Abstract:The development of wearable thermoelectric generators (w-TEGs) toward light weight, economy and high power generation performance can provide more opportunities for their application in self-powered wearable electronics. The existing w-TEGs lack insight into the physical parameter coupling between the substrate and TE legs, which leads to inefficient utilization of temperature difference and deterioration of power generation performance. In this work, the comprehensive thermal management for heat collector, TE legs and heat radiator is carried out by finite element simulation. It is found that increasing the thermal conductivity of the substrates for heat collection and dissipation is conducive to reducing the optimal fill factor and substrate thickness, and improving the power density, thus facilitating the w-TEG to be both comfortable to wear, economical, and functional. Specifically, a laminated film with good flexibility prepared from polyimide (PI) film and graphene assembly film (GAF) acts as the substrate of w-TEG. The PI film compensates and enhances the mechanical strength of the laminated substrate; the GAF with large thermal conductivity reduces the in-plane and out-of-plane thermal resistance of the laminated substrate, which contributes to the heat collection of the bottom substrate; and the GAF with high emissivity enhances the radiative heat transfer and facilitates the heat dissipation of the top substrate, which is cut into blocks without affecting the electrical path to ensure overall flexibility of the w-TEG. When the w-TEG with laminated substrate and fill factor of 10% (four w-TEG units connected in series, 20 × 145 mm2 in plane) is worn on the wrist for running (contact pressure: 0 KPa, wind speed: 3 ms-1), the optimal output voltage and power density reach 281.6 mV and 45.6 μWcm-2, respectively, which is one of the best results among the recently reported heatsink-less w-TEGs. This work provides guidance for optimizing the output performance of w-TEG and accelerate the development of self-powered electronics.

Design, Fabrication and Feasibility Analysis of a Thermo-Electric Wearable Helmet

Comprehensive Performance Prediction and Power Promotion for Wearable Thermoelectric Generator with Flexible Encapsulation in Practical Application

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Wearable Thermoelectric Generator with Copper Foam As the Heat Sink for Body Heat Harvesting

High-Performance Wearable Bi2Te3-Based Thermoelectric Generator

A Theoretical Model for Wearable Thermoelectric Generators Considering the Effect of Human Skin

Comfortable wearable thermoelectric generator with high output power

Wearable thermoelectric generator for harvesting heat on the curved human wrist

An analytical model for wearable thermoelectric generators harvesting body heat: An opportunistic approach

Evaluation of the Power-Generation Capacity of Wearable Thermoelectric Power Generator

Scalable manufacturing durable, tailorable and recyclable multifunctional woven thermoelectric textile system

A Wearable Real-Time Power Supply with a Mg3Bi2-based Thermoelectric Module

Outdoor Personal Thermal Management with Simultaneous Electricity Generation

Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer

Optimized thermal design for excellent wearable thermoelectric generator

Ionic Gelatin-Based Flexible Thermoelectric Generator with Scalability for Human Body Heat Harvesting

A Fully Self-Powered Wearable Monitoring System with Systematically Optimized Flexible Thermoelectric Generator

Structural Design for Wearable Self-Powered Thermoelectric Modules with Efficient Temperature Difference Utilization and High Normalized Maximum Power Density

Multi-factor roadmap for designing wearable micro thermoelectric generators

Boosting Self-powered Wearable Thermoelectric Generator with Solar Absorber and Radiative Cooler