Abstract:Abstract Over the past few years, the concept of multi-directional three-dimensional (3D) printing has been introduced to print complex shapes and overhang geometry. This technique requires the nozzle to constantly change orientation to print the object along its tangential direction. A six-degrees-of-freedom (6-DOF) robotic arm or Stewart platform can be a solution, but these mechanisms use more components and motors. An alternative solution has been proposed in this paper based on a four-CRU (cylindrical, revolute, and universal joints) mechanism. This mechanism can orient the nozzle by switching into different motion types with minimal numbers of motors while keeping the mechanism rigid and agile. Therefore, analyses of the reconfiguration, workspace, singularities, and self-motions of a four-CRU mechanism presented in this paper have become necessities. By using primary decomposition, four geometric constraints have been identified, and the reconfiguration analysis has been carried out in each of these. It reveals that each geometric constraint will have three distinct operation modes, namely Schönflies mode, reversed Schönflies mode, and an additional mode. The additional mode can either be a four-DOF mode or a degenerated three-DOF mode, depending on the type of geometric constraints. By taking into account the actuation and constraint singularities, the workspace of each operation mode has been analyzed and geometrically illustrated. It allows us to determine the regions in which the reconfiguration takes place. Furthermore, the inherent self-motion in the Schönflies mode is revealed and illustrated, which occurs at two specified actuated leg lengths. Demonstration of the reconfiguration process and self-motions is provided through a mock-up prototype.

Configuration switch and path selection between Schönflies motion and non-Schönflies motion based on quotient manifold of novel reconfigurable parallel mechanisms

Planar Closed Loop Double Chain Linkages

A Kinematotropic Parallel Mechanism Reconfiguring Between Three Motion Branches of Different Mobility

Design and singularity analysis of a parallel mechanism with origami-inspired reconfigurable 5R closed-loop linkages

A novel reconfigurable parallel mechanism constructed with spatial metamorphic four-link mechanism

Reconfigurable Generalized Parallel Mechanisms with Kinematotropic Linkages

Design and analysis of full-configuration decoupled actuating reconfigurable parallel spherical joint

Type synthesis of parallel mechanism with 3T/3R motion patterns

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

Finite displacement screw-based group analysis of 3PRS parallel mechanisms

Construction and forward kinematics of a novel reconfigurable parallel mechanism

Geometric Constraint-Based Reconfiguration and Self-Motions of a Four-CRU Parallel Mechanism

Analysis And Control For A New Reconfigurable Parallel Mechanism

The Synthesis of Planar Four-Bar Linkage for Mixed Motion and Function Generation

Design and Kinematic Analysis of a Novel Planar Parallel Robot With Pure Translations

Kinematic Analysis and Multi-Objective Optimization of a New Reconfigurable Parallel Mechanism with High Stiffness.

Grassmann line geometry based configuration synthesis of equivalent UU parallel mechanisms with two virtual center-of-motion

A replaceable-component method to construct single-degree-of-freedom multi-mode planar mechanisms with up to eight links

Symbolic position analysis for three 6-DOF parallel mechanisms and new insight

Type Synthesis of Non-Overconstrained and Overconstrained Two Rotation and Three Translation (2R3T) Parallel Mechanisms with Three Branched Chains

Motion Generation of Planar Six- and Eight-Bar Slider Mechanisms As Constrained Robotic Systems