Abstract:In the development of advanced steel, accurate and detailed knowledge about the kinetics of phase transformations and microstructure formation is critical. The critical issue in pearlite-austenite transformation is the consideration of diffusional paths of the alloy element. Simulation has been an available method to study the diffusion of alloy elements and the migration rate of the phase boundary in the complex morphological evolution of austenite growth. The isothermal pearlite-austenite transformations at 720 and 740 degrees C in Fe-0.6%C-2%Mn (mass fraction) alloy were studied by phase-field methods based on MICRESS. At different temperatures, the effects of diffusional paths on the austenite transformation were discussed. To achieve a semiquantitative verification of the simulated results, the migration rates of the austenite/pearlite boundary at 720 and 740 degrees C were estimated from the experimental kinetics curves by fitting the JMA equation. By measuring the Mn profile in austenite, the modes of the austenization at 720 and 740 degrees C can be verified as partitioned local equilibrium (PLE) and non-partitioned local equilibrium (NPLE) modes. The heterogeneous distribution of Mn in austenite at 740 degrees C can be observed with STEM-EDS. However, the homogenous distribution of Mn can be found near the pearlite/austenite boundary in austenite at 720 degrees C. The cases considering the gamma, alpha, and interface-diffusional paths were simulated by phase-field methods to compare with the migration rates of the austenite/pearlite boundary. Because carbon is an interstitial element in steel and has an interstitial diffusional mechanism, it can be speculated reasonably that the diffusion of C mainly proceeded in austenite and ferrite through the considerations of the atom-size of carbon and the experimental results. Phase-field methods were used to study Mn diffusion in the lamellar pearlite-austenite transformation. With the analysis of the experimental estimations, the interface-diffusional path was observed as the dominant path for the Mn diffusion. It is because the Mn atoms have greater diffusivity in interfaces than in gamma or alpha-diffusional paths. Furthermore, the diffusional activation energy is closely related to the diffusivity of Mn at the interface. Moreover, compared with the gamma-diffusional path, the diffusional flux of Mn in ferrite is much larger than that in austenite. Thus, it can be concluded that the contribution of the alpha-diffusional path to the migration rate of the pearlite/austenite boundary is larger than that of the gamma-diffusional path. As a result, considering the alpha-diffusional path in the thermodynamics analysis under NPLE mode makes more sense. However, ignoring the interface- and alpha-diffusional path, which is different from the traditional cognition in PLE mode, will result in a magnitude error for the thermodynamics analysis.

Discussions on the Correlation Between Thermodynamics and Kinetics During the Phase Transformations in the Tmcp of Low-Alloy Steels

Studies on Phase Transformations and Their Applications in Materials Engineering

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Thermomechanical Control Process of Low Carbon Bainite Microalloyed Engineering Steel

Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

Thermodynamics of Fcc–fct Martensitic Transformation in Mn–X(X = Cu,Fe) Alloys

Theory and Modeling of Phase Transformations under Stress in Steel

Phase Field Study of the Diffusional Paths in Pearlite-Austenite Transformation

Analysis of phase transformation thermodynamics and kinetics and its relationship to structure-mechanical properties in a medium-Mn high strength steel

Study of Phase Transformations and Interface Evolution in Carbon Steel under Temperatures and Loads Using Molecular Dynamics Simulation

The effects of thermo-mechanical control process on microstructures and mechanical properties of a commercial pipeline steel

Progress in Effect of Alloying Element Partition on Thermodynamics and Kinetics of Pearlite Transformation and Its Austenitization

Evaluation of Kinetic Equation of Athermal Martensitic Transformation in Low Carbon Steels

Thermodynamic character of phase transformation of TCA titanium alloy electron beam welded joint

Application of the Thermodynamic Extremal Principle to Massive Transformations in Fe-C Alloys

Phase-field Modeling of Cyclic Phase Transformations in Low-Carbon Steels

Towards the ab initio based theory of the phase transformations in iron and steel

The Deformation Behavior Analysis and Mechanical Modeling of Step/Intercritical Quenching and Partitioning-Treated Multiphase Steels

Thermodynamic prediction and experimental verification of phase transformation kinetics in 3Mn steel with Ti and V microadditions

EXPERIMENTAL STUDY AND NUMERICAL PREDICTION OF PHASE TRANSFORMATION EVOLUTION DURING TEMPERING PROCESS OF MARTENSITE

Mechanism and control of nonuniform phase transformation of microalloyed dual-phase steel during cooling process after hot rolling