Abstract:Industrial robots have become more diverse and common for automating manufacturing processes, such as welding. Existing robotic control, however, is incapable of adaptively adjusting its operation in response to a dynamic welding environment, whereas a skilled human welder can. Sophisticated and adaptive robotic control relies on the effective and efficient processing of perception data, characterization and prediction of highly dynamic systems, and real-time adaptative robotic reactions. This research presents a preliminary study on developing appropriate Machine Learning (ML) techniques for real-time welding quality prediction and adaptive welding speed adjustment for GTAW welding at a constant current. In order to collect the data needed to train the hybrid ML models, two cameras are applied to monitor the welding process, with one camera (available in practical robotic welding) recording the top-side weld pool dynamics and a second camera (unavailable in practical robotic welding, but applicable for training purpose) recording the back-side bead formation. Given these two data sets, correlations can be discovered through a convolutional neural network (CNN) that is good at image characterization. With the CNN, top-side weld pool images can be analyzed to predict the back-side bead width during active welding control. Furthermore, the monitoring process has been applied to multiple experimental trials with varying speeds. This allowed the effect of welding speed on bead width to be modeled through a Multi-Layer Perceptron (MLP). Through the trained MLP, a computationally efficient gradient descent algorithm has been developed to adjust the travel speed accordingly to achieve an optimal bead width with full material penetration. Because of the nature of gradient descent, the robot would change faster when the quality is further away and then fine-tune the speed when it was close to the goal. Experimental studies have shown promising results on real-time bead width prediction and adaptive speed adjustment to realize ideal bead width.

Self-Learning Fuzzy Neural Networks and Computer Vision for Control of Pulsed Gtaw

The Research On The Neuro-Fuzzy Network Control Strategy For Electric Discharge Machining Process

The Research On The Self Adaptive Fuzzy Control System For Electric Discharge Machining

Design of a hybrid adaptive fuzzy and neural network controller for nonlinear laser alloying process.

Possibilities of Artificial Intelligence-Enabled Feedback Control System in Robotized Gas Metal Arc Welding

Self-learning Fuzzy PID Controller Based on Neural Networks

Ti6A14V Laser Alloying Process Control by Using a Self-Organizing Fuzzy Controller

Hybrid Adaptive Fuzzy and Neural Network Controller for the Molten Steel Level Control in Strip Casting Processes.

A fuzzy logic controller designed based on CPN and its application

Welding Fuzzy Control System Based on Real-Time Measurements of the Temperature Field

Fuzzy NN Based Predictive Control and Its Application to Green Liquor System

Ti6Al4V laser alloying process monitoring by using adaptive neural network controller

Adaptive neural network controller for the molten steel level control of strip casting processes

Sensing and Control of Weld Pool Geometry for Automated GTA Welding

Self-organizing Fuzzy Controller for the Molten Steel Level Control of a Twin-Roll Strip Casting Process

Research on weld pool control of welding robot with computer vision

Adaptive Fuzzy Sliding-Mode Control for the Ti6al4v Laser Alloying Process

Fuzzy Neuron Control for Continuous Steel Casting

Vision Sensing and Feedback Control of Weld Penetration in Helium Arc Welding Process

Hybrid machine learning-enabled adaptive welding speed control

Single-variable intelligent control for bead shape of pulsed GTAW with wire filler