Abstract:Under the background of the continuous rise of CO 2 annual emissions, the development of CO 2 capture and utilization technology is urgent. This study focuses on improving the catalytic capacity of the catalyst for CO 2 hydrogenation, improving the efficiency of CO 2 conversion to methanol, and converting H 2 into chemical substances to avoid the danger of H 2 storage. Based on the concept of element sharing, the ASMZ (Aluminum Shares Metal Zeolite catalysts) series catalyst was prepared by combining the CuO–ZnO–Al 2 O 3 catalyst with the ZSM-5 zeolite using the amphoteric metal properties of the Al element. The basic structural properties of ASMZ catalysts were compared by XRD, FTIR, and BET characterization. Catalytic properties of samples were measured on a micro fixed-bed reactor. The catalytic mechanism of the catalyst was further analyzed by SEM, TEM, XPS, H 2 -TPR, and NH 3 -TPD. The results show that the ASMZ3 catalyst had the highest CO 2 conversion rate (26.4%), the highest methanol selectivity (76.0%), and the lowest CO selectivity (15.3%) in this study. This is mainly due to the fact that the preparation method in this study promotes the exposure of effective weakly acidic sites and medium strength acidic sites (facilitating the hydrogenation of CO 2 to methanol). At the same time, the close binding of Cu–ZnO–Al 2 O 3 (CZA) and ZSM-5 zeolite also ensures the timely transfer of catalytic products and ensures the timely play of various catalytic active centers. The preparation method of the catalyst in this study also provides ideas for the preparation of other catalysts.

Preparation and CO2 hydrogenation catalytic properties of alumina microsphere supported Cu-based catalyst by deposition-precipitation method

Cu/ZnAl 2 O 4 catalysts prepared by ammonia evaporation method: Improving methanol selectivity in CO 2 hydrogenation via regulation of metal-support interaction

Cu/ZnAl2O4 Catalysts Prepared by Ammonia Evaporation Method: Improving Methanol Selectivity in CO2 Hydrogenation Via Regulation of Metal-Support Interaction

Synthesis of a Cu@ZnO1-x/Al2O3 Catalyst with High-Density ZnO1-x-Cu Interfacial Sites for Enhanced CO2 Hydrogenation to Methanol

Controlling H2 adsorption of Cu/ZnO/Al2O3/MgO with enhancing the performance of CO2 hydrogenation to methanol at low temperature

HYDROGENATION ON SUPPORTED Cu-Mn-ZnOX CATALYST--EFFECT OF PREPARATION METHOD AND REACTION CONDITIONS

Highly dispersed Pd nanoparticles supported on dendritic mesoporous CeZrZnOx for efficient CO2 hydrogenation to methanol

Effect of Si/Al Ratio of Mesoporous Support on the Structure Evolution and Catalytic Performance of the Cu/Al-HMS Catalyst

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

Preparation of Cu/ZnO/Al2O3 Catalysts in a Solvent-Free Routine for CO Hydrogenation

Hydrogenation of CO2 to CH3OH over CuO/ZnO/Al2O3 Catalysts Prepared Via a Solvent-Free Routine

The Preparation of Layered Double Metals Hydroxides Zn(Cu)/Al-LDHs and the Photocatalytic Reduction of CO2

Influences of preparation methods of ZrO2 support and treatment conditions of Cu/ZrO2 catalysts on synthesis of methanol via CO hydrogenation

A High Efficient Cupd0.1/Γ-Al2o3 Catalyst with Isolated Pd Species for Co2 Hydrogenation to Methanol

Synthesis of Methanol over Highly Dispersed Cu-Fe Based Catalysts Derived from Layered Double Hydroxides.

CO2 Hydrogenation to Methanol over Bimetallic Pd-Cu Catalysts Supported on TiO2-CeO2 and TiO2-ZrO2

Preparation of catalyst for CO2 hydrogenation reaction based on the idea of element sharing and preliminary exploration of catalytic mechanism

On the Role of Hydroxyl Groups on Cu/Al 2 O 3 in CO 2 Hydrogenation

Comparative Study on the Effect of Cerina and Alumina on the Catalytic Activity of CuO-ZnO Based Catalyst in CO2 Hydrogenation to Methanol

PdCu supported on dendritic mesoporous CexZr1-xO2 as superior catalysts to boost CO2 hydrogenation to methanol

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol