Abstract:Aiming to investigate the impact of cross-sectional size on the close-in blast performance of reinforced concrete (RC) beams, the local damage features and structural responses of RC beams with varying cross-sectional widths and depths subjected to close-in explosions were investigated experimentally and numerically. Experiments were conducted on ten RC beams with a cross-sectional size of 25 cm × 12.5 cm to study the influence of scaled distance and charge mass on the local damage size and structural responses (displacement and reaction force). The results indicate that the blasting face damage to tested beams, such as the crushing crater of concrete cover and side peeling-off damage, is more sensitive to the scaled distance (intensity of applied blast loads) compared to the rear spalling damage. And the peak reaction force exhibited a gradual increase within the range of 0.5 m/kg 1/3 , eventually reaching an average maximum value of 93.5 kN, and remained unchanged after the scaled distance was greater than 0.5 m/kg 1/3 , indicating that the dynamic load-carrying capacity of tested beams increased with the increasing scaled distance and the maximum dynamic load-carrying capacity of these beams is around 93.5 kN. Furthermore, a numerical model of RC beams subjected to close-in explosions was established based on the Fluid-Structure-Interaction (FSI) method. For validation, the local damage morphology and sizes of RC beams and their dynamic responses (displacement and reaction force) were computed and compared with the corresponding experimental results, concluding that the numerical results are in good agreement with the experimental findings. A parametric analysis was conducted to study the impact of cross-sectional size on the development process of initial local damage, stress distribution in cross sections, local damage sizes, and structural responses. Moreover, a damage index of the dynamic load-carrying capacity was derived from the relationship between the normalized maximum reaction force and the normalized maximum displacement to assess the damage degree of RC beams with varying cross-sectional sizes. This work can serve as a partial reference for relevant research.

Experimental study on scaling of RC beams under close-in blast loading

Close-in blast performance of RC beams with varying cross-sectional sizes and damage assessment based on the dynamic load carrying capacity

Investigation on Damage Mechanism of RC Column under Close-in Explosion

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Numerical analysis of the local damage of RC beams under close‐in explosions based on the calibrated Karagozian & Case (K&C) concrete model

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Research of Loading Effects of Blast in Air

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Damage of Full‑scale Reinforced Concrete Beams under Contact Explosion

Mechanism Analysis for Scaling Effect on the Impact Behaviors of RC Beam: from Material Properties to Component Response

Analysis model for damage of reinforced bars in RC beams under contact explosion

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Blast Resistance of Small-Scale RCS in Experimental Test and Numerical Analysis

Residual axial capacity of circular reinforced concrete columns subjected to contact explosions

Spallation Mechanism of RC Slabs under Contact Detonation

Blast performance of RC columns with different levels of concrete grades and reinforcing ratios

Numerical analysis of axial load effects on RC bridge columns under blast loading

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Modification of SDOF model for reinforced concrete beams under close-in explosion