Abstract:Quasi-zero stiffness (QZS) vibration isolators show great advantages in low frequency vibration isolation and often developed by compensating the negative stiffness of the bistable structure by linear spring. To overcome the limitation of the bistable property, this paper utilizes linear stiffness (linear spring) and nonlinear stiffness (repulsive magnets) respectively to compensate the general negative stiffness (rhombus structure), and realizes two types of vibration isolators, the QZS-L and QZS-N isolator. Static models are established to characterize the stiffness property and reveal two basic principles for realizing QZS. The realization of QZS in the QZS-L isolator requires large deformation, but it can be achieved under small deformation in the QZS-N system. Both the QZS-L isolator and QZS-N isolator have weak asymmetry in stiffness, which leads to bias in steady-state response. And the former has stronger asymmetry and greater bias. The adjustment method of the QZS-L and QZS-N isolators for different loads is also elaborated separately. A unified dynamic model is established and the displacement transmissibility is derived to evaluate the vibration isolation performance of the two system. The QZS-L isolator is a softening system with a left-shifted resonance peak, while the QZS-N behave as a hardening system with a right-shifted resonance peak. Both isolators have a low resonant frequency and a wide isolation frequency band. Moreover, the initial isolation frequency can become lower when adjusted for larger loads. Comprehensive comparisons and discussions of static characteristics, isolation band, and zero offset are instructive in designing low frequency vibration isolators.

Resonance Response of a Quasi-zero Stiffness Vibration Isolator Considering a Constant Force

Resonance and Performance Analysis of a Harmonically Forced Quasi-Zero-Stiffness Vibration Isolator Considering the Effect of Mistuned Mass

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Resonance of a Quasi-Zero Stiffness Vibration System under Base Excitation with Load Mismatch

Investigation on a Quasi-Zero-stiffness Vibration Isolator under Random Excitation

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

Subharmonic Response Suppression of a Quasi-Zero Stiffness System

Superharmonic Resonance of the Quasi-Zero-stiffness Vibration Isolator and Its Effect on the Isolation Performance

Low-frequency vibration isolation via new wide range zero-stiffness isolator with multiple negative stiffness mechanisms

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Study on the Effect of Nonlinear Inertia on the Vibration Isolation Performance of Quasi-Zero-stiffness Isolators

Accurate nonlinear dynamic characteristics analysis of quasi-zero-stiffness vibration isolator via a modified incremental harmonic balance method

Linear and Nonlinear Stiffness Compensation for Low-Frequency Vibration Isolation: a Comparative Study

A Study of a Pendulum-Like Vibration Isolator with Quasi-Zero-Stiffness

On the analysis of an actual model of a quasi-zero stiffness vibration isolator

A nonlinear quasi-zero stiffness vibration isolator with quintic restoring force characteristic: A fundamental analytical insight