Abstract:This article proposes a novel spatial parallel kinematic mechanism with three kinematic limbs and 4 degrees of freedom. Its mobile platform can realize two translations and two rotation movements. Of note is that this mechanism can realize flexible A-/B-axis rotation (rotations about the x- and y-axes) and the transformation between vertical machining mode and horizontal machining mode. Using Tilt and Torsion angle description method, the kinematics analysis of this parallel kinematic mechanism is carried out. On this basis, the geometrical parameters, including parameters of three limbs and mobile platform, are optimized. In view of the particularity of configuration, the limb in the postposition with two active inputs is analyzed first and then the remaining two identical limbs. In the optimal design, motion/force transmissibility is taken into consideration, and the local transmission index is used as the performance evaluation criterion to investigate the orientation capability of this parallel kinematic mechanism. Using performance atlases method, the optimal kinematic design of the 4-degree-of-freedom parallel kinematic mechanism is carried out and a set of preferable optimized parameters is obtained at last. By virtue of the kinematic advantages, the proposed parallel kinematic mechanism can be used as the modular machining unit in five-axis machine centers. Based on this work, a machine tool with high flexibility has been developed to process the five faces of a workpiece within one setup.

Design of Reconfigurable Parallel Mechanisms with Discontinuously Movable Mechanism

Reconfigurable Generalized Parallel Mechanisms with Kinematotropic Linkages

Configuration switch and path selection between Schönflies motion and non-Schönflies motion based on quotient manifold of novel reconfigurable parallel mechanisms

A Kinematotropic Parallel Mechanism Reconfiguring Between Three Motion Branches of Different Mobility

A novel reconfigurable parallel mechanism constructed with spatial metamorphic four-link mechanism

Design and singularity analysis of a parallel mechanism with origami-inspired reconfigurable 5R closed-loop linkages

Analysis And Control For A New Reconfigurable Parallel Mechanism

Design and analysis of the gripper mechanism based on generalized parallel mechanisms with configurable moving platform

Construction and forward kinematics of a novel reconfigurable parallel mechanism

Kinematic Analysis and Multi-Objective Optimization of a New Reconfigurable Parallel Mechanism with High Stiffness.

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Design and Kinematic Analysis of a Novel Planar Parallel Robot With Pure Translations

Structure synthesis of 3-DOF translational parallel mechanisms with configurable platform of translation

Design and analysis of full-configuration decoupled actuating reconfigurable parallel spherical joint

Design and analysis of a class of two-limb non-parasitic 2T1R parallel mechanism with decoupled motion and symbolic forward position solution - influence of optimal arrangement of limbs onto the kinematics, dynamics and stiffness

Optimal Design of a Novel 4-Degree-of-freedom Parallel Mechanism with Flexible Orientation Capability

Optimization of a redundantly actuated parallel kinematic mechanism for a 5-degree-of-freedom hybrid machine tool

Synthesis of a Reconfigurable Mechanism and Its Kinematic Chains

Design And Kinematic Analysis Of A 2-Dof Spatial Parallel Mechanism With Flexible Orientation Capability

Some New Parallel Mechanisms Containing the Planar Four-Bar Parallelogram