Computational Modeling and Experimental Validation of Thermal Stress and Melt Pool Characteristics Using High Power Laser Diode Beam on 7075 Aluminum Alloy
A. C. Umamaheshwer Rao,S. M. Shariff,V. Vasu,K. V. Sai Srinadh,P. Venkateshwar Reddy,Vijay Kumar Mahakur
DOI: https://doi.org/10.1007/s11665-024-09921-6
IF: 2.3
2024-08-21
Journal of Materials Engineering and Performance
Abstract:Lazing with a smaller beam causes overlapping of laser tracks, develops unwanted phases at overlapped interface regions, and adversely affects corrosion and mechanical properties. This study employs a finite element method to predict temperature distribution using high-power diode lasers with a 20 × 5 mm rectangular laser beam spot for efficient surface melting of 7075 Al alloy. The analysis focuses on the impact of laser energy density (120, 150, and 200 J/mm 2 ) on cooling rates and surface temperature. The effects of laser energy density for each irradiation spot-on temperature and stress field are investigated using the COMSOL model. Simulation results show a uniformly treated layer without inter-pass tracking effects, and the surface temperature remains above the critical temperature throughout processing for both 120, 150 J/mm 2 laser densities. The simulated melt depth for a sample lased with 150 J/mm 2 (2.45 mm) is shallower than the actual result (2.3 mm), and the simulated sample with 120 J/mm 2 energy density has a melt depth of 2.1 mm compared to the experimental measurement of 1.8 mm, while the sample lased with 200 J/mm 2 results in heavy undulations. A strong correlation is observed between the experimental and the finite element model results. SEM analysis and potentiodynamic polarization tests were also performed to understand microstructure evolution and corrosion behavior in the remelted layers.
materials science, multidisciplinary