Abstract:In this paper, we demonstrate a simple approach of self-assembled process to form a very smooth and compacted TiO2 underlayer film from ultrafine titanium oxide (TiO2) nanocrystals with dimension of 4 nm for improving the electrical properties and device performances of dye-sensitized solar cells (DSSCs). Because the TiO2 film self-assembles by simply casting the TiO2 on fluorine-doped tin oxide (FTO) substrate, it can save a lot of materials in the process. As compared with control DSSC without the self-assembled TiO2 (SA-TiO2) layer, short-circuit current density (J(sc)) improves from 14.9 mA/cm(2) for control DSSC to 17.3 mA/cm(2) for masked DSSC with the SA-TiO2 layer. With the very smooth SA-TiO2 layer, the power conversion efficiency is enhanced from 8.22% (control) to 9.35% for the DSSCs with mask and from 9.79% (control) to 11.87% for the DSSCs without mask. To explain the improvement, we have studied the optical properties, morphology, and workfunction of the SA-TiO2 layer on FTO substrate as well as the impedance spectrum of DSSCs. Importantly, we find that the SA-TiO2 layers have better morphology, uniformity, and contact with FTO electrode, increased workfunction and optical transmission, as well as reduced charge recombination at the contact of FTO substrate contributing to the improved device performances. Consequently, our results show that the simple self-assembly of TiO2 ultrafine nanocrystals forms a very good electron extraction layer with both improved optical and electrical properties for enhancing performances of DSSCs.

Low Temperature Transferring of Anodized Tio2 Nanotube-Array Onto A Flexible Substrate for Dye-Sensitized Solar Cells

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Low Temperature Transfer of Well-Tailored TiO2 Nanotube Array Membrane for Efficient Plastic Dye-Sensitized Solar Cells

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Synthesis of Long TiO2 Nanotube Arrays with a Small Diameter for Efficient Dye-Sensitized Solar Cells

Enhanced Performance of Dye-Sensitized Solar Cells based on TiO2 Nanotube Membranes using Optimized Annealing Profile

A facile route to fabricate an anodic TiO 2 nanotube-nanoparticle hybrid structure for high efficiency dye-sensitized solar cells

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

A novel TiO2 tape for fabricating dye-sensitized solar cells on universal conductive substrates.

Controllable fabrication and modulations on oxide nanotube arrays toward high performance solar cells

Substrate Diameter-Dependent Photovoltaic Performance of Flexible Fiber-Type Dye-Sensitized Solar Cells with TiO2 Nanoparticle/TiO2 Nanotube Array Photoanodes

Controllable Preparation of TiO2 Nanowire Arrays on Titanium Mesh for Flexible Dye-Sensitized Solar Cells

Ordered TiO2 Nanotube Arrays on Transparent Conductive Oxide for Dye-Sensitized Solar Cells

Facile Fabrication of Open-Ended TiO2 Nanotube Arrays with Large Area for Efficient Dye-Sensitized Solar Cells

High-Temperature Annealing of TiO2 Nanotube Membranes for Efficient Dye-Sensitized Solar Cells

Improved Anatase Phase Stability in Small Diameter TiO2 Nanotube Arrays for High Performance Dye-Sensitized Solar Cells

Selective Laser Sintering Of Tio2 Nanoparticle Film On Plastic Conductive Substrate For Highly Efficient Flexible Dye-Sensitized Solar Cell Application

High-efficiency dye-sensitized solar cells based on robust and both-end-open TiO2 nanotube membranes

Fabrication and Stability of Opened-End TiO2 Nanotube Arrays Based Dye-Sensitized Solar Cells

Tunable Fabrication of TiO2 Nanotube Arrays with High Aspect Ratio and Its Application in Dye Sensitized Solar Cell

Well-Aligned Tio2 Nanorod Arrays Prepared by Dc Reactive Magnetron Sputtering for Flexible Dye-Sensitized Solar Cells