Close-in blast performance of RC beams with varying cross-sectional sizes and damage assessment based on the dynamic load carrying capacity
Yingliang Xu,Yan Liu,Fenglei Huang,Junbo Yan
DOI: https://doi.org/10.1016/j.engfailanal.2024.108305
IF: 4
2024-04-16
Engineering Failure Analysis
Abstract:Aiming to investigate the impact of cross-sectional size on the close-in blast performance of reinforced concrete (RC) beams, the local damage features and structural responses of RC beams with varying cross-sectional widths and depths subjected to close-in explosions were investigated experimentally and numerically. Experiments were conducted on ten RC beams with a cross-sectional size of 25 cm × 12.5 cm to study the influence of scaled distance and charge mass on the local damage size and structural responses (displacement and reaction force). The results indicate that the blasting face damage to tested beams, such as the crushing crater of concrete cover and side peeling-off damage, is more sensitive to the scaled distance (intensity of applied blast loads) compared to the rear spalling damage. And the peak reaction force exhibited a gradual increase within the range of 0.5 m/kg 1/3 , eventually reaching an average maximum value of 93.5 kN, and remained unchanged after the scaled distance was greater than 0.5 m/kg 1/3 , indicating that the dynamic load-carrying capacity of tested beams increased with the increasing scaled distance and the maximum dynamic load-carrying capacity of these beams is around 93.5 kN. Furthermore, a numerical model of RC beams subjected to close-in explosions was established based on the Fluid-Structure-Interaction (FSI) method. For validation, the local damage morphology and sizes of RC beams and their dynamic responses (displacement and reaction force) were computed and compared with the corresponding experimental results, concluding that the numerical results are in good agreement with the experimental findings. A parametric analysis was conducted to study the impact of cross-sectional size on the development process of initial local damage, stress distribution in cross sections, local damage sizes, and structural responses. Moreover, a damage index of the dynamic load-carrying capacity was derived from the relationship between the normalized maximum reaction force and the normalized maximum displacement to assess the damage degree of RC beams with varying cross-sectional sizes. This work can serve as a partial reference for relevant research.
engineering, mechanical,materials science, characterization & testing