effective displacement range of QZS, a feedback displacement strategy is utilized to actively adjust the inclination angles of oblique springs and realize the alteration of the stiffness of the QZS system. Results obtained from theoretical analysis show that, in the aspect of low-frequency vibration isolation performance, different from linear systems, the proposed QZS system has obvious advantages, and the displacement range of quasi-zero stiffness property is significantly expanded from a single equilibrium point to a relatively lager range when the semi-active control strategy is implemented. Furthermore, the virtual prototype simulation results reveal that the proposed QZS system can maintain excellent vibration isolation performance under significant amplitude vibration after adding control.

Resonance of a Quasi-Zero Stiffness Vibration System under Base Excitation with Load Mismatch

Resonance and Performance Analysis of a Harmonically Forced Quasi-Zero-Stiffness Vibration Isolator Considering the Effect of Mistuned Mass

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Investigation on a Quasi-Zero-stiffness Vibration Isolator under Random Excitation

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Subharmonic Response Suppression of a Quasi-Zero Stiffness System

Resonance Response of a Quasi-zero Stiffness Vibration Isolator Considering a Constant Force

A Nonlinear Quasi-Zero-stiffness Vibration Isolation System with Additional X-shaped Structure: Theory and Experiment

Accurate nonlinear dynamic characteristics analysis of quasi-zero-stiffness vibration isolator via a modified incremental harmonic balance method

Superharmonic Resonance of the Quasi-Zero-stiffness Vibration Isolator and Its Effect on the Isolation Performance

Design, analysis and semi-active control of a quasi-zero stiffness vibration isolation system with six oblique springs

A Non-Smooth Quasi-Zero-stiffness Isolator with Displacement Constraints

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

Coupled Nonlinear Vibration Characteristics of Quasi-Zero-stiffness Gough-Stewart Isolation Platform

Investigations on a Vertical Isolation System with Quasi-Zero Stiffness Property

Isolation Performance of the Quasi-Zero Stiffness Isolation System Enhanced by Mixed Tuned Inerter Damper

Nonlinear compensation method for quasi-zero stiffness vibration isolation

The vibration isolation characteristics of torsion bar spring with negative stiffness structure

Linear and Nonlinear Stiffness Compensation for Low-Frequency Vibration Isolation: a Comparative Study

Dynamic characteristics of two degree-of-freedom quasi-zero stiffness vibration isolation system with nonlinear springs

Experiment and Numerical Investigations on a Vertical Isolation System with Quasi-Zero Stiffness Property