Abstract:The development of wearable thermoelectric generators (w-TEGs) toward light weight, economy and high power generation performance can provide more opportunities for their application in self-powered wearable electronics. The existing w-TEGs lack insight into the physical parameter coupling between the substrate and TE legs, which leads to inefficient utilization of temperature difference and deterioration of power generation performance. In this work, the comprehensive thermal management for heat collector, TE legs and heat radiator is carried out by finite element simulation. It is found that increasing the thermal conductivity of the substrates for heat collection and dissipation is conducive to reducing the optimal fill factor and substrate thickness, and improving the power density, thus facilitating the w-TEG to be both comfortable to wear, economical, and functional. Specifically, a laminated film with good flexibility prepared from polyimide (PI) film and graphene assembly film (GAF) acts as the substrate of w-TEG. The PI film compensates and enhances the mechanical strength of the laminated substrate; the GAF with large thermal conductivity reduces the in-plane and out-of-plane thermal resistance of the laminated substrate, which contributes to the heat collection of the bottom substrate; and the GAF with high emissivity enhances the radiative heat transfer and facilitates the heat dissipation of the top substrate, which is cut into blocks without affecting the electrical path to ensure overall flexibility of the w-TEG. When the w-TEG with laminated substrate and fill factor of 10% (four w-TEG units connected in series, 20 × 145 mm2 in plane) is worn on the wrist for running (contact pressure: 0 KPa, wind speed: 3 ms-1), the optimal output voltage and power density reach 281.6 mV and 45.6 μWcm-2, respectively, which is one of the best results among the recently reported heatsink-less w-TEGs. This work provides guidance for optimizing the output performance of w-TEG and accelerate the development of self-powered electronics.

Wearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems

Potentially Wearable Thermo‐Electrochemical Cells for Body Heat Harvesting: from Mechanism, Materials, Strategies to Applications

Review on Wearable Thermoelectric Generators: From Devices to Applications

Body Heat Powered Wirelessly Wearable System for Real‐time Physiological and Biochemical Monitoring

Reprint Of: Triboelectric Nanogenerator-Based Wearable Electronic Devices and Systems: Toward Informatization and Intelligence

Advanced Thermoelectric Textiles for Power Generation: Principles, Design, and Manufacturing

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Persistently Self-Powered Wearable Thermoelectric Generator Enabled by Phase-Change Inorganics As the Heat Sink

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Wearable Thermoelectric Generator with Copper Foam As the Heat Sink for Body Heat Harvesting

A Comprehensive Review of Thermoelectric Technology: Materials, Applications, Modelling and Performance Improvement

Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer

Design, Performance, and Application of Thermoelectric Nanogenerators.

Progress in Stretchable Fiber-Based Thermoelectric Materials and Devices

Advances of Thermoelectric Power Generation for Room Temperature: Applications, Devices, Materials and Beyond

Thermoelectric Materials and Devices for Advanced Biomedical Applications

Comprehensive Performance Prediction and Power Promotion for Wearable Thermoelectric Generator with Flexible Encapsulation in Practical Application

High-Performance Wearable Bi2Te3-Based Thermoelectric Generator

Flexible thermoelectric generator and energy management electronics powered by body heat

Optimized thermal design for excellent wearable thermoelectric generator

Body Heat Thermoelectric Energy Harvesting for Self-Powered Wearable Electronics