Abstract:Thermo-mechanical Controlled Processing (TMCP) is one of the greatest achievements in steel industry in the 20th century, which, however, depends too much upon low temperature rolling for the refinement of austenite grains, causing great loss in terms of productivity. To overcome this disadvantage, a new processing route with ultra fast cooling as the core has been proposed, and pilot rolling and industrial trials were carried out. As compared to conventional accelerated cooling, the ultra fast cooling can achieve cooling rate up to 300°C/s for 3 mm thick strip and highly homogeneous cooling by the pressurized water spraying. In the present work, the metallurgical backgrounds for ultra fast cooling in thermo-mechanical processing were studied and elucidated. By the pilot hot rolling experiments with a lean composition of a typical 600 MPa grade high strength steel, it has been found that the application of ultra fast cooling (UFC) at the exit of hot rolling mills can improve the strength by as much as 100 MPa as compared to the conventional TMCP. The strengthening mechanism lies in that the ultra fast cooling immediately after hot rolling may further improve the strengthening effects by precipitation, grain refinement, and dislocation hardening. The theoretical calculations and experiments indicate that the grain refinement, dislocation hardening, and precipitation in the TMCP with in-front UFC have caused the strength increments of 36, 34 and 54 MPa over the conventional TMCP with ACC, respectively. The microstructure characterization showed that the density of high angle grain boundaries had been increased, and the average size of precipitates had been reduced from about 34 nm to 10 nm with the cooling pattern changing from ACC to the application of UFC. The theoretical estimation indicates that when the cooling profile is changed from the conventional ACC to UFC+ACC, and to UFC, precipitation strengthening accounts for more and more strength increment in the improved strength of hot rolled micro-alloyed steels.

The effects of thermo-mechanical control process on microstructures and mechanical properties of a commercial pipeline steel

EFFECT OF THERMOMECHANICAL CONTROL PROCESS ON MECHANICAL PROPERTY OF A LOW CARBON STEEL FOR LINE PIPE

Study on TRIP Effect of X65 Pipeline Steel

Effect of Tempering Temperature after Thermo-Mechanical Control Process on Microstructure Characteristics and Hydrogen-Induced Ductility Loss in High-Vanadium X80 Pipeline Steel

Effect of quenching and tempering heat treatment process on microstructure and properties of X100 pipeline steel

Precipitation Strengthening of Micro-Alloyed Steels Thermo-Mechanically Processed by Ultra Fast Cooling

Progress in thermomechanical control of steel plates and their commercialization

Development and Application of Thermo-mechanical Control Process Involving Ultra-fast Cooling Technology in China

Influence of TMCP Parameters on Structure and Properties of Low Carbon Cu Bearing Ultra-High Strength Steel

Experimental investigation on mechanical behaviours of TMCP high strength steel

Effect of heat treatment on the microstructure and mechanical properties of a low-carbon X80 pipeline steel

Effects of Thermo-mechanical Parameters on Microstructural and Mechanical Properties of API X70 Steel

Effect of Thermomechanical Controlled Processing on Microstructure and Cold Bending Properties of Automobile Beam Steel

EFFECT OF ACCELERATED COOLING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CONTROLLED ROLLED PIPE LINE STEELS

Thermal Effect of Welding on Mechanical Behavior of High-Strength Steel

Tensile Deformation and Fracture Behavior of API-5L X70 Line Pipe Steel

Variations in microstructure and mechanical properties along thickness direction in a heavy high strength low alloy steel plate

Effect of Deformation on Microstructure and Mechanical Properties of Medium Carbon Steel During Heat Treatment Process

Effect of Coiling Temperature on Microstructures and Precipitates in High-Strength Low-Alloy Pipeline Steel after Heavy Reduction during a Six-Pass Rolling Thermo-Mechanical Controlled Process

Dynamic Continuous Cooling Transformation Behavior Of A Novel Cu-Bearing Pipeline Steel

Processing and cooling effects on post-fire mechanical properties of high strength structural steels