Abstract:Phase sensitive optical time domain reflectometry (Φ-OTDR) has been widely used in many applications for its distributed sensing ability on weak disturbance all along the sensing fiber. However, traditional Φ-OTDR cannot make quantitative measurement on the external disturbance due to the randomly distributed position and reflectivity of scatters within the optical fiber. Recently, some methods have been proposed to realize quantitative measurement of dynamic strain. In these literatures, the fiber with or without FBGs in practice was easily damaged and with difficulty of maintenance. PZT is employed to generate strain event in the fiber. There is a large gap compared with the real detecting environment, which will not reveal the full performance of the sensing system. In this paper, a distributed optical fiber sensing (DOFS) system for dynamic strain measurement based on artificial reflector is proposed and demonstrated experimentally. The fiber under test (FUT) is composed by four 20-meter long single mode optical fiber patch cords (OFPCs), which are cascaded with ferrule contactor/physical contact (FC/PC) connectors via fiber flanges. The fiber facet of FC/PC connector forms an artificial reflector. When the interval between the two reflectors is changed, the phase of the interference signal will also be changed. A symmetric 3×3 coupler with table-look-up scheme is introduced to discriminate the phase change through interference intensity. In our experiment, the center 10m section of the second OFPC is attached to the bottom of an aluminum alloy plate. An ordinary loudspeaker box was located on the top of the aluminum alloy plate. The dynamic strain generated by the loudspeaker box is transmitted from the aluminum alloy plate to the OFPC. Experimental results show that the proposed method has a good frequency response characteristic up to 3.2 kHz and a linear intensity response of R2=0.9986 while the optical probe pulse width and repetition rate were 100ns and 10 kHz respectively. Meanwhile, triangle and cosine amplitude-modulated (AM) dynamic strain applied on the fiber are successfully discriminated. The artificial reflectors based on FC/PCs were easily assembled and maintained, and the method of vibration transmission closely resembled the real circumstance than PZT. Therefore, these advantages will extend the potential of this Φ-OTDR technology in structure health monitoring.

Fiber Optic Displacement Measurement Model Based on Finite Reflective Surface

Research of a Reflective Fiber-Optic Displacement Sensor with Intensity Compensation

A Novel Fiber Optic Displacement Sensor Based on Reflected Light Intensity

A Novel Optical Fiber Displacement Measurement System

An Optical Fiber Lateral Displacement Measurement Method and Experiments Based on Reflective Grating Panel.

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Multimode-interference-effect-based all-fiber displacement sensing system for an orthopedic Ilizarov apparatus device.

Transmissive Fiber Optical Displacement Sensor Using Cutting Plate

Design and Operation of a Transmissive Plastic Fiber Optical Displacement Sensor

Research on Internal Surface Measurement and Adaptive Sampling Process Based on Fiber-Optic Sensor Technique

A Fiber-Based Chromatic Dispersion Probe for Simultaneous Measurement of Dual-Axis Absolute and Relative Displacement

Fiber Optic Displacement Monitoring in Laboratory Physical Model Testing

Design of a Reflective Intensity Optical Fibre Bundle Displacement Sensor

Analysis and Design of Fiber Microprobe Displacement Sensors Including Collimated Type and Convergent Type for Ultra-Precision Displacement Measurement

Experimental analysis of fiber-optic displacement sensors

A Fiber-Based Chromatic Dispersion Probe for Simultaneous Measurement of X-Axis and Z-Axis Displacements with Nanometric Resolutions

A Distributed Optical Fiber Sensing System for Dynamic Strain Measurement Based on Artificial Reflector

An Optical Fiber Heterodyne Interferometry Displacement Sensor.

Optimizing Algorithm for Existing Fiber-Optic Displacement Sensor Performance

Strain transfer mechanism in surface-bonded distributed fiber-optic sensors subjected to linear strain gradients: Theoretical modeling and experimental validation

Optical Fiber Displacement Sensing System Based on Dual-Wavelength with Single-Wavelength Interferometry