Abstract:This paper investigates the leakage characteristics of brush seals including the flow field characteristic of brush seal and the effects of structural parameters on the leakage characteristic of brush seals with the consideration of bristle deflection. The flow field characteristic of brush seal was discussed based on three-dimensional (3-D) computational model of brush seal, two-way fluid–structure interaction and moving grid technique. Then the effect of structural parameters on the leakage characteristic of brush seals was investigated from theoretical and numerical simulation perspectives with the emphasis on an improved prediction formula of leakage flow rate of brush seals. As illustrated in the analysis of the leakage characteristics of brush seals, (1) the leakage with the influence of bristle deflection is closer to the results of experiment relative to that without bristle deflection, and increases with the increasing inlet/outlet pressure ratios, which validate the developed 3-D computational model with bristle deflection to be more reasonable; (2) the flow field characteristics (pressure and velocity) of brush seal are revealed reasonably; (3) with the increasing of the height of backing plate fence, the clearance of brush wire and the axial clearance between brush bristle and back plate, the leakage factor rises and then reaches a stable value when the clearance of brush is larger than 0.3 mm; moreover, (4) with the increase of brush wire diameter, the leakage factor decreases firstly and then tends to stabilization, while rapidly decreases at first, then slowly decreases, and lastly tends to a value when the bristle row number increases; (5) the reliability and accuracy of the proposed prediction equation for brush seals is validated to be high by the CFD computational results. The efforts of this paper provide a useful theoretical and numerical method to clearly understand the leakage characteristics of brush seal, which is beneficial to improve the design of brush seals.

Influence Of Geometry On Rotordynamic Coefficients Of Brush Seal

Performance Analysis of the Cylinder Gas Film Seal between Dual-Rotor Reverse Shafts Considering Lubrication and Centrifugal Expansion Effects

Numerical Analysis Of Dynamic Coefficients In Brush Seal

Using a Three-Dimensional Tube Bundle Model to Investigate the Leakage Flow Characteristics of the Rotating Brush Seal

Numerical Investigations on Influence Factors of Leakage Flow and Heat Transfer Characteristics of Brush Seal

Dynamic Coefficient Analysis of Labyrinth Seal Based on FLUENT

Effect of Bristle Pack Position on the Rotordynamic Characteristics of Brush-Labyrinth Seals at Various Operating Conditions

THE EFFECT OF THE SHAPE OF LABYRINTH SEALS ON ROTOR DYNAMIC COEFFICIENTS

Numerical Analysis of the Rotordynamic Coefficients for Annular Gas Seals

Numerical study of leakage flow characteristics in hybrid brush seal

Theoretical and Experimental Investigation on Tip Forces and Temperature Distributions of the Brush Seal Coupled Aerodynamic Force

Structural dynamic characteristics of brush seals in aeroengine

Experimental And Numerical Investigations On The Leakage Flow Characteristics Of The Labyrinth Brush Seal

Theoretical and Numerical Investigation on the Leakage Characteristics of Brush Seals Based on Fluid–structure Interaction

Numerical Investigations on the Leakage Flow Characteristics of Brush Seal Based on the 3D Staggered Tube Bundle Model

Labyrinth Seal Rotordynamic Characteristics Part I: Operational Conditions Effects

Investigation into the Flow Behavior of Multi-Stage Brush Seals

Investigations on the heat transfer characteristics of brush seals based on computational fluid dynamics and finite element analysis

Influence of Rub Groove on Rotordynamics Associated with Leakage Air Flow Through a Labyrinth Seal

Experimental and Numerical Investigations of the Leakage Characteristics of Two-Stage Brush Seal

Numerical Simulation on Rotordynamic Characteristics of Annular Seal under Uniform and Non-Uniform Flows